Machines in our stock
In this list you will find all available machines in our stock.
UM 27.292.11449
2 VAN DE WIELE SECOND HAND WEAVING MACHINES DESIGNED as FACE TO FACE LOOMS MODEL MPS-32-WIDTH 2100 MM with 2 STÄUBLI MECHANICAL JACQUARD HEADS MODEL CR 520 with 1'320 HOOKS EACH-YEAR of CONSTRUCTION 1988
0.00
- not spec -
2010-09-03
UM 27.292.11450
4 VAN DE WIELE SECOND HAND WEAVING MACHINES DESIGNED as FACE TO FACE LOOMS for VELEVET JACQUARD FABRIC PRODUCTION MODEL MPS-32-WORKING WIDTH 1750 MM and EACH with 2 GROSSE MECHANICAL JACQUARD MACHINES with 1320 plus 2680 HOOKS-YEAR of CONSTRUCTION 1985
0.00
- not spec -
2010-09-03
UM 41.131.11451
1 MAHLO SECOND HAND WEFT STRAIGHTENING MACHINE DESIGNED as AUTOMATIC WEFT STRAIGHTNER for WIDER WIDTH WOVEN FABRICS MODEL RFMC-78-S- WORKING WIDTH 4200 MM with 8 SENSO HEADS - YEAR of CONSTRUCTION 1986
0.00
- not spec -
2010-09-03
UM 34.134.11452
1 OSTHOFF SECOND HAND COMPLETE SINGEIN LINE DESIGNED for WOVEN FABRICS MODEL U97/3-WORKING WIDTH 2200 MM with 2 SINGEING BURNERS type DOUBLE JETwith TILTING and INCINATION AUTOMATICS SYSTEM-HIGH ENTRANCE with DOGAL CORINO-DOUBLE BRUSH-YEAR 2005
0.00
EURO
FOT
2010-09-03
UM 27.62.11181
2 DORNIER SECOND HAND WEAVING MACHINE DESIGNED as AIR JET LOOMS MODEL LWF 4S - NOMINAL WIDTH 3300 MM-SINGLE EBAMS-4 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2667 with 16 SHAFTS-YEAR of CONSTRUCTION 1995
0.00
- not spec -
2010-09-02
UM 23.41.11301
1 SCHLAFHORST SECOND HAND SPINNING MACHINE DESIGNED as OPEN- END SPINNING FRAME for LABORATORY MODEL AUTOCORO ACO 240 SRK with 24 ROTORS-USTER POLIGUARD CLEARING - WAXING DEVICE - CYLINDRICAL TAKE-UP - YEAR of CONSTRUCTION 1993
0.00
C&F
2010-09-02
UM 36.95.11448
1 BUSER SECOND HAND COMPLETE PRINTING PLANT DESIGNED as ROTATION PRINTING MACHINE MODEL ROTOMAC 4 E 1850/12/12-PRINTING WIDTH 1850 MM-12 COLOURS-REPEATS 641 - 1018 MM with DRYING SECTION MODEL R319 2010 THERMAL OIL HEATED-YEAR of CONSTRUCTION 1990
0.00
ex mill floor
2010-09-02
UM 27.60.11066
2 VAMATEX SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL 9000 plus ES-WORKING WIDTH 3600 MM-SINGLE BEAMS-8 COLOURS with STÄUBLI ELECTRONIC DOBBY with 24 SHAFTS-YEAR of CONSTRUCTION 1998
0.00
- not spec -
2010-09-01
UM 27.60.11247
3 VAMATEX SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS for JACQUARD WEAVE MODEL 9000 PLUS-WORKING WIDTH 3000 MM-SINGLE BEAMS-8 COLOURS with BONAS ELECTRONIC JACQUARD MODEL ASJ 4 for 2'688 HOOKS-YEAR of CONSTRUCTION 1995
0.00
- not spec -
2010-09-01
UM 27.62.11276
4 DORNIER SECOND HAND WEAVING AUTOMATES DESIGNED as AIR JET WEAVING MACHINES MODEL AWS 8/S-NOMINAL WIDTH 1900 MM-8 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2871 with 10 SHAFTS-YEAR of CONSTRUCTION 2005 & 2006
0.00
EURO
C&F
2010-09-01
UM 27.60.11354
8 SULZER SMIT SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL G6300 340 N4 SP-WORKING WIDTH 3400 MM-FULL WIDTH BEAMS-4 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2670 with 16 SHAFTS-YEAR of CONSTRUCTION 2001
0.00
EURO
ex mill floor
2010-09-01
UM 27.62.11446
23 VAMATEX SECOND HAND WEAVING MACHINES DESIGNED as AIR JET LOOMS MODEL TYPHOON - WORKING WIDTH 1900/2600 MM-2 COLOURS with CAM MOTION and FIMTESSILE ELECTRONIC DOBBY with 6 SHAFTS-YEAR of CONSTRUCTION 1992
0.00
- not spec -
2010-09-01
UM 27.62.11447
7 DORNIER SECOND HAND WEAVING MACHINES DESIGNED as AIR JET LOOMS MODEL LWV 4 S/S-NOMINAL WIDTH 1900 MM-4 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2580 RS for 12 SHAFTS-YEAR of CONSTRUCTION 1996
0.00
- not spec -
2010-09-01
UM 35.88.11445
1 BRAZZOLI SECOND HAND DYE APPARUS DESIGNED as HIGH TEMPERATURE DYEING MACHINE for HEAVY FABRICS as well as TERRY TOWEL or FURNITURE FABRICS MODEL SATURNO HTFA 400 with TWO ROPES each 200 KG CAPACITY-YEAR of PRODUCTION 2001
0.00
EURO
ex mill floor
2010-08-31
UM 25.119.11037
1 RIETER SECOND HAND COMPLETE SPINNING MILL DESIGNED as RING SPINNING PLANT for COMBED YARNS of 9'216 SPINDLES with BLOW ROOM-10 CARDS C51-5 x D10/D35-6 COMBERS E72/1-3 FLYERS-8 SPINN FRAMES of G33 & K40/44-WINDERS and EQUIPMENTS-YEAR 2000/2005
0.00
EURO
ex mill floor
2010-08-30
UM 27.62.11444
10 PICANOL SECOND HAND WEAVING MACHINES DESIGNED as AIR JET LOOMS MODEL OMNI 2 P 190 -WORKING WIDTH 1900 MM-2 COLOURS with STÄUBLI CAM MOTION - YEAR of CONSTRUCTION 1998
0.00
EURO
C&F
2010-08-27
UM 23.42.10994
5 VORTEX MURATA SECOND HAND SPINNING MACHINES DESIGNED as AIR JET SPINNING FRAMES MODEL MVS 851 with 72 SPINDELS each-EXIT BOBBIN CYCLINDRICAL-WAXING DEVICE-MURATA CLEARER-YEAR of CONSTRUCTION 1999/2002
0.00
EURO
FOB
2010-08-26
UM 22.34.11118
1 THIBEAU SECOND HAND CARDING MACHINE DESIGNED as SEMIWORSTED CARD MODEL CA 5 -WORKING WIDTH 2500 MM with HOPPE FEEDER - SWIFT SECTION etc. YEAR of CONSTRUCTION 1986 approx.
0.00
EURO
ex mill floor
2010-08-26
UM 22.36.11341
6 MARZOLI SECOND HAND FLYER MODEL BC16 with 116 SPINDLES each - CAN CREEL - SENSORS in ENTRY and EXIT - DRAFTING DECICE SKF PK 1500-SEMI AUTOMATIC DOFFING-YEAR of CONSTRUCTION 1986/87
0.00
EURO
FOT
2010-08-26
UM 24.333.10263
1 CROON & LUCKE SECOND HAND BALLING MACHINE MODEL 160 each 16 POSITIONS with MANDRELS of 130/44 - OUTSTANDING CREEL (K1600)-SPECIAL GEAR FOR PARALLEL WOUNDED BALLS-YEAR of CONSTRUCTION 1981
0.00
EURO
FOT
2010-08-25
UM 25.119.11309
1 RIETER & TRÜTZSCHLER SECOND HAND COMPLETE SPINNING LINE DESIGNED as RING SPINNING MILL of 9'600 SPINDLES with 6'000 KG/DAY CAPACITY COMPOSED with BLOW ROOM-8 CARDS DK 903/803-DRAWING SECTION RIETER-FLYER ZINSER-ZINSER SPINNING FRAMES 351-YEAR 2002/2003
0.00
EURO
ex mill floor
2010-08-25
UM 27.62.11349
46 SOMET SECOND HAND WEAVING MACHINES DESIGNED as AIR JET LOOMS for WIDER WIDTH WEAVE MODEL MYTHOS-WORKING WIDTH 3400 MM-SINGLE BEAM EXECUTION-2/4 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2861 - 12 SHAFTS-YEAR of CONSTRUCTION 2000/2002
0.00
EURO
C&F
2010-08-25
UM 23.41.11443
4 RIETER ELITEX SECOND HAND SPINNING AUTOMATES DESIGNMED as ROTOR SPINNING FRAMES MODEL BT 905 with 240/288 ROTORS - INDIVIDUAL SIDES - 2 ROBOTS - ELECTRONIC INVERTER - WAXING DEVICE-YEAR of CONSTRUCTION 2000/2001
0.00
- not spec -
2010-08-25
UM 26.170.11300
1 BENNINGER SECOND HAND COMPLETE SIZING RANGE MODEL BEN-SIZETEC with DIRECT WARPER of 1800 MM and CREEL- HEAD STOCK WORKING WIDTH 3400 MM max. - 10 DRYING CANS - YEAR of CONSTRUCTION 2000
0.00
EURO
FOT
2010-08-24
UM 22.39.11412
1 NSC SCHLUMBERGER SECOND HAND INTERSECTING MACHINE MODEL GC 15 with ONE COMB HEAD with CHAIN-DELIVERY TWO BOBBINS with AUTOMATIC DOFFING-YEAR of CONSTRUCTION 2000
0.00
EURO
C&F
2010-08-24
UM 27.63.11441
40 TSUDAKOMA SECOND HAND WEAVING MACHINES DESIGNED as WATER JET LOOMS MODEL ZW 303 - WORKING WIDTH 1900 MM - SINGLE COLOUR with YAMADA MECHANICAL DOBBY MODEL GD 30 -16 SHAFTS-YEAR of CONSTRUCTION 1988
0.00
C&F
2010-08-24
UM 27.63.11442
28 TSUDAKOMA SECOND HAND WEAVING MACHINES DESIGNED as WATER JET LOOMS MODEL ZW 303 - WORKING WIDTH 1900 MM-2 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2561 - 16 SHAFTS - YEAR of CONSTRUCTION 1992
0.00
C&F
2010-08-24
UM 27.61.11440
51 SULZER LICENCED SECOND HAND WEAVING MACHINES DESIGNED as PROJECTILE LOOMS MODEL STB 330 -WORKING WIDTH 3300 MM-SPLIT BEAM ARRANGEMENT- 2 COLOURS with CAM MOTION - YEAR of CONSTRUCTION between 1986 and 1992
0.00
C&F
2010-08-23
UM 35.84.11343
1 DORNIER SECOND HAND COMPLETE MERCERISING PLANT DESIGNED as CONTINIOUS MERCERSIER for TUBULAR FABRICS-WORKING WIDTH 1500 MM with EXPANDING SENSOR-AIRSTEP REAX COMPENSATOR-WASHING COMPARTMENTS-LEYE STATION and DOSING SYSTEM-YEAR of CONSTRUCTION 1993
0.00
- not spec -
2010-08-20
UM 35.85.11344
1 MONFORTS SECOND HAND SONFORISING PLANT DESIGNED for WOVENS and KNITTED GOODS MODEL TOPTEX W-WORKING WIDTH 2200 MM with SHRINKING UNIT-STEAMER-RUBBER CALANDER-COOLING CYLINDER-YEAR of CONSTRUCTION 1989
0.00
- not spec -
2010-08-20
UM 34.105.11350
1 SUCKER & MÜLLER SECOND HAND RAISING MACHINE DESIGNED for WOVENS- and KNITTED GOODS MODEL POLIFLEECE TRI 24N-WORKING WIDTH 2300 MM with TANDEMATIC EDGE UNCURLING DEVICE-24 RAISING ROLLERS-INVERTER-YEAR of CONSTRUCTION 1999
0.00
- not spec -
2010-08-20
UM 34.202.11351
1 BIANCO SECOND HAND and UNUSED BRAND NEW COMPACTION RANGE DESIGNED as COMPACTING CALENDAR for KNITTED GOODS - WORKING WIDTH 2400 MM with CENTERING DEVICE DOGAL-DANCING ROLLER- STEAMING BOX-STEAM CHANNELS-SHRINKING UNITS-PAITER-YEAR of CONSTRUCTION 2010
0.00
EURO
ex work
2010-08-20
UM 24.333.11177
1 OTTKO SECOND HAND AUTOMATIC BALLING MACHINE MODEL KW 765 with 16 POSITIONS with AUTOMATIC TUBE FEEDER-AUTOMATIC TUBE FEEDER each SPINDLE-AUTOMATICE LABEL HEAD TRANSPORT-SPINDLE STOP and AUTO DOFFING-YEAR of CONSTRUCTION 1983
0.00
EURO
FOT
2010-08-19
UM 22.34.11429
2 RIETER SECOND HAND CARDING MACHINES MODEL C4 with AEROFEED - MANUAL CAN CHANGER - YEAR of CONSTRUCTION 1985
0.00
C&F
2010-08-19
UM 35.156.11439
2 THEN SECOND HAND DIFFERENT DYE APPARATUSES DESIGNED as PIECE DYEING- and PIECE/TUBE DYEING MACHINE MODEL FHT 340 of 2 x 2450 - COUPLED - AUXILIARY TANK and AREL CONTROLLER - YEAR of CONSTRUCTION 1991 and 1993
0.00
ex mill floor
2010-08-19
UM 27.60.11167
62 VAMATEX SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL C 401 C-WORKING WIDTH 1900 MM-2 COLOURS-FIMTESSILE MECHANICAL DOBBY with 20 SHAFTS-YEAR of CONSTRUCTION 1984
0.00
EURO
C&F
2010-08-18
UM 24.333.11178
1 JBF SECOND HAND AUTOMATIC BALLING MACHINE MODEL KW 765 R with 20 BALLING POSITIONS with AUTOMATIC TUBE FEEDER on each SPINDLE-CONVEYOR-AUTOMATIC DOFFING-AUTO HEAD LABLE TRANSPORT-YEAR of CONSTRUCTION 1985
0.00
EURO
ex mill floor
2010-08-18
UM 34.134.11385
1 JULIEN SECOND HAND FINISHING PLANT DESIGNED as SINGEING MACHINE-WORKING WIDTH 2000 MM with GUIDERS-BRUSHING MOTION-2 BURNERS for BOTH FABRIC SIDES-DESIZING TANK in BIG VERSION EXECUTED in STAINLESS STEEL-YEAR of CONSTRUCTION 1991
0.00
EURO
ex mill floor
2010-08-17
UM 27.62.11438
9 PICANOL SECOND HAND WEAVING AMCHINES DESDIGNED as AIR JET LOOMS MODEL OMNI 4 R 190-WORKING WIDTH 1900 MM-4 COLOURS with STÄUBLI DOBBY MODEL 2580 C for 16 SHAFTS-YEAR of CONSTRUCTION 1998
0.00
EURO
C&F
2010-08-17
UM 34.134.11207
1 OSTHOFF SECOND HAND SINGEING- and DESIZING LINE MODEL U 80-WORKING WIDTH 1800 MM with BRUSHING/BEATING DEVICE-2 BURNERS DOUBLE JET with AUTOMATIC SELF-TURNING MOTION-YEAR of CONSTRUCTION 1986
0.00
EURO
FOT
2010-08-16
UM 22.34.11333
1 RIETER SECOND HAND CARDING MACHINE MODEL C51 H with AERO FEED A 70 - COILER in FRONT - GRAF WIRES and STATIONARY FLATS- YEAR of CONSTRUCTION 2000
0.00
EURO
C&F
2010-08-16
UM 27.61.11436
1 SULZER RÜTI SECOND HAND WEAVING MACHINE DESIGNED as PROJECTILE LOOM for WIDER WIDTH WEAVE MODEL P7100 540 N4 SP R-WORKING WIDTH 5400 MM in FULL WIDTH BEAM EXECUTION-4 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2665 with 10 SHAFTS-YEAR 1992
0.00
EURO
ex mill floor
2010-08-16
UM 27.62.11437
13 PICANOL SECON HAND WEAVING MACHINES DESIGNED as AIR JET LOOMS MODEL OMNI PLUS 2 R 220-WORKING WIDTH 2200 mm- 2 COLOURS with STÄUBLI ELECTRONIC DOBBY -16 SHAFTS-YEAR of CONSTRUCTION 2002/2003
0.00
EURO
C&F
2010-08-16
UM 24.53.11012
1 MURATA SECOND HAND TWISTING MACHINE DESIGNED as TWO for ONE TWISTER MODEL 373-II with 144 POSITIONS-FEEDING POT Ø 188 MM-PNEUMATIC THREADING - YEAR of CONSTRUCTION 1995
0.00
EURO
C&F
2010-08-13
UM 22.197.11432
1 NSC SCHLUMBERGER SECOND HAND COMPLETE LONG STABLE FIBER PREPARATION LINE COMPOSED of FIRST PASSAGE MODEL GC 12 with BLENDER-SECOND PASSAGE MODEL GC 12 with AUTOCANCANGE and THIRD PASSAGE MODEL GC 15 DESIGNED as FINISHER-YEAR of CONSTRUCTION 1986/83 & 99
0.00
- not spec -
2010-08-13
UM 22.197.11433
1 NSC SCHLUMBERGER SECOND HAND COMPLETE LONG STABLE FIBER PREPARATION LINE COMPOSED of FIRST PASSAGE MODEL GC 12 with AUTOCAN-SECOND PASSAGE MODEL GC 12 with AUTOCANCANGE and THIRD PASSAGE SANT'ANDREA DESIGNED as FINISHER MODEL SH 24 + FLYER-YEAR 1987
0.00
- not spec -
2010-08-13
UM 36.95.11434
1 JOHANNES ZIMMER SECOND HAND PRINTING RANGE DESIGNED as ROTATION PRINTER for SILK MODEL KP - R / 39 - PRINTING WIDTH 1800 MM EQUIPPED with 8 COLOURS and COMPLETE with DRYING SECTION DIRECT GAS HEATED-YEAR of CONSTRUCTION 1992-YEAR of RECONDITION 2004
0.00
- not spec -
2010-08-13
UM 34.108.11435
1 SALVADE SECOND HAND DRYING RANGE DESIGNED as LOOP DRYER for PRINTED SILK FABRICS - CAPACITY 120 METER - WORKING WIDTH 1800 MM - DESIGNED for WORKING with STEAM or DIATHERMIC OIL - YEAR of CONSTRUCTION 1990
0.00
- not spec -
2010-08-13
UM 34.168.11036
1 DETTIN SECOND HAND but UNUSED HYDROEXTRACTOR RANGE DESIGNED for YARN MODEL BERTA 24-32 T/E with LOADING CAPACITY of 32 CONES EVERY DRY CYCLE-DIMENSIONS 230 MM Ø x 170 MM HEIGHT-FREQUENCY INVERTER CONTROLLED-YEAR of CONSTRUCTION 2006
0.00
EURO
FOT
2010-08-12
UM 23.41.11421
2 SCHLAFHORST SECOND HAND SPINNING AUTOMATES DESIGNED as OPEN- END SPINNING MACHINES MODEL AUTOCORO AC 288 SRK, EACH with 288 ROTORS with SPIN BOX type SE 11-COROLAB-WAXING DEVICE-2 ROBOTS-YEAR of CONSTRUCTION 2001
0.00
EURO
C&F
2010-08-12
UM 26.58.11431
1 HACOBA SECOND HAND WARPING RANGE DESIGNED as DIRECT WARPER MODEL NH 2 1000 A - WORKING WIDTH 2100 MM DESIGNED for WARP BEAM FLANGES Ø 1000 MM with HACOBA CONE CREEL - 640 ENDS- YEAR of CONSTRUCTION 1992
0.00
EURO
FOT
2010-08-12
UM 26.170.11426
1 SUCKER MÜLLER & HACOBA SECOND HAND COMPLETE PREPARATION LINE COMPOSED of HACOBA WARPING MACHINE DESIGNED as DIRECT WARPER of 2100 MM with CREEL - SIZING PLANT WORKING WIDTH 1800 MM with SIZE BOX and DRYING 5 TEFLONISED DRYING CYLINDERS-YEAR 1992
0.00
EURO
C&F
2010-08-11
UM 41.308.11427
1 BIANCO SECOND HAND ROPE OPNER DESIGNED for BIG BATCH WINDER and A-FRAME - WORKING WIDTH 3400 MM - YEAR of CONSTRUCTION 1984
0.00
- not spec -
2010-08-11
UM 22.36.11428
2 ZINSER SECOND HAND FLYER MODEL 670, EACH with 96 POSITIONS - DRAFTING SYSTEM SKF PK 1500 - AUTOMATIC DOFFING - YEAR of CONSTRUCTION 2000
0.00
- not spec -
2010-08-11
UM 35.166.11286
2 MEZZERA SECOND HAND JIGGERS MODEL VGM MARS 1050 - WORKING WIDTH 1800 MM - WINDING Ø 1050 MM - STEAM HEATING - WASHING DEVICE by DOUBLE NOZZLES - PENDEL DEVICE at the END of THE DYEING-YEAR of CONSTRUCTION 2000
0.00
EURO
FOT
2010-08-10
UM 35.166.11291
2 M.C.S SECOND HAND DYE JIGGER MODEL MID JIG-E - WORKING WIDTH 1850 MM-WINDING Ø 1100 MM-ELECTRONIC DRIVE with FREQUENCY INVERTER-AUTOMATIC MOTION-SELVEDGE CENTERING-WASHING DEVICE-RECYCLING PUMP-YEAR of CONSTRUCTION 2005
0.00
EURO
FOT
2010-08-10
UM 27.60.11418
10 SULZER RÜTI SECOND HAND DIFFERENT WEAVING MACHINES DESIGNED as RAPIER LOOMS for COTTON TERRY WEAVING MODEL G6100 B190 N1/4 EP/SP-WORKING WIDTH 1900 MM-1/4 COLOURS with CAM MOTION/STÄUBLI ELECTRONIC DOBBY-YEAR of CONSTRUCTION 1993/1994
0.00
EURO
C&F
2010-08-10
UM 27.62.11425
2 DORNIER SECOND HAND WEAVING AUTOMATES DESIGNED as AIR JET WEAVING MACHINES MODEL AWS 4 / E-NOMINAL WIDTH 1900 MM-4 COLOURS with STÄUBLI CAM BOX MODEL 1661 - 8 LEVERS-YEAR of CONSTRUCTION 2004
0.00
- not spec -
2010-08-10
UM 26.59.11179
1 SUCKER & MÜLLER SECOND HAND SIZING RANGE with HEAD STOCK WORKING WIDTH 3200 MM DESIGNED for WARP BEAM FLANGES Ø 1100 MM with 2 SIZE BOXES-6 TEFLONISED- and 6 DRYING CYLINDERS-SIZE KITCHEN-YEAR of CONSTRUCTION 2000
0.00
EURO
ex mill floor
2010-08-09
UM 34.108.11422
1 ALEA SECOND HAND DRYING MACHINE DESIGNED as MULTI LAYER DRYER -WORKING WIDTH 2200 MM-TWO SECTIONS on TWO LAYERS, TOTAL 4 DRYING CHAMBERS STEAM HEATED-BIG BATCH WINDER-YEAR of CONSTRUCTION 1994
0.00
EURO
ex mill floor
2010-08-09
UM 27.60.11423
4 DORNIER SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL HTV S8/S24 -NOMINAL WIDTH 1800 MM-4 COLOUR SELECTOR-STÄUBLI ELECTRONIC DOBBY MODEL 2670 with 24 SHAFTS-YEAR of CONSTRUCTION 1999
0.00
- not spec -
2010-08-09
UM 27.62.11424
4 DORNIER SECOND HAND WEAVING MACHINES DESIGNED as AIR JET WEAVING AUTOMATES MODEL AWS 8 / S-NOMINAL WIDTH 1900 MM-8 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2871 with 10 SHAFTS-YEAR of CONSTRUCTION 2005/2007
0.00
- not spec -
2010-08-09
UM 27.62.11315
10 PICANOL SECOND HAND WEAVING MACHINES DESIGNED as AIR JET LOOMS MODEL OMNI 2 P 190 -WORKING WIDTH 1900 MM-2 COLOURS with STÄUBLI CAM MOTION MODEL 1600-YEAR of CONSTRUCTION 1997
0.00
EURO
C&F
2010-08-06
UM 46.226.11328
1 LÄSSER SECOND HAND EMBROIDERY MACHINE DESIGNED as SHUTLES EMBROIDERY MACHINE MODEL L 120 LCS TWIN 20 M - TWO LAYERS - STITCHING HEIGHT 1200 MM - YEAR of CONSTRUCTION 1999
0.00
EURO
C&F
2010-08-06
UM 27.60.11337
1 VAMATEX SECOND HAND WEAVING MACHINE DESIGNED as RAPIER LOOM for COTTON TERRY JACQUARD WEAVE MODEL SP1151 ES-WORKING WIDTH 3600 MM-8 COLOURS with STÄUBLI ELECTRONIC JACQUARD MODEL CX 860 for 2'688 HOOKS-CONTROLLER JC 4-YEAR of CONSTRUCTION 1995
0.00
EURO
ex mill floor
2010-08-06
UM 27.62.11420
4 TOYOTA SECOND HAND WEAVING MACHINES DESIGNED as AIR JET LOOMS for COTTON TERRY WEAVE MODEL JAT 610-WORKING WIDTH 1900 MM- 4 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2670 RS-YEAR of CONSTRUCTION 1998
0.00
- not spec -
2010-08-06
UM 27.60.11417
6 DORNIER SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL HTVS 4/S-NOMINAL WIDTH 2000 MM-4 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2667 with 14 SHAFTS-YEAR of CONSTRUCTION 1993
0.00
- not spec -
2010-08-05
UM 24.46.11419
1 SSM SECOND HAND WINDING MACHINE DESIGNED as PRECISION WINDER for LL YARNS MODEL DIGICONE PRECIFLEX DP 3 with 40 WINDING POSITIONS - CONICAL or CYLINDRICAL FEEDING-WINDING LENGTH 100 - 254 MM-YEAR of CONSTRUCTION 2003
0.00
C&F
2010-08-05
UM 34.108.9743
1 MONFORTS second hand DRYING MACHINE DESIGNED for WOVEN FABRICS model DYNAIR -S -WORKING WIDTH 1800 MM - 3 CHAMBERS DIRECT GAS HEATED - 2 STEAMING UNITS - COOLING DEVICE - INVERTERS - MADE in 1995 YEAR
0.00
EURO
ex mill floor
2010-08-04
UM 27.60.11414
6 VAMATEX SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL P 9000 PLUS-WORKING WIDTH 2100 MM-8 COLOURS with FIMTESSILE ELECTRONIC DOBBY MODEL RD 820-YEAR of CONSTRUCTION 1996
0.00
C&F
2010-08-04
UM 41.208.11415
1 FRIGERIO SECOND HAND WINDER DESIGNED as ROLLING- and UNROLLING MACHINE for A-FRAMES MODEL JUMBO - WORKING WIDTH 2400 MM with DOUBLE ROLLING- UNROLLING ARM and FABRIC CONVEYOR BELT-YEAR of CONSTRUCTION 1989 approx.
0.00
- not spec -
2010-08-04
UM 26.58.11401
1 BENNINGER SECOND HAND COMPLETE WARPING MACHINE DESIGNED as SECTIONAL WARPER MODEL BEN-MATIC - WORKING WIDTH 2200 MM with EQUALISING ROLLER and WAXING with CREEL type GS / UB DESIGNED for 642 YARNS - YEAR of CONSTRUCTION 1996
0.00
EURO
ex mill floor
2010-08-03
UM 28.124.11402
1 STÄUBLI SECOND HAND DRAWING-IN MACHINE MODEL DELTA 100 DESIGNED for 28 HEALD FRAMES MAX - PC CONTROLLED with 2 TROLLEYS and SOME SPARE PARTS-YEAR of CONSTRUCTION 1986
0.00
EURO
ex mill floor
2010-08-03
UM 35.88.11411
3 ATYC SECOND HAND DYE APPARATUSES DESIGNED as HIGH TEMPERATURE DYE MACHINES MODEL SD 200 - CAPACITY 200 KG - TWO ROPES with JUCKERS FULLY ATUMATIC PROGRAMMER INSTALLED in 2000 YEAR-YEAR of CONSTRUCTION 1984/1986
0.00
- not spec -
2010-08-03
UM 27.62.11413
12 PICANOL SECOND HAND DIFFERENT WEAVING MACHINES DESIGNED as AIR JET LOOMS for JACQUARD WEAVING MODELS OMNI 4 R/J 190-WORKING WIDTH 1900 MM-4 COLOURS with STÄUBLI ELECTRONIC DOBBY 2560 with 16 LEVERS/GROSSE ELECTRONIC JACQUARD for 1'344 HOOKS-YEAR 1998
0.00
- not spec -
2010-08-03
UM 35.90.11407
1 MCS SECOND HAND COMPLETE DYE APPARATUS DESIGNED as SOFT FLOW DYEING AUTOMATE for KNITTED GOODS and MICRO FIBERS MODEL SF 100 TYPE 2S/54 HT with 2 ROPES-CAPACITY 260 KG-BIG DIA INTERNAL REEL TO AVOID GRIMPS-YEAR of CONSTRUCTION 1996
0.00
EURO
ex mill floor
2010-08-02
UM 35.90.11408
1 MCS SECOND HAND COMPLETE DYE APPARATUS DESIGNED as SOFT FLOW DYEING AUTOMATE for KNITTED GOODS and MICRO FIBERS MODEL SF 100 TYPE 3S/36 HT with 3 ROPES-CAPACITY 300 KG-BIG DIA INTERNAL REEL TO AVOID GRIMPS-YEAR of CONSTRUCTION 1997
0.00
EURO
ex mill floor
2010-08-02
UM 22.197.11409
1 SANT'ANDREA SECOND HAND COMPLETE SPINNING PREPARATION LINE DESIGNED as INTERSEXTING LINE for LONG STAPLE FIBER SPINNING CONSISTING of FIRST PASSAGE MODEL CSN-SECOND PASSAGE with MECHANICAL AUTOLEVELER and THIRD PASSAGE-YEAR of CONSTRUCTION 1987
0.00
ex mill floor
2010-08-02
UM 22.197.11410
1 COGNETEX SECOND HAND COMPLETE SPINNING PREPARATION LINE DESIGNED for LONG STAPLE FIBER SPINNING COMPOSED by FIRST PASSAGE model RVC with AUTOLEVELLER-SECOND PASSAGE model RVC and THIRD PASSAGE model RVC-YEAR of CONSTRUCTION 1981
0.00
- not spec -
2010-08-02
UM 35.85.11210
1 MONFORTS SECOND HAND SANFORISING MACHINE MODEL TOPTEX-WORKING WIDTH 2200 MM with STEAMER at ENTRY-COMPRESSIVE SHRINKING-COOLING CYLINDER and CONVEYOR BELT-YEAR of CONSTRUCTION 1992
0.00
EURO
ex mill floor
2010-07-30
UM 41.223.11231
1 TESTA SECOND HAND ROLLING- and INSPECTING MACHINE - WORKING WIDTH 1800 MM with ENTRY FRAME with NON STOP J-BOX - MODERNISED with INVERTERS YEAR 2003
0.00
- not spec -
2010-07-30
UM 27.60.11342
6 VAMATEX SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL LEONARDO-WORKING WIDTH 2100 MM-8 COLOUR with STÄUBLI ELECTRONIC DOBBY MODEL 2670 for 20 LEVERS-YEAR of CONSTRUCTION 2001
0.00
EURO
ex mill floor
2010-07-30
UM 41.334.11406
1 LOT of DIFFERENT SECOND HAND LABORATORY EQUIPMENT for WOVENS and KNITTED GOODS of COMEL STEAM PRESS-HAMES LAB WASHING TESTER-TEPA LAB PADDER-DYEING TESTER and OTHERS-YEAR of CONSTRUCTION 1998 - 2003
0.00
- not spec -
2010-07-30
UM 27.61.11072
48 SULZER SULTEX SECOND HAND COMPLETE WEAVING AUTOMATES DESIGNED as PROJECTILE LOOMS for COTTON WEAVE MODEL P7300 B330 N4 EP 10 R D12-WORKING WIDTH 3300 MM-SPLIT BEAM ARRANGEMENT-4 COLOURS with CAM MOTION MODEL E 10-10 SHAFTS-YEAR of CONSTRUCTION 2004
0.00
EURO
ex mill floor
2010-07-29
UM 34.99.11404
1 BABCOCK SECOND HAND COMPLETE SINGLE LAYER STENTER DESIGNED for WOVENS-WORKING WIDTH 1800 MM with FINISHING FOULARD-MAHLAO AUTOMATIC WEFT STRAIGHTNER-HORIZONTAL PIN CHAIN-7 CHAMBERS DIRECT GAS EHATED-YEAR of CONSTRUCTION 1996
0.00
- not spec -
2010-07-29
UM 34.311.11405
1 ANGLADA SECOND HAND TUMBLER MODEL TURBANG TDR-WORKING WIDTH 2000 MM with ONE CHAMBER DIRECT GAS HEATED with FOLDER nad BATCHER DESIGNED for A-FRAMES-YEAR of CONSTRUCTION 2000
0.00
- not spec -
2010-07-29
UM 27.60.11403
4 SULZER RÜTI SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS for COTTON TERRY WEAVE MODEL G6100 B260 N4 SP-WORKING WIDTH 2600 MM-4 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2660 with 16 LEVERS-YEAR of CONSTRUCTION 1989
0.00
- not spec -
2010-07-28
UM 27.60.11283
12 PICANOL SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL GTX 4 R 190 - WORKING WIDTH 1900 MM - 4 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2660 for 20 LEVERS - YEAR of CONSTRUCTION 1996
0.00
EURO
C&F
2010-07-27
UM 27.62.11382
11 SULZER RÜTI SECOND HAND WEAVING MACHINES DESIGNED as AIR JET LOOMS for COTTON WEAVE MODEL L 5100 B220 N1-1 EP-WORKING WIDTH 2200 MM-2 COLOURS-WEFT MIXER with CAM MOTION for 16 LEVERS, 6 INSTALLED-YEAR of CONSTRUCTION 1989
0.00
EURO
ex mill floor
2010-07-27
UM 27.60.11397
10 SULZER SMIT SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS for COTTON and FILAMENTS WEAVE MODEL G6300 340 N8 SP-WORKING WIDTH 3400 MM-FULL WIDTH BEAM ARRANGEMENT-8 COLOURS with STÄUBLI ELECTRONIC DOBBY DESIGNED for 20 LEVERS-YEAR 2001
0.00
EURO
ex mill floor
2010-07-27
UM 28.68.11400
1 GENKINGER SECOND HAND TROLLEY MODEL EE-KHUR 15/8 GEV - USEFUL WIDTH 4600 MM DESIGNED for WARP BEAMS, HEALD FRAMES and REED - YEAR of CONSTRUCTION 1998
0.00
- not spec -
2010-07-27
UM 27.60.11381
8 SULZER RÜTI SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL F 2001 4N 210 R- WORKING WIDTH 2100 MM-4 COLOURS with CAM MOTION designed for 12 SHAFTS-INSTALLED 4-YEAR of CONSTRUCTION 1980
0.00
- not spec -
2010-07-26
UM 27.62.11383
5 PICANOL SECOND HAND DIFFERENT WEAVONG MACHINES DESIGNED as AIR JET LOOMS MODELS OMNI 2 P 250 & OMNI 2 P 220-WORKING WIDTH 2500/2200 MM-2 COLOURS with STÄUBLI CAM MOTION MODELS 1600-6 shafts & 1751 A with 4 SHAFTS-YEAR of CONSTRUCTION 1995/96 & 2000
0.00
- not spec -
2010-07-26
UM 34.122.11396
1 ARIOLI SECOND HAND STEAMING MACHINE - WORKING WIDTH 3200 MM - DESIGNED for SATURED STEAM and HIGH TEMPERATURE STEAM - HEATED by DIATHERMIC OIL - YEAR of CONSTRUCTION 1995
0.00
EURO
FOT
2010-07-23
UM 27.60.11398
2 NUOVO PIGNONE SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL FAST - WORKING WIDTH 3400 MM - SINGLE BEAM EXECUTION-8 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2670 DESIGNED for 20 LEVERS-YEAR of CONSTRUCTION 1997
0.00
- not spec -
2010-07-23
UM 26.58.11399
2 BENNINGER SECOND HAND DIFFERENT WARPING PLANTS DESIGNED as SECTIONAL WARPERS MODEL SZPERTRONIC and BENTRONIC-WORKING WIDTH 3400 MM; DESIGNED for WARP BEAMS FLANGES Ø 1000 MM with CREEL 640 YARNS and 576 YARNS-YEAR of CONSTRUCTION 1992 and 1999
0.00
- not spec -
2010-07-23
UM 27.60.11391
7 VAMATEX SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL P1001 ES-FULL MOT-WORKING WIDTH 1900 MM-8 COLOURS with FIMTESSILE ELECTRONIC DOBBY MODEL RD 840 with 16 SHAFTS-YEAR of CONSTRUCTION 1996
0.00
EURO
C&F
2010-07-22
UM 27.60.11392
5 VAMATEX SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL P 1001-WORKING WIDTH 2100 MM-8 COLOURS with FIMTESSILE DOBBY MODEL RD 800 with 20 SHAFTS-YEAR of CONSTRUCTION 1990
0.00
EURO
C&F
2010-07-22
UM 34.106.11393
1 TORRES SECOND HAND FINISHING LINE DESIGNED as SHEARING MACHINE MODEL TAR-200-WORKING WIDTH 3400 MM with PRE-CUTTING DEVICE and EMBROIDERY PATTERN-YEAR of CONSTRUCTION 2001
0.00
- not spec -
2010-07-22
UM 34.103.11394
1 RAMISCH SECOND HAND CALENDERING MACHINE DESIGNED as 3-BWOL CALANDER-WORKING WIDTH 2000 MM with UPPER BOWL HEATED Ø 320 MM, MIDDLE BOWL in PAPER Ø 480 MM and BOTTOM BOWL Ø 320 MM-OIL HEATED by DIRECT PROPAN GAS-YEAR of CONSTRUCTION 1990 approx.
0.00
- not spec -
2010-07-22
UM 28.124.11395
1 VEGA SECOND HAND DRWAING MACHINE DESIGNED for HEDDLES, DROPPERS and REED for 20 HEALD FRAMES of 3400 MM with WASHING UNIT for WIRES and DROPPERS-YEAR of CONSTRUCTION 1996
0.00
- not spec -
2010-07-22
UM 34.106.11219
1 MARIO CROSTA SECOND HAND SHEARING MACHINE MODEL SPT/6 - WORKING WIDTH 2200 MM with 6 RESERVE BRUSHES and 1 CYLINDER with NYLON ABRASIVE and 1 CYLINER with BLADES-YEAR of CONSTRUCTION 2004
0.00
EURO
ex mill floor
2010-07-21
UM 35.166.11289
1 MEZERRA SECOND HAND DYE JIGGER DESIGNED as MINI JIGGER MODEL VGC - WORKING WIDTH 1800 MM-WINDING Ø 300 MM-CAPACITY 150 METER-STEAM HEATED with RECYCLING and WASHING-YEAR of CONSTRUCTION 1995 approx. COMPLETE OVERHAULED
0.00
EURO
FOT
2010-07-21
UM 27.60.11361
1 DORNIER SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOM for JACQUARD WEAVE of UPHOLSTERY and CURTAINS MODEL HTV S8/J-NOMINAL WIDTH 1800 MM-8 COLOURS with STÄUBLI ELECTRONIC JACQUARD MODEL CX 860 with 2'640 HOOKS-YEAR of CONSTRUCTION 1996
0.00
EURO
ex mill floor
2010-07-21
UM 23.40.11389
1 ZINSER SECOND HAND SPINNING MACHINE DESIGNED as RING SPINNING FRAME MODEL 350 with 1'008 SPINDLES-GAUGE 70 MM-RING Ø 38 MM with AUTODOFFER and COWEMAT-YEAR of CONSTRUCTION 1998
0.00
FOT
2010-07-21
UM 34.108.11390
1 SALVADE SECOND HAND DRYING MACHINE DESIGNED as DESIGNED as TENSIONLESS DRYER for TUBULAR and OPEN WIDTH WOVENS and KNITTED GOODS MODEL AVA - WORKING WIDTH 2600 MM with 3 SECTIONS and 2 PASSAGES - YEAR of CONSTRUCTION 1995
0.00
- not spec -
2010-07-21
UM 27.60.11112
4 DORNIER SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL HTV 8 /SD-NOMINAL WIDTH 1900 MM-8 COLOURS-STÄUBLI ELECTRONIC DOBBY MODEL 2600 with 20 SHAFTS-YEAR of CONSTRUCTION 1988
0.00
EURO
ex mill floor
2010-07-20
UM 34.99.11388
1 BABCOCK SECOND HAND SINGLE LAYER STENTER DESIGNED for WOVENS and KNITTED GOODS MODEL ECO AIR-WORKING WIDTH 3600 MM with BETA FINISHING FOULARD-MAHLO WEFT STRAIGTHNER-HORIZONTAL PIN CHAIN-8 CHAMBERS DIRECT GAS HEATED-BATCHER-YEAR of CONSTRUCTION 2000
0.00
- not spec -
2010-07-20
UM 34.137.11386
1 JAMES BAILEY SECOND HAND COMPLETE FINISHING RANGE DESIGNED as COATING- and DRYING PLANT-WORKING WIDTH 2500 MM with IMPREGNATION FOULARD with SINGLE ROLLER COATING-GAS HEATED REAX DRYER with 2 BURNERS DESIGNED for FABRIC BOTH SIDE DRYING-YEAR 1996
0.00
- not spec -
2010-07-19
UM 36.95.11387
1 REGGIANI SECOND HAND PRINTING PLANT DESIGNED as ROTARY PRINTING MACHINE MODEL UNICA 240/23 - 320-WORKING WIDTH 3200 MM, DESIGNED for 15 COLOURS with GLUING MOTION-DRYING DEPARTMENT with 6 COMPARTMENTS THERMAL OIL HEATED-YEAR of CONSTRUCTION 2001
0.00
- not spec -
2010-07-19
UM 34.98.11225
1 BABCOCK SECOND HAND SINGLE LAYER STENTER DESIGNED for WOVEN FABRICS-WORKING WIDTH 2200 MM with MAHLO WEFT STRAIGHTNER-BETA FOULARD-HORIZONTAL PIN CHAIN-8 CHAMBERS THERMAL OIL HEATED-BATCHING and PACKING-YEAR of CONSTRUCTION 2000
0.00
EURO
ex mill floor
2010-07-15
UM 22.34.11234
12 CROSROL SECOND HAND CARDING MACHINES MODEL MK 4 with CHUTE FEED by CROSROL with AUTOLEVELLER - CAN SIZE 600 x 1000 MM - YEAR of CONSTRUCTION 1992
0.00
EURO
C&F
2010-07-15
UM 46.226.11362
2 SAURER SECOND HAND EMBROIDERY MACHINES DESIGNED as SHUTLLES EMBROIDERY FRAMES MODEL S 4040 HP - STITCHING HEIGHT 110 MM with SAURER TOP SHUTTLES METAL - YEAR of CONSTRUCTION 1997
0.00
C&F
2010-07-15
UM 22.39.11380
2 SANT'ANDREA SECOND HAND DIFFERENT INERSECTING LINES MODELS HC 22 & HC 22 ARE with COMBING HEAD with CAHIN-12/16 COUPLINGS-CAN SIZE 800 x 1200 MM-AUTOMATIC DOFFING-YEAR of CONSTRUCTION 2001
0.00
- not spec -
2010-07-15
UM 38.116.11384
1 JASPER & THIES SECOND HAND COMPLETE DYE LINE DESIGNED for YARN DEYING COMPOSED with DIFFERENT YARN DYE APPARATUSES, SAMPLE DYE MACHINES and HYDROEXTRACTOR for YARNS and DRYING RANGE with 2 STEAM HEATED CHAMBERS-YEAR of CONSTRUCTION 1997/1999
0.00
- not spec -
2010-07-15
UM 26.58.11378
1 KARL MAYER SECOND HAND WARPING RANGE DESIGNED as SAMPLE WARPER MODEL ROM-2 MKS-003-WORKING WIDTH 2200 MM-8 COLOURS-6 COLOURS INSTALLED-WARP LENGTH 10000 MM max. YEAR of CONSTRUCTION 1995
0.00
- not spec -
2010-07-14
UM 27.309.11379
1 JACOB MÜLLER SECOND HAND WEAVING MACHINE DESIGNED as HIGH SPEED LOOM for NARROW FABRIC WEAVE MODEL NCE 1/365 with MÜDATA 4-ONE WEAVING HEAD-WORKING WIDTH 340 MM-SHEEDING DEVICE with CAM MOTION MODEL Q 12 with 4 SHAFTS-YEAR of CONSTRUCTION 2004
0.00
EURO
ex mill floor
2010-07-14
UM 27.61.11068
11 SULZER RÜTI SECOND HAND DIFFERENT WEAVING MACHINES DESIGNED as PROJECTILE LOOMS for COTTON WEAVE MODEL P7200B360/390 N2 EP-WORKING WIDTH 3600/3900 MM-SPLIT BEAM ARRANGEMENT-2 COLOURS with CAM MOTION-CARBON PROJECTILES-YEAR of CONSTRUCTION 1995
0.00
C&F
2010-07-13
UM 27.61.11069
10 SULZER RÜTI SECOND HAND DIFFERENT WEAVING MACHINES DESIGNED as PROJECTILE LOOMS for COTTON WEAVE MODELS TW 11 & PU 153-WORKING WIDTH 3900 MM-SPLIT BEAM ARRANGEMENT-SINGLE COLOUR-CAM MOTION-YEAR of CONSTRUCTION 1978
0.00
C&F
2010-07-13
UM 24.47.11363
1 MURATA SECOND HAND WINDING MACHINE DESIGNED as AUTOMATIC CONE WINDER MODEL MACHCONER 7-VSS with 60 WINDING POSITIONS-AUTOMATIC FEEDING CBF-SPLICER G8Z-OVER HEAD CLEANER-YEAR of CONSTRUCTION 1996
0.00
EURO
C&F
2010-07-13
UM 27.60.11373
12 PICANOL SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL GAMMA 4 R 190-WORKING WIDTH 1900 MM-4 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2670 with 16 SHAFTS-YEAR of CONSTRUCTION 1997
0.00
EURO
ex mill floor
2010-07-13
UM 27.60.11377
4 PICANOL SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS for JACQUARD WEAVE MODEL GAMMA 8 J 340-WORKING WIDTH 3400 MM-TWIN BEAM ARRANGEMENT-8 COLOURS with STÄUBLI ELECTRONIC JACQUARD MODEL CX 960 with 2'400 HOOKS and CONTROLLER JC 5-YEAR 1998
0.00
- not spec -
2010-07-13
UM 27.62.11376
18 PICANOL SECOND HAND WEAVING MACHINES DESIGNED as AIR JET LOOMS MODEL OMNI 2 P 190 - WORKING WIDTH 1900 MM - 2 COLOURS with CAM MOTION - YEAR of CONSTRUCTION 1997/98
0.00
EURO
FOT
2010-07-12
UM 34.99.10768
1 BABCOCK SECOND HAND SINGLE LAYER STENTER DESIGNED for WOVENS-WORKING WIDTH 2800 MM with KÜSTERS FOULARD-BIANCO WEFT STRAIGHTENER-HORIZONTAL RETURN PIN CHAIN-5 CHAMBERS direct GAS HEATED-YEAR of CONSTRUCTION 1998
0.00
EURO
ex mill floor
2010-07-09
UM 35.86.10945
1 RAMISCH KLEINEWEFERS SECOND HAND COMPLETE WASHING RANGE DESIGNED as OPEN WIDTH WASHING MACHINE for KNITTED- and WOVEN FABRICS-WORKING WIDTH 1800 MM with 3 plus 3 WASHING BOXES-RELAX CHAMBER with CONVEYOR BELT-PADDERS-YEAR of CONSTRUCTION 1992
0.00
EURO
C&F
2010-07-09
UM 26.58.11082
1 KARL MAYER SECOND HAND WARPING MACHINE DESIGNED as SAMPLE WARPER MODELR ROM 2 MKS - WORKING WIDTH 2200 MM with STANDARD CREEL for 10 COLOURS and ROTARY CREEL for 8 COLOURS-YEAR of CONSTRUCTION 2002
0.00
EURO
FOT
2010-07-09
UM 41.277.11303
1 BABCOCK WANSON SECOND HAND BOILER DESIGNED as STEAM BOILER MODEL BWS - CAPACITY 7 TONS per HOUR - DESIGNED for 15 BAR max and 201 °C - HEATED by GAS BURNER - YEAR of CONSTRUCTION 2003
0.00
- not spec -
2010-07-09
UM 27.60.11374
10 PICANOL SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL GAMMA 4 R 190 with SUMO MOTROR DRIVE-WORKING WIDTH 1900 MM-4 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2670 with 20 SHAFTS-YEAR of CONSTRUCTION 2001
0.00
- not spec -
2010-07-09
UM 34.103.11375
1 RAMISCH KLEINEWEFERS SECOND HAND CALADERING RANGE DESIGNED as EMBROSSING 3-BOWL CALANDER MODEL RKK 320-WORKING WIDTH 3200 MM with BOWLS in PAPER Ø 500 MM, STEEL Ø 150 MM and PAPER Ø 500 MM plus 12 EMBROSSING CYLINDERS-YEAR of CONSTRUCTION 1990
0.00
- not spec -
2010-07-09
UM 36.350.11369
1 SWA SECOND HAND PRINITING MACHINE DESIGNED as YARN PRINTER DESIGNED for 4 COLOURS with 4 PRINTING BOWLS for PRINTS from 10 MM UNTILE SOME METERS-48 YARNS-WINDING on HANKS-YEAR of CONSTRUCTION 1986
0.00
EURO
ex mill floor
2010-07-08
UM 24.46.11370
1 FADIS SECOND HAND WINDING MACHINE DESIGNED as HANK to CONE WINDER with 20 POSITIONS-TUBES 230 MM-WAXING DEVICE-ONE MOTOR for EACH POSITION-YEAR of CONSTRUCTION 1990
0.00
EURO
ex mill floor
2010-07-08
UM 27.62.11371
9 DORNIER SECOND HAND DIFFERENT WEAVING MACHINES DESIGNED as AIR JET LOOMS MODEL LWV 4/S-NOMINAL WIDTH 3900 MM-TWIN BEAM ARRANGEMENT-4 COLOURS with STÄUBLI MECHANICAL DOBBY MODEL 2117 with 8 SHAFTS-YEAR of CONSTRUCTION 1995
0.00
EURO
ex mill floor
2010-07-08
UM 27.62.11365
65 PICANOL SECOND HAND WEAVING MACHINES DESIGNED as AIR JET LOOMS MODEL PAT 2 E T 190-WORKING WIDTH 1900 MM-2 COLOURS-EXCENTER CRANK MOTION with 4 SHAFTS-YEAR of CONSTRUCTION 1990
0.00
EURO
ex mill floor
2010-07-07
UM 27.62.11366
16 PICANOL SECOND HAND WEAVING MACHINES DESIGNED as AIR JET LOOMS MODEL PAT 2 R T190-WORKING WIDTH 1900 MM-2 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2560 with 8 SHAFTS-YEAR of CONSTRUCTION 1988
0.00
EURO
ex mill floor
2010-07-07
UM 30.142.11367
6 SHIMA SEIKI SECOND HAND DIFFERENT KNITTING MACHINES DESIGNED as FLAT BED KNITTING FRAMES MODELS SES & SFE - WIDTH 1220 - 2010 MM - YEAR of CONSTRUCTION 1998 - 2001
0.00
- not spec -
2010-07-07
UM 42.192.11368
1 SPINNBAU, AUTEFA & FEHRER SECOND HAND COMPLETE NON WOVEN LINE DESIGNED as NEEDLE FELT PLANT-WORKING WIDTH 3700 MM with TRÜTZSCHLER OPENING and BLENDING-2 SPINBAU CARDS 2500 MM-AUTEFA CROSS LAPPER-FEHRER PRE-NEEDLE & FEHRER FINISH NEEDLE LOOMS-YEAR 2002
0.00
EURO
FOT
2010-07-07
UM 27.60.11295
6 VAMATEX SECOND HAND WEAVING AUTOMATES DESIGNED as RAPIER WEAVING MACHINES MODEL SLIVER-WORKING WIDTH 2200 MM-8 COLOURS with FIMTESSILE ELECTRONIC DOBBY MODEL 7 P for 20 LEVERS-YEAR of CONSTRUCTION 2005
0.00
EURO
ex mill floor
2010-07-06
UM 34.202.11364
1 SPEROTTO RIMA SECOND HAND COMPACTOR DESIGNED for COMPRESSIVE SHRINKING of KNITTED GOODS MODEL COMPACTA CKN 240/A - WORKING WIDTH 2400 MM with CORINO MULTISYSTEM CENTERING - SPREADING UNIT and BRAND NEW FELTS-YEAR of CONSTRUCTION 2000
0.00
- not spec -
2010-07-06
UM 27.60.11296
8 VAMATEX SECOND HAND WEAVING AUTOMATES DESIGNED as RAPIER WEAVING FRAMES MODEL SLIVER - WORKING WIDTH 1900 MM - 8 COLOURS with FIMTESSILE ELECTRONIC DOBBY MODEL 7 P for 20 LEVERS - YEAR of CONSTRUCTION 2005
0.00
- not spec -
2010-07-05
UM 27.292.11298
1 VAN DE WIELE SECOND HAND WEAVING MACHINE DESIGNED as FACE-TO-FACE VELEVET LOOM MODEL VMM-22-175-WIDTH 1750 MM with BOBBYTRONIC DESIGNED for 4 FRAMES - YEAR of CONSTRUCTION 2000
0.00
- not spec -
2010-07-05
UM 27.62.11316
19 PICANOL SECOND HAND DIFFERENT WEAVING MACHINES DESIGNED as AIR JET LOOMS MODEL OMNI 2/4 R/P 190-WORKING WIDTH 1900 MM-2 COLOURS with STÄUBLI ELECTRONIC DOBBY / CAM MOTION -YEAR of CONSTRUCTION 1998
0.00
EURO
FOT
2010-07-05
UM 27.60.11131
4 DORNIER SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOMS for JACQUARD WEAVING MODEL HTV S 4/J-NOMINAL WIDTH 2100/1800 MM-4 COLOURS with STÄUBLI ELECTRONIC JACQUARD MODEL CX 880 with 2'200 HOOKS-YEAR of CONSTRUCTION 1996
0.00
EURO
C&F
2010-07-02
UM 27.62.11180
8 SULZER RÜTI SECOND HAND WEAVING MACHINES DESIGNED as AIR JET LOOMS for WOOL WEAVE MODEL L5300 W190 N4 SP-WORKING WIDTH 1900 MM-4 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2861 with 16 SHAFTS-YEAR of CONSTRUCTION 1999
0.00
- not spec -
2010-07-02
UM 27.60.11257
2 DORNIER SECOND HAND WEAVING AUTOMATES DESIGNED as RAPIER WEAVING MACHINES MODEL PTS 8/S-NOMINAL WIDTH 1900 MM-8 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2670 for 20 LEVERS - YEAR of CONSTRUCTION 2008
0.00
EURO
FOT
2010-07-02
UM 35.88.11357
1 THEN SECOND HAND DYEING MACHINE DESIGNED as HIGH TEMPERATURE AIR FLOW DYE APPARTUS MODEL AFS 450 - CAPACITY 450 KG - 150 ° C max TEMPERATURE - PROGRAMMER - YEAR of CONSTRUCTION 1997
0.00
EURO
FOT
2010-07-02
UM 27.201.11358
15 PICANOL SECOND HAND WEAVING MACHINES DESIGNED as GRIPPER LOOMS MODEL GTM-MM N 190 -WORKING WIDTH 1900 MM-SINGLE COLOUR-CAM MOTION designed for 8 FRAMES-YEAR of CONSTRUCTION 1986
0.00
EURO
C&F
2010-07-02
UM 28.188.11359
2 STÄUBLI SECOND HAND DIFFERENT JACQUARD MACHINES DESIGNED as ELECTRONIC JACQUARD HEADS MODELS LX1600 with 2'400 hooks-CONTROLLER JC 5 and DX110 with 2'400 hooks and CONTROLLER JC6-YEAR of CONSTRUCTION 2003 & 2004
0.00
- not spec -
2010-07-02
UM 27.62.11360
6 PICANOL SECOND HAND WEAVING MACHINES DESIGNED as AIR JET LOOMS MODEL OMNI PLUS 2 P 190-WORKING WIDTH 1900 MM-2 COLOURS with STÄUBLI CAM BOX MODEL 1761 A with 8 SHAFTS - YEAR of CONSTRUCTION 2001
0.00
- not spec -
2010-07-02
UM 27.62.11277
1 DORNIER SECOND HAND WEAVING MACHINE DESIGNED as AIR JET WEAVING AUTOMATE MODEL AWS 8/S-NOMINAL WIDTH 2400 MM-8 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2871 with 12 SHAFTS-YEAR of CONSTRUCTION 2006
0.00
EURO
C&F
2010-07-01
UM 27.60.11355
6 SOMET SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS for JACQUARD WEAVE MODEL SUPER EXCEL-WORKING WIDTH 3200 mm-SINGLE BEAMS-8 COLOURS with STÄUBLI ELECTRONIC JACQUARD MODEL LX 1600 for 5'120 HOOKS-YEAR of CONSTRUCTION 2000
0.00
- not spec -
2010-07-01
UM 27.62.11356
6 PICANOL SECOND HAND WEAVING MACHINES DESIGNED as AIR JET LOOMS MODEL OMNIPLUS 2 R 190-WORKING WIDTH 1900 MM-2 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2871 with 16 SHAFTS-YEAR of CONSTRUCTION 2001
0.00
- not spec -
2010-07-01
UM 27.60.11139
2 DORNIER SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS for JACQUARD WEAVE MODEL HTV-NOMINAL WIDTH 2100 MM with STÄUBLI ELECTRONIC JACQUARD MODEL CX 860 with 1'340 HOOKS and JC 4 CONTROLLER-YEAR of CONSTRUCTION 1990
0.00
EURO
ex mill floor
2010-06-30
UM 27.60.11236
15 SULZER RÜTI SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS for SYNTHETICS MODEL G6200 S220 N4 SP-WORKING WIDTH 2200 MM-4 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2660 with 16 LEVERS-YEAR of CONSTRUCTION 1996/1998
0.00
EURO
ex mill floor
2010-06-30
UM 27.62.11318
11 PICANOL SECOND HAND WEAVING MACHINES DESIGNED as AIR JET LOOMS OMNI 4 P 190 - WORKING WIDTH 1900 MM - 4 COLOURS with STÄUBLI CAM MOTION 1620 B with 6 SHAFTS-YEAR of CONSTRUCTION 1998 and 1999
0.00
EURO
C&F
2010-06-30
UM 27.60.11353
3 VAMATEX SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL LEONARDO - WORKING WIDTH 2100 MM- 8 COLOURS with STÄUBLI ELECTRONIC DOBBY for 20 LEVERS-YEAR of CONSTRUCTION 2000
0.00
EURO
ex mill floor
2010-06-30
UM 34.98.11305
1 SABEN SECOND HAND SINGLE LAYER STENTER DESIGNED for WOVENS and KNITTED GOODS-WORKING WIDTH 2200 MM with BIANCO FINISHING FOULARD-BIANCO WEFT STRAIGHTENER-VERTICAL RETURN PIN CHAIN-5 CHAMBERS THERMAL OIL HEATED with BOILER-YEAR of CONSTRUCTION 2003
0.00
EURO
ex mill floor
2010-06-29
UM 27.62.11352
1 DORNIER SECOND HAND WEAVING AUTOMATE DESIGNED as AIR JET WEAVING MACHINE for JACQUARD WEAVE MODEL AWV 8/J 330-NOMINAL WIDTH 3300 mm-SINGLE BEAM EXECUTION-8 COLOURS with BONAS ELECTRONIC JACQUARD for 3'072 HOOKS-YEAR of CONSTRUCTION 2002
0.00
- not spec -
2010-06-29
UM 27.60.11346
10 DORNIER SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL HTV S4 / S-NOMINAL WIDTH 2300 MM-4 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2670 with 18 SHAFTS-YEAR of CONSTRUCTION 1998
0.00
ex mill floor
2010-06-28
UM 35.156.11347
1 BRONGO SECOND HAND DYE APPARATUS DESIGNED for GARMENTS with a CAPACITY 200 KG with SEPARATE MIXING and DYE CHEMICALS TANK-FULLY in STAINLESS STEEL-YEAR of CONSTRCTION 2004
0.00
EURO
FOT
2010-06-28
UM 35.156.11348
1 DE ROSA SECOND HAND DYEING APPARATUS DESIGNED for GARMENTS DYEING with a CAPACITY of 300 KG with THREE SEPARATE SECTORS-WASHING MOTOR-INVERTER MOTOR DRIVE-MODERNISED and UPDATED COMPUTER-YEAR of CONSTRUCTION 1994
0.00
EURO
FOT
2010-06-28
UM 27.62.11292
28 TSUDAKOMA SECOND HAND DIFFERENT WEAVING MACHINES DESIGNED as AIR JET LOOMS MODELS ZA 205i; ZA 209i and ZAX-WORKING WIDTH 1900 MM-2 COLOURS with STÄUBLI ELECTRONIC DOBBY 2560/STÄUBLI CAM MOTION 1600-YEAR of CONSTRUCTION 1990-1999
0.00
EURO
C&F
2010-06-25
UM 27.62.11345
5 PICANOL SECOND HAND WEAVING MACHINES DESIGNED as AIR JET LOOMS MODEL OMNI 2 P 320-WORKING WIDTH 3200 MM-SINGLE BEAM EXECUTION-2 COLOURS with STÄUBLI CAM BOX MODEL 1600 with 4 SHAFTS-YEAR of CONSTRUCTION 1999
0.00
EURO
FOT
2010-06-25
UM 24.46.11009
4 SAVIO SECOND HAND DIFEFRENT WINDING MACHINES DESIGNED as AUTOMATIC CONE to CONE WINDERS MODELS ORION RL & ESPERO RL each with 56 WINDING POSITIONS-AUTOMATIC FEEDING-STAINLESS STEEL DRUMS-LOEPFE CLEARERS-ACQUASPLICER MESDAM-YEAR of CONSTRUCTION 1999-2005
0.00
EURO
C&F
2010-06-24
UM 36.95.11335
1 REGGIANI SECOND HAND COMPLETE TEXTILE PRINTING RANGE DESIGNED as ROTATION PRINTING MACHINE MODEL RENOIR -WORKING WIDTH 3200 MM-8 COLOURS-RAPPORT 1200 MM with 5 DRYING PASSAGES on 6 SECTIONS DIRECT GAS HEATED-YEAR of CONSTRUCTION 2000
0.00
- not spec -
2010-06-24
UM 34.99.11336
1 BABCOCK SECOND HAND SINGLE LAYER STENTER DESIGNED for WOVENS-WORKING WIDTH 3800 MM with BETA FINISHING FOULARD-BIANCO AUTOMATIC WEFT STRAIGHTENER-COMBI CHAIN-6 CHAMBERS DIRECT GAS HEATED-WINDER-YEAR of CONSTRUCTION 1994
0.00
- not spec -
2010-06-24
UM 41.223.11338
1 TESTA SECOND HAND INSPECTING- ROLLING- and PACKING MACHINE MODEL 111 BT 60 EK 5P-WORKING WIDTH 2000 MM-UNWINDING from BIG BATCHER-AUTOMATIC ROLL CHANGE with CUTTER-AUTOMATIC ROLL PACKING and LABELING-YEAR of CONSTRUCTION 1999
0.00
EURO
ex mill floor
2010-06-24
UM 27.60.11339
39 SULZER RÜTI SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL G6100 190 N2/4 SP-WORKING WIDTH 1900 MM-2/4 COLOURS with STÄUBLI MECHANICAL DOBBY MODEL 2031 with 14 SHAFTS-YEAR of CONSTRUCTION 1994/95
0.00
- not spec -
2010-06-24
UM 27.60.11340
6 VAMATEX SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL LEONARDO-WORKING WIDTH 2100 MM-8 COLOURS with FIMTESSILE ELECTRONIC DOBBY for 20 LEVERS-YEAR of CONSTRUCTION 1997-2001
0.00
EURO
ex mill floor
2010-06-24
UM 22.34.10984
5 RIETER SECOND HAND CARDING MACHINES MODEL C50 with AUTOMATIC CAN CHANGE - AUTOLEVELLER - CHUTE FEED by RIETER model A7/V - YEAR of CONSTRUCTION 1995
0.00
EURO
C&F
2010-06-23
UM 27.60.11250
12 VAMATEX SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL LEONARDO-WORKING WIDTH 1900 MM-8 COLOUR SELECTOR with FIMTESSILE ELECTRONIC DOBBY MODEL RD 840 with 20 SHAFTS-YEAR of CONSTRUCTION 1998
0.00
EURO
C&F
2010-06-23
UM 23.40.11334
10 ZINSER SECOND HAND SPINNING MACHINES DESIGNED as LINKED RING SPINNING FRAMES MODEL HS 330 each with 768 SPINDLES-GAUGE 75 MM-RING Ø 42 MM with COWEMAT LASER with SCHLAFHORST AUTOCONER 238 LINKED-YEAR of CONSTRUCTION 1989/1990 - 1994
0.00
EURO
C&F
2010-06-23
UM 30.142.11329
2 UNIVERSAL SECOND HAND KNITTING MACHINES DESIGNED as FLAT BED KNITTING MACHINES MODEL MC 848 - WORKING WIDTH 1800 MM - FINESS E 7 and E 12-12 FEEDERS MEMMINGER SFE 1041 IRO- 2 FRAMES - YEAR of CONSTRUCTION 1999 and 1996
0.00
EURO
ex mill floor
2010-06-21
UM 41.277.11330
1 INPLAN SECOND HAND but NEVER USED BOILER DESIGNED as HORIZONTAL THERMOFLUID OIL BOILER MODEL H 3000 with WEISHAUPT HEAVY OIL BURNER of 3'488 kW and 300 °C with EXPANSION TANK and CIRCULATION PUMP-YEAR of CONSTRUCTION 2010
0.00
EURO
ex work
2010-06-21
UM 24.333.11005
2 G + W SECOND HAND WINDING LINES DESIGNED as BALLING FRAMES MODEL 206 each with 20 BALLING SPINDLES for 50 - 100 g BALLS-AUTOMATIC DOFFING-AUTOMATIC LABELING-PRINTER with CROON 6 LUCKE ACCUMULATOR of 20 POSITIONS-YEAR of CONSTRUCTION 1984/85
0.00
EURO
ex mill floor
2010-06-18
UM 24.46.11326
1 ELITEX KARL MAYER SECOND HAND WINDING MACHINE DESIGNED as AUTOMATIC WINDER MODEL C-10/16 SPINDLES-8 POSITIONS with Y MAGAZIN and 8 POSITION with FEEDROLLER for WINDING from HANK to CONE-ELECTRONIC CLEARER-YARNMASTER TK 680-YEAR of CONSTRUCTION 2001
0.00
EURO
C&F
2010-06-18
UM 23.40.11327
2 NSC SCHLUMBERGER SECOND HAND SPINNING MACHINES DESIGNED as RING SPINNING FRAMES MODEL CF 53 EACH with 180 SPINDLES-SPINDLE GAUGE 120 MM-RING Ø 90 MM-TUBES 400 MM-SINGLE SIDED-YEAR of CONSTRUCTION 2001
0.00
EURO
C&F
2010-06-18
UM 34.98.11313
1 BRÜCKNER SECOND HAND SINGLE LAYER STENTER DESIGNED for WOVENS and KNITTED FABRICS-WORKING WIDTH 2600 MM with FINISHING FOULARD-MAHLO WEFT STRAIGHTENER-VERTICAL PIN CHAIN-8 CHAMBERS THERMAL OIL HEATED-BATCHER-YEAR of CONSTRUCTION 2000
0.00
EURO
C&F
2010-06-17
UM 36.234.10770
1 KLIEVERIK SECOND HAND PRINTING PLANT DESIGNED as TRANSFER PRINTING CALANDER for LAMINATING, TRANSFER- and FILM PRINTING MODEL TC 131-2750-WORKING WIDTH 2500 MM with ELECTRICAL HEATING SYSTEM-YEAR of CONSTRUCTION 1998
0.00
EURO
ex mill floor
2010-06-16
UM 27.60.11264
47 SAURER SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL S-400-WORKING WIDTH 1850 MM-4 COLOUR SELECTOR with STÄUBLI MECHANICAL DOBBY MODEL 2232 with 8 LEVERS-YEAR of CONSTRUCTION 1984/1985
0.00
EURO
C&F
2010-06-16
UM 35.86.11323
4 MAJEN plus 1 TUPESA second hand WASHING MACHINES DESIGNED as ONE COMPLETE PIECE WASHING LINE with DRYER of 480 KG CAPACITY TOTAL ALL MADE IN STAINLESS STEEL-PROGRAMMERS for AUTOMATIC WORKING-YEAR of CONSTRUCTION 1998/2008
0.00
EURO
ex mill floor
2010-06-16
UM 24.46.11324
3 RITE SECOND HAND WINDING MACHINES EACH with 21 WINDING POSITIONS-MANUEL DOFFING-TUBE 23 MM-YEAR of CONSTRUCTION 1985
0.00
EURO
ex mill floor
2010-06-16
UM 34.137.11319
1 FAMATEX CAMPEN SECOND HAND COATING RANGE-WORKING WIDTH 5500 MM with 2 WASHING BOXES with VACCUM EXHAUST-AIR SQUEEZING COATER-HORIZONTAL PIN CHAIN for the 10 STENTERING CHAMBER STEAM HEATED-YEAR of CONSTRUCTION 1989 approx.
0.00
EURO
ex mill floor
2010-06-15
UM 24.46.11321
1 ZERBO SECOND HAND WINDING MACHINE DESIGNED as CONE TO HANK WINDER MODEL GX 50 with ELECTRONIC METER COUNT with SIDE CREEL-MESDAN SPLICER KNOTTING on EACH SIDE-YEAR of CONSTRUCTION 1992
0.00
- not spec -
2010-06-15
UM 27.60.11248
14 PICANOL SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS for JACQUARD MODEL GAMMA 8 J 340-WORKING WIDTH 3400 MM-SPLIT BEAM ARRANGEMENT-8 COLOURS with STÄUBLI ELECTRONIC JACQUARD MODEL CX 870 for 2'688 HOOKS-YEAR of CONSTRUCTION 1998
0.00
EURO
ex mill floor
2010-06-11
UM 34.244.11317
1 MARIO CROSTA SECOND HAND PRESSING MACHINE DESIGNED as ROTARY PRESS for CALENDARING MODEL C.S.B. - WORKING WIDTH 1800 MM with STEAMING UNIT-CALENDARING BOWL and LOWER BED with STEAM HEATING-YEAR of CONSTRUCTION 1995
0.00
EURO
C&F
2010-06-11
UM 27.60.11284
19 DORNIER SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL HTV S4/SD-NOMINAL WIDTH 1900 MM-4 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2667 with 20 LEVERS-YEAR of CONSTRUCTION 1989/1990
0.00
EURO
C&F
2010-06-10
UM 34.99.11314
1 BABCOCK SECOND HAND SINGLE LAYER STENTER DESIGNED for WOVENS -WORKING WIDTH 1800 MM with FINISHING FOULARD-WEFT STRAIGHTNER-HORIZONTAL RETURN PIN CHAIN-10 CHAMBERS DIRECT GAS HEATED-YEAR of CONSTRUCTION 1992
0.00
EURO
ex mill floor
2010-06-10
UM 27.60.11310
6 VAMATEX SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS for JACQUARD MODEL P 1001 - WORKING WIDTH 3400 MM - 8 COLOURS with GROSSE ELECTRONIC JACQUARD MODEL EJP 2 for 2'688 HOOKS - YEAR of CONSTRUCTION 1994 approx.
0.00
EURO
FOT
2010-06-09
UM 34.168.11311
1 GALVANIN NEW UNSOLD HYDROEXTRACTOR DESIGNED as HIGH SPEED ROTATION EXTRACTOR for YARN PACKAGES MODEL CRA/E 800-CAPACITY 40 PACKAGES by Ø 170 MM-2 ROTATION STAINLESS STEEL BASKES-AUTOMATIC WORKING CYCLE-YEAR of CONSTRUCTION 2010
0.00
EURO
ex work
2010-06-09
UM 24.46.11092
1 SSM SECOND HAND WINDING MACHINE DESIGNED as PRECISION WINDER MODEL PRECIFLEX PW 1 - F with 60 WINDING POSITIONS-TAKE UP CYLINDRICAL-MESDAN KNOTTER-WAXING DEVICE-YEAR of CONSTRUCTION 1997
0.00
EURO
FOT
2010-06-08
UM 26.58.11306
1 BENNINGER SECOND HAND WARPING AUTOMATE DESIGNED as SECTIONAL WARPER MODEL BEN-TERONIC 2600/1200 - WORKING WIDTH 2400 MM with CREEL MODEL GM-D ISOTENS with 720 ENDS on 8 LAYERS - GAUGE 240 MM-YEAR of CONSTRUCTION 2002
0.00
- not spec -
2010-06-04
UM 26.58.11307
1 BENNINGER SECOND HAND WARPING AUTOMATE DESIGNED as SECTIONAL WARPER MODEL BEN-MATIC 2600/1600 - WORKING WIDTH 2400 MM with CREEL MODEL GP-D ISOTENS with 560 YARNS on 8 LAYERS - GAUPE 240 MM - YEAR of CONSTRUCTION 2007
0.00
- not spec -
2010-06-04
UM 26.58.11308
1 BENNINGER SECOND HAND WARPING AUTOMATE DESIGNED as SECTIONAL WARPER MODEL VERSOMAT - WORKING WIDTH 2000 MM with BENNINGER CREEL MODEL GP-D with 480 POSITIONS - 8 LAYERS - GAUGE 240 MM - YEAR of CONSTRUCTION 2007
0.00
- not spec -
2010-06-04
UM 23.41.11172
3 RIETER INGOLSTADT SECOND HAND SPINNING MACHINES DESIGNED as ROTO SPINNING FRAMES MODEL RU 14 A each with 120 ROTORS-WAXING DEVICE-USTER POLYGUARD-YEAR of CONSTRUCTION 1993-1995
0.00
EURO
ex mill floor
2010-06-03
UM 24.51.11304
1 G & G FANTASIA SECOND HAND TWISTING MACHINE DESIGNED as FANCY YARN TWISTER MODEL FANTAFILO FF-ST1-1FC1 with 168 POSITIONS - ELECTRONIC HEADSTOCK FLNGES Ø 95 MM - 2 PRESSURE CYLINDERS as DRAFT DEVICE with ONE COPS MODEL BFL-YEAR of CONSTRUCTION 2006
0.00
- not spec -
2010-06-02
UM 34.99.11302
1 BRÜCKNER SECOND HAND COMPLETE SINGLE LAYER STENTER DESIGNED for WOEVNS-WORKING WIDTH 3200 MM with KÜSTERS FOULARD-MAHLO ORTHOMAT-COMBI CHAIN-7 CHAMBERS DIRECT GAS HEATED-BIG BATCHER-YEAR of CONSTRUCTION 1997
0.00
- not spec -
2010-06-01
UM 22.38.11214
1 SEYDEL SECOND HAND CONVERTOR DESIGNED as CUT CONVEYOR for FINE FILAMENT of 1,3 - 17 Dtex MODEL 911 - CAN SIZE 1000 x 1200 MM - YEAR of CONSTRUCTION 2001
0.00
- not spec -
2010-05-28
UM 27.60.11299
1 DORNIER SECOND HAND WEAVING MACHINE DESIGNED as RAPIER LOOM MODEL HTV S 12/S-NOMINAL WIDTH 1900 MM-12 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2667 DESIGNED for 20 LEVERS-YEAR of CONSTRUCTION 1997
0.00
- not spec -
2010-05-28
UM 27.62.11241
12 PICANOL SECOND HAND WEAVING MACHINES DESIGNED as AIR JET LOOMS MODEL OMNI PLUS 2 P 190 with SUMO MOTOR DRIVE-WORKING WIDTH 1900 MM-2 COLOURS with CAM MOTION STÄUBLI MODEL 1761 A with 8 SHAFTS-YEAR of CONSTRUCTION 2001
0.00
EURO
C&F
2010-05-27
UM 27.62.11297
10 PICANOL SECOND HAND WEAVING MACHINES DESIGNED as AIR JET LOOMS MODEL OMNI 2 P 190-WORKING WIDTH 1900 MM - 2 COLOURS - STÄUBLI made CAM MOTION DESIGNED for 8 LEVERS - YEAR of CONSTRUCTION 1998
0.00
EURO
C&F
2010-05-27
UM 27.61.11197
5 SULZER RÜTI SECOND HAND WEAVING MACHINES DESIGNED as PROJECTILE LOOMS for JACQUARD WEAVE MODEL PU 153 VSJ S110-WORKING WIDTH 3900 MM-SPLIT BEAM ARRANGEMENT-4 COLOURS with STÄUBLI ELECTRONIC JACQUARD CX 860-2'688 HOOKS-CONTROLLER JC 4-YEAR 1986
0.00
EURO
C&F
2010-05-25
UM 34.99.11002
1 BABCOCK SECOND HAND SINGLE LAYER STENTER-WORKING WIDTH 3200 MM with MAHLO AUTOMATIC WEFT STRAIGHTNER-BETA FINISHING FOULARD-HORIZONTAL COMBI CHAIN-7 CHAMBERS GAS HEATED-YEAR of CONSTRUCTION 1988
0.00
EURO
ex mill floor
2010-05-21
UM 35.86.11190
1 SANTEX SECOND HAND COMPLETE WASHING RANGE DESIGNED as OPEN WIDTH CONTINUOUS WASHING MACHINE for WOVEN FABRICS-WORKING WIDTH 1800 MM with IMPREGNATION and REALX CHAMBER-5 WASHING TANKS-STEAM HEATED-INMEDIATE SQUEEZING-YEAR of CONSTRUCTION 1991
0.00
- not spec -
2010-05-21
UM 27.60.11272
6 DORNIER SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL HTVS 8/S-NOMINAL WIDTH 2500 MM-8 COLOURS with STÄUBLI ELECTRONIOC DOBBY MODEL 2670 with 20 SHAFTS-YEAR of CONSTRUCTION 1999
0.00
EURO
C&F
2010-05-20
UM 22.36.11293
1 SANT'ANDREA SECOND HAND ROVING FRAME DESIGNED for YARN COUNT Nm 2 to Nm 6 MODEL RF 4A with 24 POSITIONS with TWO ENDS PER EACH SPINDLE-ELASTIC GRIPPING DRAFTING SYSTEM-CAN CREEL and 2 RUBBING ZONES-YEAR of CONSTRUCTION 2000
0.00
- not spec -
2010-05-20
UM 22.36.11294
1 SANT'ANDREA SECOND HAND RUBBING FRAME DESIGNED as VERTICAL FINISHER for STANDARD YARN COUNTS MODEL RF 2 B with 24 POSITIONS and 2 ENDS per EACH POSITION-MAXIMUM BOBBIN Ø 310 MM-BESCH DRAFTING SYSTEM-YEAR of CONSTRUCTION 1988
0.00
- not spec -
2010-05-20
UM 23.40.11017
6 SAVIO COGNETEX SECOND HAND SPINNING MACHINES DESIGNED as RING SPINNING FRAMES for WORSTED SPINNING MODEL FTC 7 L with 480 SPINDLES EACH-RING Ø 48 MM with AUTOMATIC DOFFING and DRAFT SYSTEM-YEAR of CONSTRUCTION 1991
0.00
EURO
FOT
2010-05-19
UM 22.39.11119
1 NSC SCHLUMBERGER SECOND HAND COMPLETE CHAIN GILL DESIGNED for BLENDING and DELFTING AFTER DYEING and BACKWASHING MODEL GC 15 D3 with TWO DRAFTING ZONES-WIDE HEAD-12 CAN CREEL and DUST CABINET-YEAR of CONSTRUCTION 1997
0.00
FOT
2010-05-19
UM 34.118.11288
1 SANTEX SECOND HAND BRUSHING MACHINE DESIGNED as DRY BRUSHING RANGE MODEL SANTABRUSH STB-WORKING WIDTH 1800 MM with 6 CARBIDE BRUSHES and BIG BATCH WINDER at EXIT-YEAR of CONSTRUCTION 2001
0.00
EURO
FOT
2010-05-19
UM 28.188.11290
2 STÄUBLI SECOND HAND JACQUARD HEADS DESIGNED as NAME JACQUARETTE to be INSTALL OVER THE LOOM MODEL CX 160 with 72 HOOKS EACH and ELECTRONIC PROGRAMMER - YEAR of CONSTRUCTION 1996
0.00
EURO
ex mill floor
2010-05-19
UM 22.310.11224
1 COGNETEX SECOND HAND REBREAKER MODEL SMC 410 11B with 32 END BALL CREEL - 5 ROLLER BREAKING ZONE - SINGLE BALL DOFF DELIVERY - SPRAY DEVICE - YEAR of CONSTRUCTION 1990
0.00
FOT
2010-05-18
UM 27.62.11281
10 DORNIER SECOND HAND WEAVING MACHINES DESIGNED as AIR JET LOOMS MODEL LWV 4/S - NOMINAL WIDTH 2100 MM - 4 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2580 with 12 SHAFTS-YEAR of CONSTRUCTION 1997
0.00
EURO
C&F
2010-05-18
UM 26.170.11285
1 SUCKER MÜLLER & ROSTINI SECOND HAND COMPLETE WARPING and SIZING RANGER MODEL S-423-WORKING WIDTH 2600 MM DESIGNED for WARP BEAMS FLANGES Ø 1000 MM 8 plus 4 DRYING CYLINDERS with 2 SIZE KITCHENS and FRACTIONAL WARPER with CREEL 1120 POSITIONS-YEAR 1998
0.00
EURO
FOT
2010-05-18
UM 34.311.11320
1 SANTEX SECOND HAND TUMBLER DESIGNED for WOVENS and KNITTED GOODS MODEL SANTASOFT 2K/240-WORKING WIDTH 2400 MM with 2 CHAMBERS STEAM HEATED-ENTRY- and EXIT with PLANOTEX-FOLDER-YEAR of CONSTRUCTION 1993
0.00
EURO
ex mill floor
2010-05-15
UM 31.141.11279
6 MAYER & CIE SECOND HAND KNITTING MACHINES DESIGNED as CIRCULAR KNITTERS for PLUSH MODEL MCP E - CYLINDER Ø 640 MM - GAUGE 18 with 42 SYSTEMS - YEAR of CONSTRUCTION between 1990/1992
0.00
EURO
ex mill floor
2010-05-12
UM 35.86.11280
1 MAT SECOND HAND COMPLETE MILLING MACHINE MODEL TURBOMAT with 2 CHANNELS - BONGOSSI WOODEN CYLINDERS - STAINLESS STEEL WASHING BOX - YEAR of CONSTRUCTION 1991
0.00
EURO
ex mill floor
2010-05-12
UM 26.58.10853
1 BENNINGER SECOND HAND WARPING RANGE DESIGNED as ELECTRONIC SECTIONAL WARPER for FILAMENTS as well as for NATURAL FIBERS-WORKING WIDTH 3400 MM for MAX BEAM Ø 1000 MM with CREEL of 1200 YARNS and YARN TENSIONER-YEAR of CONSTRUCTION 1992
0.00
EURO
ex mill floor
2010-05-07
UM 27.62.11273
30 PICANOL SECOND HAND DIFFERENT WEAVING MACHINES DESIGNED as AIR JET LOOMS MODEL OMNI 2/4 R 190-WORKING WIDTH 1900 MM-2/4 COLOURS with STÄUBLI ELECTRONIC DOBBY of 16 SHAFTS-YEAR of CONSTRUCTION 1996/1998
0.00
ex mill floor
2010-05-07
UM 34.241.11275
1 TMT KD SECOND HAND KD DECATISING MACHINE MODEL PF 2000-AUTOCALVE 1203 MM with 3 DECATISING CYLINDERS each Ø 400 MM-AUTOCALE in STAINLES STEEL-COOLING DEVICE-YEAR of CONSTRUCTION 1994
0.00
EURO
C&F
2010-05-07
UM 27.62.11166
20 DORNIER SECOND HAND DIFFERENT WEAVING MACHINES DESIGNED as AIR JET LOOMS MODEL LWV 2/S & LWV 4/S -NOMINAL WIDTH 3900 MM-SPLIT BEAM ARRANGEMENT-COLOUR SELECTOR-FEW with CAM MOTION others STÄUBLI ELECTRONIC DOBBY-YEAR of CONSTRUCTION 1995/1998
0.00
EURO
ex mill floor
2010-05-06
UM 24.46.11271
1 FADIS SECOND HAND WINDING MACHINE MODEL RPV with 24 WINDING POSITIONS-TAKE UP CYLINDRICAL or CONICAL - MECHANICAL THREAD GUIDERS - YEAR of CONSTRUCTION 2000
0.00
EURO
FOT
2010-05-06
UM 27.60.11046
4 VAMATEX SECOND HAND WEAVING MACHINES DESIGNED as RAPIER WEAVING AUTOMATES for COTTON TERRY WEAVE MODEL LEONARDO DYNA-WORKING WIDTH 3600 MM-FULL WIDTH BEAMS-8 COLOURS with FIMTESSILE ELECTRONIC DOBBY MODEL RD 860 S-20 SHAFTS-YEAR of CONSTRUCTION 2002
0.00
C&F
2010-05-05
UM 27.60.11270
1 DORNIER SECOND HAND WEAVING AUTOMATE DESIGNED as RAPIER WEAVING MACHINE for JACQUARD MODEL PTV 8/J -NOMINAL WIDTH 2000 MM-8 COLOURS-PRE-DISPOSED for ELECTRONIC JACQUARD MACHINE-YEAR of CONSTRUCTION 2002
0.00
EURO
FOT
2010-05-05
UM 27.60.11242
8 DORNIER SECOND HAND WEAVING MACHINES DESIGNED as RAPIER WEAVING AUTOMATES MODEL HTV 8/S 20-NOMINAL WIDTH 2100 MM-8 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2670 for 20 SHAFTS-YEAR of CONSTRUCTION 1999/2000
0.00
EURO
C&F
2010-05-03
UM 27.60.11265
40 SAURER SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL S-500-WORKING WIDTH 1850 MM with WEFT MIXER 2 plus 2 with CAM MOTION of 4 SHAFTS-YEAR of CONSTRUCTION 1989
0.00
EURO
C&F
2010-05-03
UM 24.48.11266
2 GUIDICI SECOND HAND TEXTURING MACHINES DESIGNED for YARN COUNT 11 - 300 dtex MODEL TG 20 SUPER 4/3-DOUBLE SIDED with 240 POSITIONS-FRICTION TEXTURING-HEATER with COOLING and 4 sets GIUDICI INTERMINGLING MACHINES with 36 POSITIONS-YEAR of CONSTRUCTION 92
0.00
- not spec -
2010-05-03
UM 29.130.11124
1 DORNIER SECOND HAND COMPLETE WEAVING PLANT DESIGNED as RAPIER WEAVING LINE for COTTON TERRY JACQUARD WEAVE with 1 COMSA WARPER-1 SCHLAFHORST WINDER-TITAN KNOTTING MACHINE-10 LOOMS MODEL GTN F-4/SD of 2600 MM WIDTH-YEAR of CONSTRUCTION 1982 and 1984
0.00
EURO
ex mill floor
2010-04-30
UM 41.277.11262
1 BONO second hand BOILER MODEL CMP 5000 - GAS HEATED - CAPACITY max. 5'000'000 cal/h with EXCHANGER of 8000 kg/h - YEAR of CONSTRUCTION 2000
0.00
EURO
ex mill floor
2010-04-30
UM 41.277.11263
1 BONO second hand BOILER DESIGNED as DIATERMIC OIL BOILER MODEL CMP 3000-GAS HEATED- CAPACITY max. 3'000'000 cal/h with EXCANGER of 5'000 kg/h CAPACITY max. - YEAR of CONSTRUCTION 2000/1995
0.00
EURO
ex mill floor
2010-04-30
UM 27.62.11076
12 SOMET SECOND HAND WEAVING MACHINES DESIGNED as AIR JET LOOMS MODEL MYTHOS-WORKING WIDTH 2200 MM-4 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2871-16 SHAFTS-YEAR of CONSTRUCTION 2003
0.00
EURO
FOT
2010-04-29
UM 34.98.11259
1 BABCOCK SECOND HAND SINGLE LAYER STENTER DESIGNED for WOVENS- and KNITTED GOODS-WORKING WIDTH 2200 MM with 2-BOWL FOULARD-VERTICAL COMBI CHAIN-STEAMER-4 CHAMBERS THERMAL OIL HEATED-BIG BATCH WINDER-YEAR of CONSTRUCTION 2002
0.00
- not spec -
2010-04-29
UM 27.60.11260
2 VAMATEX SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS for JACQUARD MODEL LEONARDO-WORKING WIDTH 3000 MM-8 COLOURS with STÄUBLI ELECTRONIC JACQUARD with CONTROLLER JC 5 and 2'680 HOOKS-YEAR of CONSTRUCTION 1998
0.00
- not spec -
2010-04-29
UM 22.33.10982
5 RIETER SECOND HAND COMBING MACHINES plus ONE RIETER UNILAP MODELS E 72 & E 32 with 8 POSITIONS - AUTOMATIC DOFFING - AUTOMATIC LAP CHANGER - CENTRALISED SUCTION - YEAR of CONSTRUCTION 2002
0.00
EURO
C&F
2010-04-28
UM 27.341.11255
5 BONAS VARITEX SECOND HAND DIFFERENT WEAVING MACHINES DESIGNED as LABEL LOOMS with BONAS JACQUARD -32/86 and 604 HOOKS and 35 - 65 MM - YEAR of CONSTRUCTION between 1986-1999 YEAR
0.00
EURO
C&F
2010-04-28
UM 34.186.11258
1 SCHMALE DURATE SECOND HAND CUTTING AMCHINE DESIGNED as ACROSS CUTTER MODEL C 111 - WORKING WIDTH 1200 MM - YEAR of CONSTRUCTION 1985
0.00
EURO
ex mill floor
2010-04-28
UM 45.349.11253
36 TEXILMESA/HACOBA second hand DIFFRENT WINDING MACHINES DESIGNED for SEWING YARN WINDING each with BETWEEN 4 and 12 max. WINDING POSITIONS CONNTECTED with PACKING DEVICE-YEAR of CONSTRUCTION 1980/2001
0.00
EURO
ex mill floor
2010-04-27
UM 31.141.11252
6 MONARCH SECOND HAND KNITTING MACHINES DESIGNED as CIRCULAR KNITTERS MODEL RXDF/3-CYLINDER Ø 740 MM with 96 SYSTEMS each and GG 20/24 and 16-YEAR of CONSTRUCTION 1988
0.00
EURO
C&F
2010-04-26
UM 27.62.10807
16 TSUDAKOMA SECOND HAND WEAVING MACHINES DESIGNED as AIR JET LOOMS MODEL ZA209i - WORKING WIDTH 1900/2100 MM-4 COLOURS-ELECTRONIC DOBBY STÄUBLI MODEL 2580 for 16 SHAFTS-YEAR of CONSTRUCTION 1995
0.00
C&F
2010-04-23
UM 34.101.10921
1 BRÜCKNER SECOND HAND SINGLE LAYER STENTER DESIGNED for WOVENS - WORKING WIDTH 2000 MM with BACK COATING UNIT-VERTICAL PIN CHAIN-5 CHAMBERS STEAM HEATED-BIG BATCH WINDER-YEAR of CONSTRUCTION 2003
0.00
EURO
ex mill floor
2010-04-23
UM 34.134.11194
1 OSTHOFF SECOND HAND SINGEING RANGE NODEL UNIVERSAL 94-WORKING WIDTH 3200 MM with ENTRY FRAME-CLEANING-DUSTING-2 DOUBLE JET BURNERS-FINISHING FOULARD-WINDER-YEAR of CONSTRUCTION 1996
0.00
EURO
ex mill floor
2010-04-22
UM 25.127.10645
2 BARMAG SECOND HAND COMPLETE SPINNING LINES DESIGNED for FOY and POY SPINNING COMPLETE with 2 EXTRUDERS model 9E10 each with 12 SPINNING POSITIONS-6 HEATING ZONES-QUENCHING SYSTEM-WINDER-YEAR of CONSTRUCTION 1998
0.00
EURO
ex mill floor
2010-04-21
UM 24.239.11246
1 LOT of second hand SPARE PARTS as well as TRÜTZSCHLER FCT ELECTRONICS FLAT SETTING SYSTEM-GRAF CARD GRINDER-ALUMINIUM FLATS for DK 803/903 CARDS-TRÜTZSCHLER BK803 LICKERIN
0.00
ex mill floor
2010-04-21
UM 34.103.11200
1 KÜSTERS SECOND HAND CALANDERING MACHINE DESIGNED as AN 2-BOWL CALANDER MODEL 212.7-320-WORKING WIDTH 3200 MM-UPPER CYLINDER CHROMED and GAS HEATED-LOWER BOWL RACOLAN SWIMMING-YEAR of CONSTRUCTION 1996
0.00
EURO
ex mill floor
2010-04-20
UM 23.40.11243
4 ZINSER SECOND HAND DIFFERENT SPINNING MACHINES DESIGNED as RING SPINNING FRAMES MODEL 350 with 768 SPINDLES each - RING Ø 48/52 MM-SPINDLE GAUGE 75 MM - DRAFTING SYSTEM with LYCRA DEVICE-YEAR of CONSTRUCTION 1998
0.00
EURO
ex mill floor
2010-04-20
UM 34.105.11245
1 COMET SECOND HAND RAISING MACHINE DESIGNED for WOVENS AND OPEN WIDTH and TUBULAR KNITTED GOODS MODEL PEGASO X5/VE-WORKING WIDTH 2300 MM-SINGLE DRUM with 32 RAISING ROLLERS-REVERSING DEVICE-YEAR of CONSTRUCTION 2001
0.00
EURO
C&F
2010-04-20
UM 24.46.11237
2 SSM SECOND HAND DIFEFRENT WINDING MACHINES DESIGNED as PRECISON PACKAGE ASSAMBLY WINDERS for ALL KIND of YARNS MODELS DP 3 - C/S and PS 6-D each with 40 WINDING POSITIONS for WIND CYLINDRICAL or CONICAL PACKAGE-YEAR of CONSTRUCTION 2003 and 2002
0.00
C&F
2010-04-19
UM 27.60.11239
10 VAMATEX SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL LEONARDO-WORKING WIDTH 1900 MM-8 COLOURS with FIMTESSILE ELECTRONIC DOBBY MODEL RD 840 S with 20 LEVERS-YEAR of CONSTRUCTION 1998
0.00
- not spec -
2010-04-19
UM 27.62.11240
14 SULZER RÜTI SECOND HAND WEAVING MACHINES DESIGNED as AIR JET LOOMS for SYNTHETICS MODEL L5200 S210 N2 SP-WORKING WIDTH 2100 MM-2 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2580 C with 16 LEVERS-YEAR of CONSTRUCTION 1998
0.00
- not spec -
2010-04-19
UM 24.53.11238
6 VOLKMANN SAURER SECOND HAND TWISTING MACHINES DESIGNED as COMPACT TWO for ONE TWISTER for POLYESTER, VISCIS - LYCRA MODEL VTS 08-0 SERIES 6.12 each with 208 POSITIONS-SPINDLE GAUGE 247,5 MM-YEAR of CONSTRUCTION 2002/2003
0.00
C&F
2010-04-16
UM 27.60.11235
4 PICANOL SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL GAMMA 4 R 190 with SUMO DRIVE-WORKING WIDTH 1900 MM-4 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2622 with 12 LEVERS-YEAR of CONSTRUCTION 2001
0.00
EURO
C&F
2010-04-15
UM 23.40.11165
1 RIETER SECOND HAND SPINNING MACHINE DESIGNED as RING SPINNING FRAME for COMPACT SPINNING MODEL K 44 with 1'008 SPINDLES-RING Ø 42 MM-SPINDLE GAUGE 70 MM with DRAFTING SYSTEM and DUSTING-YEAR of CONSTRUCTION 2005
0.00
EURO
C&F
2010-04-14
UM 31.76.11232
17 FUKAHARA SECOND HAND KNITTING MACHINES DESIGNED as CIRCULAR JERSEY KNITTING MACHINES DIFFERENT MODELS as well FXC or DXC etc - GAUGE 20/26 - 52 / 78 FEEDERS - YEAR of CONSTRUCTION between 1985 and 2001
0.00
- not spec -
2010-04-14
UM 23.40.11233
3 RIETER SECOND HAND SPINNING MACHINES DESIGNED as RING SPINNING FRAMES MODEL G33 with 1'056 SPINDLES each - RING Ø 40 MM - LINKED with SCHLAFHORST CONE WINDER AC 238 - YEAR of CONSTRUCTION 1998
0.00
EURO
C&F
2010-04-14
UM 29.348.11189
1 MÜLLER OMM SECOND HAND COMPLETE WEAVING INSTALLATION DESIGNED for NARROW FABRIC WEAVING with 3 MÜÜLLER LOOMS-6 sets OMM LOOMS-DIRECT WARPER & SIZING-YEAR of CONSTRUCTION BETWEEN 1980 and 2000
0.00
EURO
ex mill floor
2010-04-13
UM 35.88.11227
1 THIES SECOND HAND DYE APPARATUS DESIGNED as HIGH TEMPERATURE DYEING MACHINE with 4 ROPES - CONTENT 15150 l - TEMPERATURE max 140 °C - YEAR of CONSTRUCTION 1990
0.00
- not spec -
2010-04-13
UM 35.88.11228
2 THEN SECOND HAND DIFFERENT DYE APPARTUSES MODELS HT 360 & AFS 450 with 3 ROPES / 2 CHAMBERS - TEMPERATURE max. 150 °C - YEAR of CONSTRUCTION 1998
0.00
- not spec -
2010-04-13
UM 41.334.11229
2 THEN SECOND HAND DYE APPARTUSES DESIGNED as LABORATORY DYEING MACHINES MODEL DN 15 HL and 1 MATHIES LABOMAT BFA 12, 1 MATHIS LABDRYER, 1 MATHIES LAB-FOULARD and 1 CTS CLIMATISATION TESTER-YEAR of CONSTRUCTION 1985/86
0.00
- not spec -
2010-04-13
UM 35.196.11230
1 HISAKA SECOND HAND DYEING MACHINE DESIGNED as FOUR PORT DYE JET with 4 PORTS with PUMP - VALVES - HEAT EXCAHNGER - FILTER and CONTROLLER - YEAR of CONSTRUCTION 1986
0.00
- not spec -
2010-04-13
UM 36.180.11220
1 STORK SECOND HAND PRINTING RANGE DESIGNED as SAMPLE PRINTER MODEL MAM-4-WORKING WIDTH 1850 MM-TABLE LENGTH 11000 MM-ONE PRINTING STATION-YEAR of CONSTRUCTION 1998
0.00
- not spec -
2010-04-12
UM 31.140.11222
3 TERROT SECOND HAND DIFFERENT KNITTING MACHINES DESIGNED as CIRCULAR JACQUARD KNITTERS MODEL UP 372; UP 472 & UCC 672 - CYLINDER Ø 740 MM - GAUGE 18/24 with 72 SYSTEMS and JACQUARD-YEAR of CONSTRUCTION 1997/98
0.00
- not spec -
2010-04-12
UM 41.223.11223
1 PLM IMPIANTI SECOND HAND PACKING LINE MODEL DYNAPACK - WORKING WIDTH 2500 MM with LONGITUDINAL WELDING WIDTH 3200 MM - MAX. Ø 450 MM FABRIC ROLL-YEAR of CONSTRUCTION UNKNOWN
0.00
- not spec -
2010-04-12
UM 34.98.11226
1 BABCOCK SECOND HAND SINGLE LAYER STENTER DESIGNED for WOVEN FABRICS-WORKING WIDTH 2200 MM with MAHLO WEFT STRAIGHTNER-BETA FOULARD-HORIZONTAL PIN CHAIN-8 CHAMBERS THERMAL OIL HEATED-BATCHING and PACKING-YEAR of CONSTRUCTION 2001
0.00
- not spec -
2010-04-12
UM 34.105.11218
3 LAMPERTI SECOND HAND RAISING MACHINES DESIGNED as DOUBLE RAISING MACHINES MODEL GHM - WORKING WIDTH 2200 MM each with 2 x 24 RAISING ROLLERS - YEAR of CONSTRUCTION 1997 and 1999
0.00
- not spec -
2010-04-09
UM 36.180.11212
1 STORK SECOND HAND COMPLETE PRINTING PLANT DESIGNED for SAMPLE PRINTING MODEL MBK-WORKING WIDTH 1850 MM-4 COLOURS-640 MM REPORT-2 DRYING CHAMBERS GAS HEATED-YEAR of CONSTRUCTION 1993
0.00
EURO
ex mill floor
2010-04-08
UM 41.284.11213
1 VAN WYK SECOND HAND COLOUR KITCHEN DESIGNED as AUTOMATIC COLOUR KITCHEN for PRINT with COMPACT DISPENSER-ROLLER FEEDER with WEIGHT MEASURING-ROBOT MIXER-YEAR of CONSTRUCTION 1998
0.00
EURO
ex mill floor
2010-04-08
UM 27.62.11215
6 DORNIER SECOND HAND DIFFERENT WEAVING MACHINES DESIGNED as AIR JET LOOMS MODEL LWV 4/S-NOMINAL WIDTH 1900/2100 MM-4 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2580 C with 12 LEVERS - YEAR of CONSTRUCTION 1998
0.00
- not spec -
2010-04-08
UM 42.192.11186
1 HUNTER SECOND HAND COMPLETE NON WOVEN LINE DESIGNED as NEEDLE PUNCHING LINE for SISAL and OTHER HARD VEGETAL FIBERS for PRODUCTION PADS-EXIT SIZE 2500 MM with CUTTER-FEEDER to CARD-SPECIAL CARD-CROSS LAPPER-PRENEEDLE UNIT-CUTTERS and DELIVERY TABLE-1978
0.00
ex mill floor
2010-04-07
UM 34.134.11208
1 OSTHOFF SECOND HAND SINGEING RANGE DESIGNED for SINGEEING, DESIZING and IMPREGNATION MODEL U 80-WORKING WIDTH 3200 MM with BRUSHING- and BEATING UNIT-2 BRUSHING CYLINDERS-SINGEING with 3 POSITIONS-2 BURNERS DOUBLE JET-YEAR of CONSTRUCTION 1991
0.00
EURO
FOT
2010-04-07
UM 34.103.11209
1 KLEINEWEFERS SECOND HAND CALANDERING PLANT DESIGNED as 4-BOWL CALNDER-WORKING WIDTH 2400 MM with CYLINDERS of CHROMED STEEL, PAPER, PAPER and CHROMED STEEL HEATED by THEMAL OIL with KONUS BOILER-YEAR of CONSTRUCTION 1969/1990
0.00
EURO
ex mill floor
2010-04-07
UM 34.99.10699
1 MONFORTS SECOND HAND SINGLE LAYER STENTER DESIGNED for WOVENS and KNITTED GOODS MODEL MONTEX type 8GK-WORKING WIDTH 2400 MM with KÜSTER 2-BOWL FOULARD-WEFT STRAIGHTNER BIANCO-HORIZONTAL PIN CHAIN-5 CHAMBERS DIRECT GAS HEATED-YEAR of CONSTRUCTION 1992
0.00
EURO
ex mill floor
2010-04-05
UM 46.225.10963
1 ZSK SECOND HAND EMBROIDERY MACHINE DESIGNED as MULTI HEAD EMBROIDERY PLANT for T-SHIRTS, CAPS and CUT PARTS with 6 EMBROIDERY HEADS and 6 TABLES MODEL JAF 0615 - 400 - 15 COLOURS - YEAR of CONSTRUCTION 2007
0.00
EURO
ex mill floor
2010-04-05
UM 31.141.11205
2 MONARCH SECOND HAND KNITTING MACHINES DESIGNED as CIRCULAR KNITTING MACHINES MODEL VSEGPL T- CYLINDER Ø 740 MM- GAUGE 20 - 1'968 NEEDLES and 41 SYSTEMS - YEAR of CONSTRUCTION 1999 and 2000
0.00
- not spec -
2010-04-05
UM 31.141.11206
3 MONARCH SECOND HAND KNITTING MACHINES DESIGNED as CIRCULAR KNITTING MACHINES MODEL VSEGPL T- CYLINDER Ø 740 MM- GAUGE 20 - 1'968 NEEDLES and 41 SYSTEMS - YEAR of CONSTRUCTION 1997/1998
0.00
- not spec -
2010-04-05
UM 35.156.11202
2 THIES SECOND HAND DYE MACHINES DESIGNED as HORIZONTAL AUTOCLAVES with TWO DYE BEAMS in STAINLESS STEEL WORKING WIDTH 3200 MM and Ø 400 MM-SETEX ELECTRONIC-YEAR of CONSTRUCTION 2000
0.00
- not spec -
2010-04-01
UM 35.156.11203
1 THIES SECOND HAND DYE APPARATUS DESIGNED as HIGH TEMPERATURE AUTOCLAVE with 2 STAINLESS STEEL DYE BEAMS WORKING WIDTH 4200 MM and Ø 400 MM-SETEX ELECTRONIC-YEAR of CONSTRUCTION 2000
0.00
- not spec -
2010-04-01
UM 31.140.11221
8 MAYER & CIE SECOND HAND KNITTING MACHINES DESIGNED as CIRCULAR KNITTERS for PLUSH JACQUARD MODEL MCPE - CYLINDER Ø 640 MM - GAUGE 18 with JACQUARD - YEAR of CONSTRUCTION between 1990/1992
0.00
FOT
2010-04-01
UM 34.106.11106
1 LAFER SECOND HAND SHEARING MACHINE MODEL CMI-2-WORKING WIDTH 1800 MM with 2 SHERAING CYLINDERS of 20 BLADES EACH-DUST EXTRACTION and SCRAY at ENTRY-YEAR of CONSTRUCTION 1997
0.00
EURO
C&F
2010-03-31
UM 22.288.11150
1 SUBERBA SECOND HAND UNIVAP with 2 TANKS à 10 SPINDLES LINKED with SUPERBA WINDER MODEL BR 20 with 20 POSITIONS DESIGNED for A MAX PRODUCTION of 60 KG/H per SPINDLE-YEAR of CONSTRUCTION 1996 and 2002
0.00
FOT
2010-03-31
UM 35.166.11201
1 VALD HENRIKSEN SECOND HAND JUMBO JIGGER MODEL VH AUTOMATIC 1200-WORKING WIDTH 3000 MM with COVER HOOD and PNEUMATIC OPENING-BIG BATCH WINDER-YEAR of CONSTRUCTION 1992
0.00
- not spec -
2010-03-31
UM 27.60.11191
22 SULZER RÜTI SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS for COTTON WEAVE MODEL G6100 B190 N8 SP-WORKING WIDTH 1900 MM-8 COLOUR with STÄUBLI ELECTRONOC DOBBY MODEL 2660 for 16 SHAFTS-YEAR of CONSTRUCTION 1991
0.00
EURO
C&F
2010-03-30
UM 27.61.11198
4 SULZER RÜTI SECOND HAND WEAVING MACHINES DESIGNED as PROJECTILE LOOMS for SYNTHETIC JACQUARD WEAVE MODEL P7100 S360 N4 J-WORKING WIDTH 3600 MM-SPLIT BEAM ARRANGEMENT-4 COLOURS with STÄUBLI ELECTRONIC JACQUARD for 1344 HOOKS CONTROLLER JC-4-YEAR 1989
0.00
EURO
C&F
2010-03-30
UM 27.60.11199
50 SOMET SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS for JACQUARD WEAVEING MODEL MASTER SM 93-WORKING WIDTH 2200 MM-4 COLOURS with GROSSE MECHANICAL JACQUARD MODEL UNIRAPID with 1'200 HOOKS-YEAR of CONSTRUCTION 1987
0.00
EURO
C&F
2010-03-30
UM 27.61.11196
8 SULZER RÜTI SECOND HAND WEAVING MACHINES DESIGNED as PROJECTILE LOOMS for JACQUARD WEAVE MODEL P7100 390 N4 J-WORKING WIDTH 3900 MM-SPLIT EBAM ARRANGEMENT-4 COLOURS with STÄUBLI ELECTRONIC JACQUARD MODEL CX860 for 2'688 HOOKS CONTROLLER JC3-YEAR 1991
0.00
EURO
C&F
2010-03-29
UM 25.154.11195
1 RIETER SCHLAFHORST SECOND HAND COMPLETE SPINNING MILL DESIGNED as OPEN- END SPINNING LINE of 2'728 ROTORS with RIETER/TRÜTZSCHLER BLOW ROOM-7 CARDS DK 803-5 DRAW FRAMES RIETER-RIETER R1/R20 and SCHLAFHORST SPINMASHINES-YEAR of CONSTRUCTION 1988 - 1999
0.00
EURO
ex mill floor
2010-03-25
UM 29.216.11127
1 SOMET & SULZER RÜTI SECOND HAND WEAVING LINE DESIGNED as RAPIER JACQUARD LABEL WEAVING PLANT with SOMET TYPE SUPER EXCEL and ALPHA-WORKING WIDTH 1900/1700 MM with BONAS JACQUARD-1 SULZER G6100-2000 MM with SULZER JACQUARD & CUTTING, etc. YEAR 2003/1989
0.00
EURO
C&F
2010-03-24
UM 27.62.11162
4 DORNIER SECOND HAND WEAVING MACHINES DESIGNED as AIR JET LOOMS for JACQUARD WEAVING MODEL LWV 4/J-NOMINAL WIDTH 2000 MM-4 COLOURS with STÄUBLI ELECTRONIC JACQUARD MODEL CX 880 with 2'400 HOOKS and CONTROLLER JC4-YEAR of CONSTRUCTION 1996
0.00
ex mill floor
2010-03-24
UM 27.62.10913
1 DORNIER SECOND HAND COMPLETE WEAVING AUTOMATE DESIGNED as AIR JET LOOM MODEL AWS 4/S-NOMINAL WIDTH 1900 MM-4 COLOURS-ELECTRONIC DOBBY by STÄUBLI MODEL 2861 with 12 LEVERS-AT ELECTRONIC-YEAR of CONSTRUCTION 2006
0.00
EURO
ex mill floor
2010-03-23
UM 35.85.10928
1 MONFORTS SECOND HAND SANFORISING SHIRINKING RANGE - WORKING WIDTH 1800 MM with HUMIDIFICATION DRUM - MINI STENTER - SHIRINKING UNIT and PALMER CALANDER -YEAR of CONSTRUCTION 1988
0.00
EURO
C&F
2010-03-23
UM 36.129.10674
1 ZIMMER SECOND HAND PRINTING RANGE DESIGNED as ROTATION SCREEN PRINTING MACHINE - WORKING WIDTH 3200 MM with 14 INSTALLED COLOURS with DIRECT GAS HEATED 3 COMPARTMENTS - YEAR of CONSTRUCTION 1991
0.00
EURO
C&F
2010-03-22
UM 34.99.10870
1 BABCOCK SECOND HAND SINGLE LAYER STENTER DESIGNED for WOVENS MODEL 5301-WORKING WIDTH 2400 MM with KÜSTERS FOULARD-BIANCO WEFT STRAIGHTNER-COMBI CHAIN-6 CHAMBERS GAS HEATED-BIANCO WEFT STRAIGHTNER-BATCHER-YEAR of CONSTRUCTION 2000
0.00
- not spec -
2010-03-22
UM 41.223.11192
2 OFFRI SECOND HAND DIFFERENT INSPECTING MACHINES DESIGNED for WORKING BIG BATCH WINDER to BIG BATCH WINDER-WORKING WIDTH 4200 MM and 3200 MM-HYDRAULIC AXIAL DRIVE-YEAR of CONSTRUCTION 1998 and 1990
0.00
- not spec -
2010-03-22
UM 27.60.10484
1 SOMET SECOND HAND WEAVING MACHINE DESIGNED as RAPIER LOOM MODEL SUPER EXCEL-WORKING WIDTH 2300 MM-8COLOURS-STÄUBLI ELECTRONIC DOBBY MODEL 2612 with 12 LEVERS-ELTEX JACQUARETTE-YEAR of CONSTRUCTION 1998
0.00
- not spec -
2010-03-19
UM 27.60.11016
3 DORNIER SECOND HAND WEAVING AUTOMATES DESIGNED as RAPIER LOOMS MODEL HTV 4/S-NOMINAL WIDTH 3400 MM-SINGLE BEAM EXECUTION-4 COLOURS with ELECTONIC SELECTOR with STÄUBLI DOBBY MODEL 2670-20 SHAFTS-YEAR of CONSTRUCTION 2001
0.00
EURO
FOT
2010-03-19
UM 34.99.11063
1 MONFORTS SECOND HAND COMPLETE SINGLE LAYER STENTER DESIGNED for WOVENS and KNITTED GOODS-WORKING WIDTH 2200 MM with BETA FINISHING FOULARD-BIANCO WEFT STRAIGHTNER-HORIZONTAL PIN CAIN-7 CHAMBERS GAS HEATED-YEAR of CONSTRUCTION 1988
0.00
EURO
ex mill floor
2010-03-19
UM 27.62.11115
11 SULZER RÜTI SECOND HAND WEAVING MACHINES DESIGNED as AIR JET LOOMS for COTTON WEAVE MODEL L5100 B220 N1-1 EP-WORKING WIDTH 2200 MM-WEFT MIXER with CAM MOTION DESIGNED for 16 LEVERS-YEAR of CONSTRUCTION 1989
0.00
EURO
FOT
2010-03-19
UM 41.131.11187
1 CORINO SECOND HAND WEFT STRAIGHTENER DESIGNED for WOVENS MODEL SUPER N - WORKING WIDTH 2000 MM - ROLLER WIDTH 2200 MM - PIN WHEELS - YEAR of CONSTRUCTION 1995
0.00
EURO
FOT
2010-03-17
UM 27.60.11188
6 DORNIER SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL HTV 8/SD-NOMINAL WIDTH 1900 MM-8 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2670 with 20 SHAFTS-YEAR of CONSTRUCTION 1998
0.00
EURO
ex mill floor
2010-03-17
UM 41.131.11185
1 MAHLO SECOND HAND WEFT STRAIGHTNER DESIGNED as AUTOMATIC WEFT STRAIGHTNER for WOVEN FABRICS MODEL RFMC-10 P - WORKING WIDTH 2200 MM - ROLLER WIDTH 2400 MM - 4 HEADS - YEAR of CONSTRUCTION 1998
0.00
EURO
FOT
2010-03-16
UM 35.86.10547
1 GOLLER SECOND HAND COMPLETE WASHING RANGE DESIGNED as OPEN WIDTH LINE for WOVENS - WORKING WIDTH 3200 MM with TWO WASH DEPARTMENTS EACH with ROLLER and SIVE DRUM BOX with SQUEEZERS - BATCHING MOTION HEAT EXCHANGER-YEAR of CONSTRUCTION 1999
0.00
EURO
ex mill floor
2010-03-15
UM 24.158.10935
1 USTER SECOND HAND AUTOMATIC COMPLETE TESTING UNIT MODEL 4 SX/A/CS with PROBE MS 120-HAIRNESS CONTROL BIG UNWINDING DEVICE-CREEL of 24 POSITIONS and SOFTWARE also for KNITTED FABRIC - YEAR of CONSTRUCTION 2001
0.00
EURO
CIF
2010-03-15
UM 23.41.11183
2 SCHLAFHORST SECOND HAND SPINNING MACHINES DESIGNED as ROTOR SPINNING FRAMES MODEL SRK with 216 ROTORS-ROTOR Ø 36 MM-OPENING ROLLERS OS 21-SPIN BOX SE - 8-YEAR of CONSTRUCTION 1991
0.00
C&F
2010-03-12
UM 27.61.11184
8 SULZER RÜTI SECOND HAND WEAVING MACHINES DESIGNED as PROJECTILE LOOMS for COTTON WEAVING in REINFORCED EXECUTION MODEL P7100 B36 N1-1 EP R D1-WORKING WIDTH 3600 MM-SPLIT BEAM ARRANGEMENT-WEFT MIXER-CAM MOTION with 10 SHAFTS-YEAR of CONSTRUCTION 1998
0.00
EURO
C&F
2010-03-12
UM 27.60.11182
1 NUOVO PIGNONE SECOND HAND WEAVING MACHINE DESIGNED as RAPIER LOOM for COTTON TERRY JACQUARD WEAVING MODEL TPS 638-WORKING WIDTH 3800 MM-8 COLOURS with STÄUBLI ELECTRONIC JACQUARD MODEL CX 960 for 3'072 HOOKS-YEAR of CONSTRUCTION 1995
0.00
- not spec -
2010-03-11
UM 27.292.11175
4 GÜNNE SECOND HAND DIFEFRENT WEAVING MACHINES DESIGNED as FACE TO FACE LOOMS for VELEVET WEAVE MODEL PG 160 & PG 180-WIDTH 1600 and 1800 MM with STÄUBLI MECHANICAL DOBBY MODEL 2412 & 1230 for 4 PILE- and 8 GROUND SHAFTS-YEAR of CONSTRUCTION 1984/1980
0.00
- not spec -
2010-03-10
UM 27.60.11173
10 VAMATEX SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL P 1001-WORKING WIDTH 2100 MM-8 COLOURS with FIMTESSILE ELECTRONIC DOBBY MODEL RD 800 for 20 LEVERS-YEAR of CONSTRUCTION 1990
0.00
EURO
FOT
2010-03-09
UM 24.46.11153
1 SCHLAFHORST SECOND HAND WINDING MACHINE DESIGNED as AUTOMATIC CONE WINDER MODEL AUTOCONO AC 338 with 40 POSITIONS-ROUND MAGAZINE-2 DOFFERS-CONOMETER-PROPACK-CLEARER USTER QUANTUM-YEAR of CONSTRUCTION 2002
0.00
EURO
C&F
2010-03-08
UM 22.34.11128
1 RIETER SECOND HAND CARDING MACHINE MODEL C 60 H with AUTOLEVELLER-COILER model CBA4 with INTEGRATED CHUTE FEED-IGS CLASSING SYSTEM-YEAR of CONSTRUCTION 2003
0.00
EURO
C&F
2010-03-05
UM 27.60.11168
5 DORNIER SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL HTV 8/S 28-NOMINAL WIDTH 2200 MM-8 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2660 - 28 SHAFTS-YEAR of CONSTRUCTION 1992
0.00
EURO
FOT
2010-03-05
UM 27.60.11169
3 DORNIER SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL HTV M / S-NOMINAL WIDTH 2600 MM-2 COLOURS with STÄUBLI MECHANICAL DOBBY MODEL 2217 - 6 LEVERS-YEAR of CONSTRUCTION 1991
0.00
EURO
FOT
2010-03-05
UM 27.60.11158
6 VAMATEX SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL LEONARDO - WORKING WIDTH 1900 MM - WEFT SLECTOR 8 COLOURS with FIMTESSILE ELECTRONIC DOBBY MODEL RD 840 with 20 SHAFTS - YEAR of CONSTRUCTION 1997
0.00
EURO
ex mill floor
2010-03-04
UM 34.103.9639
1 KLEINEWEFERS second hand CALANDERING MACHINE DESIGNED as 4-BOWL CALENDER for COTTON-WORKING WIDTH 2600 MM with RANCOLAN, STEEL, WOOLPAPER and STEEL CYLINDER-OIL HEATED, made in 1991 year
0.00
EURO
ex mill floor
2010-03-03
UM 23.40.10668
2 RIETER SECOND HAND SPINNING MACHINES DESIGNED as RING SPIN FRAMES MODEL G33 with 1'008 SPINDLES each-SPINDLE GAUGE 70 MM-RING Ø 42 MM-ROBOLOAD-ELECTRO-JET OVERHEAD CLEANER-YEAR of CONSTRUCTION 2003
0.00
EURO
C&F
2010-03-03
UM 24.53.11163
5 VOLKMANN SECOND HAND DIFFERENT TWISTING RANGES DESIGNED as TWO FOR ONE TWISTER MODEL VTS 07 with 176 and 192 POSITIONS with DUO POT 2 x 6 and PNEUMATIC THREADING-WAXING DEVICE-INVERTER-YEAR of CONSTRUCTION between 1999 and 2007
0.00
- not spec -
2010-03-03
UM 22.34.11059
1 THIBEAU SECOND HAND CARDING MACHINE DESIGNED as WORSTED CARD for WOOL MODEL CA 6 type 3 M 2 M5 with VOLUMETRIC HOPPER FEEDER-BREST SECTION with 2 PAIR WORKERS & STRIPPERS-SWIFT with 5 PAIRS-ELECTRONIC DOFFING COMB-YEAR of CONSTRUCTION 1988
0.00
FOT
2010-03-02
UM 35.156.11125
1 ONE NEW DYE APPARATUS DESIGNED for YARN DYEING of WOOL, COTTON, POLYESTER, VISCOSE and SILK etc. MACHINE with 4 COLOURS-BATH CONTINUOUS CIRCULATION-ATUMATIC WASHING of DYES LOCATION-BOBBINS with 28 POSITIONS plus 28 RESERVE-HANKS from 1600 to 1800 MM-
0.00
EURO
CIF
2010-03-02
UM 27.62.11160
9 DORNIER SECOND HAND WEAVING MACHINES DESIGNED as AIR JET LOOMS MODEL LW 4/E-NOMINAL WIDTH 1900 MM-4 COLOURS with STÄUBLI CAM MOTION MODEL 1607-8 SHAFTS-YEAR of CONSTRUCTION 1993
0.00
EURO
C&F
2010-02-26
UM 25.154.11161
1 TRÜTZSCHLER & SCHLAFHORST SECOND HAND COMPLETE SPINNING LINE DESIGNED as OPEN- END SPINNING PLANT with 2'160 ROTORS with COMPLETE BLOW ROOM-8 CARDS DK 803-6 DRAW FRAMES HS/HSR 900-9 SPINNING FRAMES with SE-9 SPIN BOX-YEAR of CONSTRUCTION 1990/2004
0.00
EURO
- not spec -
2010-02-26
UM 34.340.11159
1 BIANCO SECOND HAND SLITTING MACHINE DESIGNED for WOVENS and KINNTED GOODS MODEL TAGLIERINA - WORKING WIDTH 2200 MM with J-BOX-FOULARD-AUTOMATIC DETWISTER-KÜSTERS DYE FOULARD-YEAR of CONSTRUCTION 1996
0.00
EURO
ex mill floor
2010-02-25
UM 26.58.11025
1 BENNINGER SECOND HAND COMPLETE WARPING PLANT DESIGNED as SECTIONAL WARPER MODEL SUPERTRONIC SF-P - WORKING WIDTH 3800 MM with BEAMER DESIGNED for BEAMS FLANGES Ø 1000 MM-WAXING with CREEL 480 YARNS plus 480 SPARES-YEAR of CONSTRUCTION 1990
0.00
EURO
FOT
2010-02-24
UM 27.60.11154
6 VAMATEX SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS for JACQUARD WEAVING MODEL LEONARDO/P1001ES-WORKING WIDTH 1900 MM-8 COLOURS with GROSSE ELECTRONIC JACQUARD for 1'344 HOOKS-YEAR of CONSTRUCTION 1998/96
0.00
- not spec -
2010-02-24
UM 26.58.11155
1 MAZZONI SECOND HAND WARPING RANGE DESIGNED as SECTIONAL WARPER-WORKING WIDTH 2200 MM with BEAMER DESIGNED for BEAM FLANGES Ø 1000 MM - CREEL with 300 POSITIONS - YEAR of CONSTRUCTION 1985
0.00
EURO
FOT
2010-02-24
UM 26.58.11156
1 FATTORI SECOND HAND WARPING PLANT DESIGNED as SECTIONAL WARPER-WORKING WIDTH 2200 MM with BEAMER DESIGNED for BEAM FLANGES Ø 1000 MM-D.C. MOTORS with CREEL with 404 YARNS-YEAR of CONSTRUCTION 1984
0.00
EURO
FOT
2010-02-24
UM 27.61.11157
1 SULZER RÜTI SECOND HAND WEAVING MACHINE DESIGNED as PROJECTILE LOOM for COTTON WEAVE MODEL P7250 B360 N4 SP-WORKING WIDTH 3600 MM with SPLIT BEAM ARRANGEMENT-4 COLOURS with STÄUBLI DOBBY - 18 SJAFTS - YEAR of CONSTRUCTION 1999
0.00
EURO
C&F
2010-02-24
UM 26.59.7833
1 SUCKER MÜLLER made SIZING range, working width 2600 mm HEAD STOCK beaming machine working width 3200 mm, designed for MAX. BEAM Ø 800 mm, DOUBLE SIZE BOX and 11 TEFLONIZED drying cylinders, built in 1980 year
0.00
EURO
ex mill floor
2010-02-23
UM 34.122.8468
1 SPEROTTO second hand STEAMING MACHINE model SG-ZERO working width 1800 mm with STEAMING TUNNEL and VIBRATEING CARPET, PHOTOCELL SYSTEM to FEEDING the FABRICS on CARPE, EXIT with ADJUSTABLE FOLD SIZE, built in 1993 year
0.00
EURO
ex mill floor
2010-02-23
UM 24.46.11142
1 SCHLAFHORST SECOND HAND WINDING MACHINE DESIGNED as AUTOMATIC CONER MODEL AUTOCONO AC 238 DX with 60 POSITIONS with DX STATION-SPLICER, CLEANER LOEPFE FR 700, CLEANING HEAD TK 740-AUTOMATIC DOFFING-YEAR of CONSTRUCTION 1993
0.00
EURO
FOT
2010-02-22
UM 26.58.10732
1 ROTAL SECOND HAND WARPING RANGE DESIGNED as DIRECT WARPER MODEL RS 100/180 - WORKING WIDTH 1800 MM for BEAM FLANGES Ø 1000 MM with AUTOMATIC BEAM DOFFING and ROSTONI TRUCKS CREEL of 840 YARNS-GAUGE 270 MM-14 plus 14 TRUCKS-YEAR of CONSTRUCTION 1995
0.00
EURO
ex mill floor
2010-02-19
UM 26.59.11152
1 SUCKER & MÜLLER SECOND HAND COMPLETE SIZING RANGE DESIGNED for BEAMS WIDTH 2200 MM and Ø 1000 MM with HEAD STOCK 4600 MM with HACOBA DIRECT WARPER with ENOVA DIRECT WARPER-YEAR of CONSTRUCTION 1994;1995 & 2000
0.00
- not spec -
2010-02-19
UM 26.58.10535
1 COMSA SECOND HAND COMPLETE WARPING INSTALLATION DESIGNED as SECTIONAL WARPING MACHINE MODEL UNI-30-WORKING WIDTH 2400 MM with SEMI AUTOMATIC LEASING-BEAMING DEVICE DESIGNED for BEAMS FLANGES Ø 1000 MM-WAXING and AUTODOFFING-CREEL of 400 YARNS-YEAR 2004
0.00
EURO
ex mill floor
2010-02-18
UM 34.118.11130
1 CROSTA SECOND HAND BRUSHING MACHINE MODEL SPT6 DESIGNED for WOVENS and KNOTTED GOODS - WORKING WIDTH 2400 MM with 6 CERAMIC BRUSHES plus 6 BRUSHES CARBON - DECURLING ROLLERS - YEAR of CONSTRUCTION 2004
0.00
EURO
C&F
2010-02-18
UM 27.60.11151
13 SOMET SECOND HAND RAPIER LOOMS MODEL AC2/S-WORKING WIDTH 2100 MM-8 COLOURS with STÄUBLI MECHANICAL DOBBY with 20 SHAFTS-YEAR of CONSTRUCTION between 1975 and 1981
0.00
EURO
FOT
2010-02-18
UM 28.124.11148
1 STÄUBLI SECOND HAND DRAWING-IN MACHINE MODEL DELTA 110-WORKING WIDTH 2300 MM with ONE COMFORT TROLLEY and DIFFERENT HOOKS for DIFFERENT YARNS-STANDARD ACCESSORIES-YEAR of CONSTRUCTION 2000
0.00
EURO
FOT
2010-02-17
UM 34.99.11141
1 BABCOCK SECOND HAND SINGLE LAYER STENTER DESIGNED for WOVENS-WORKING WIDTH 2000 MM with BIANCO FINSISHING FOLUARD-BIANCO WEFT STRAIGTHNER-HORIZONTAL PIN CHAIN-6 CHAMBERS DIRECT GAS HEATED-BIG BATCH WINDER-YEAR of CONSTRUCTION 2001
0.00
EURO
ex mill floor
2010-02-16
UM 34.137.11084
1 ROITEX SECOND HAND COMPLETE COATING RANGE DESIGNED as TRIPLE HEAD COATING - WORKING WIDTH 2000 MM with THREE CONVEYOR DRYING SECTIONS with CHEMICAL KITCHEN and BOILER - YEAR of CONSTRUCTION 1994
0.00
EURO
FOT
2010-02-15
UM 28.295.11077
30 SECOND HAND BUT COMPLETLY BRAND NEW WARP BEAMS DESIGNED for ANY EACH TYPE of WEAVING MACHINES DESIGNED for WORKING WIDTH 1900-2000 MM and FLANGES Ø 800 MM-YEAR of CONSTRUCTION UNKNOWN
0.00
EURO
ex mill floor
2010-02-12
UM 28.347.11107
1 KARL MAYER SECOND HAND COMPLETE CREEL DESIGNED for WARPERS with 400 and YARN BRAKE DEVICE- YARNS-YEAR of CONSTRUCTION 2000
0.00
EURO
ex mill floor
2010-02-12
UM 34.105.11140
1 COMET SECOND HAND RAISING MACHINE MODEL PEGASO X4 S-WORKING WIDTH 2600 MM with UNCURLERS at INLET-32 RAISING ROLLERS-A.C. MOTORISATION-INVERTER-YEAR of CONSTRUCTION 2004
0.00
EURO
ex mill floor
2010-02-12
UM 38.320.10740
1 BRÜCKNER and STORK SECOND HAND COMPLETE FABRIC COATING RANGE-WORKING WIDTH 2200 MM with 3 BULK LATEX TANKS + 3 STAINLESS STEEL-MIXER-BRÜCKNER SINGLE LAYER STENTER, GAS HEATED with COMBI CHAIN-STORK COATING- FINISHING-YEAR of CONSTRUCTION 1987
0.00
EURO
FOT
2010-02-11
UM 26.58.10959
1 SUZUKI SECOND HAND COMPLETE WARPING RANGE DESIGNED as SAMPLE WARPER MODEL NAS 140 Super-WIDTH 2250 MM with HIGH SPEED SELECTRO of 10 plus 8 COLOURS-STANDARD CREEL 10 COLOURS-ROTARY CREEL 8 COLOURS-CAN OPERATE with BOTH CREELS-DRAW BACK SYSTEM-YEAR 2001
0.00
EURO
FOT
2010-02-11
UM 28.188.11134
1 STÄUBLI SECOND HAND JACQUARD MACHINE DESIGNED as ELECTRONIC CONTROLLED JACQUARD HEAD MODEL CX 960 DESIGNED for 5'120 HOOKS with 4 800 HOOKS MOUNTED on m4.2 MODULES for TOTAL 19'200 YARNS HARNESS-WIDTH 3000 MM-CONTROLLER JC5-YEAR of CONSTRUCTION 1997
0.00
EURO
FOT
2010-02-11
UM 27.60.11136
24 VAMATEX SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL LEONARDO-WORKING WIDTH 1900 MM-8 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2670 with 20 SHAFTS-YEAR of CONSTRUCTION between 1998 and 2001
0.00
- not spec -
2010-02-11
UM 27.60.11137
12 NUOVO PIGNONE SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL TP 600 -WORKING WIDTH 2200 MM-8 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2660 for 20 SHAFTS-YEAR of CONSTRUCTION 1990
0.00
EURO
FOT
2010-02-11
UM 34.99.11132
1 BRÜCKNER SECOND HAND SINGLE LAYER STENTER DESIGNED for WOVENS and KNITTED GOODS-WORKING WIDTH 2200 MM with 2-BOWL FINISHING FOULARD-STEAMER-VERTICAL RETURN PIN CHAIN-3 CHAMBERS DIRECT GAS HEATED-SMALL ROLL-YEAR of CONSTRUCTION 2001
0.00
- not spec -
2010-02-10
UM 41.223.11133
1 TESTA SECOND HAND INSPECTING RANGE DESIGNED as ROLLING- and WRAPPING MACHINE MODEL III.BGY EK3P-WORKING WIDTH 3400 MM-FABRIC ROLL Ø 500 MM max with ENTRY FRAME-TENSION CONTROL-STRETCHER-CENTERING-LABELLING DEVICE-YEAR of CONSTRUCTION 2004
0.00
EURO
ex mill floor
2010-02-10
UM 27.292.10966
2 VAN DE WIELE SECOND HAND DIFFERENT WEAVING MACHINES DESIGNED for JACQUARD CARPET WEAVING MODELS VMM-32; MPS and VTR-33-WIDTH 2400/2500 MM with PTX JACQUARD with 6'720 HOOKS-YEAR of CONSTRUCTION 2000 and 2002
0.00
EURO
C&F
2010-02-09
UM 24.158.11129
2 USTER SECOND HAND TENSORAPID III TESTER with TESTER - SIGNAL PROCESSOR - PRINTER - FILTER and CREEL - YEAR of CONSTRUCTION 1994 and 1999
0.00
- not spec -
2010-02-08
UM 27.60.11123
4 SOMET SECOND HAND DIFFERENT WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL SUPER EXCEL and THEMA 11 E-WORKING WIDTH 2200 MM-8 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2660 DESIGNED for 20 SHAFTS-YEAR of CONSTRUCTION 1997/98 and 1994
0.00
- not spec -
2010-02-05
UM 23.40.11126
2 RIETER SECOND HAND DIFFERENT SPINNING MACHINES DESIGNED as RING SPINNING FRAMES for COTTON MODEL K 44 with 960 and 1'008 SPINDLES-GAUGE 70 MM-RING Ø 38/40 MM-DRAFTING SYSTEM P3/1 LINKED with MURATA CONERS-YEAR of CONSTRUCTION 2002
0.00
- not spec -
2010-02-05
UM 25.119.11120
1 MARZOLI SECOND HAND COMPLETE SPINNING PLANT DESIGNED as RING SPINNING LINE of 9'720 SPINDLES with COMPLETER BLOW ROOM-10 CARDS CX 400-4 DRAF FRAMES-8 COMBERS-2 FLYER-9 SPIN FRAMES LINKED with WINDERS-YEAR of CONSTRUCTION 1997/98-2000
0.00
- not spec -
2010-02-04
UM 28.283.11121
28 ROJ DART SECOND HAND WEFT FEEDERS DESIGNED as WEFT YARN PRE-FEEDERS - YEAR of CONSTRUCTION 2000
0.00
- not spec -
2010-02-04
UM 35.85.11088
1 MONFORTS SECOND HAND SANFORISING PLANT MODEL TOPTEX - WORKING WIDTH 1800 MM with GRINDING MACHINE DESIGNED for RUBBER BELT - TWO RECORD DRIVES - YEAR of CONSTRUCTION 2006
0.00
EURO
FOT
2010-02-03
UM 36.129.10715
1 STORK SECOND HAND PRINTING RANGE DESIGNED as ROTATION SCREEN PRINTING MACHINE MODEL PEGASUS-WORKING WIDTH 3200 MM DESIGNED for 12 COLOURS-10 COLOURS-3 DRYING PASSAGES DIRECT GAS HEATED-YEAR of CONSTRUCTION 1998
0.00
EURO
ex mill floor
2010-02-02
UM 27.60.11116
8 SULZER SMIT SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL G6300 190 N4 SP - WORKING WIDTH 1900 MM-4 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2670 for 20 SHAFTS-YEAR of CONSTRUCTION 2000
0.00
EURO
FOT
2010-02-02
UM 27.60.11113
6 DORNIER SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL HTV S6/S-NOMINAL WIDTH 2200 MM-6 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2670 - 20 LEVERS-YEAR of CONSTRUCTION 1998
0.00
EURO
ex mill floor
2010-02-01
UM 26.58.11103
1 KARL MAYER SECOND HAND WARPING RANGE DESIGNED as SAMPLE WARPER MODEL ROM 2 -WORKING WIDTH 2200 MM with CREEL of 14 COLOURS and 12 COLOURS with BEAMER and WAXING DEVICE- YEAR of CONSTRUCTION 2001
0.00
EURO
ex mill floor
2010-01-27
UM 23.40.11108
4 MARZOLI SECOND HAND DIFFERENT SPINNING MACHINES DESIGNED as RING SPINNING FRAMES MODEL RST 1 with 480/528 SPINDLES-GAUGE 75/70 MM and RING Ø 50/48 MM with STEAMER and LINKED to MURATA CONE WINDERS-YEAR of CONSTRUCTION 2003/2000
0.00
- not spec -
2010-01-27
UM 27.62.11109
2 PICANOL SECOND HAND WEAVING MACHINES DESIGNED as AIR JET LOOMS MODEL OMNI PLUS 6 P 250 - WORKING WIDTH 2500 MM - 6 COLOURS with STÄUBLI CAM BOX MODEL 1761 A - 10 SHAFTS- YEAR of CONSTRUCTION 2001
0.00
- not spec -
2010-01-27
UM 27.61.3435
2 SULZER second hand PROJECTILE WEAVING MACHINES DESIGNED for COTTON WEAVING -REINFORCED model P7200 B280 N2 RK K3 working width 2800 mm, 2 colours, CAM MOTION -10 levers- CARBON PROJECTILES, built in 1994 year
0.00
EURO
C&F
2010-01-26
UM 23.40.11101
8 TEXTIMA SECOND HAND SPINNING MACHINES DESIGNED as RING SPINING FRAMES MODEL 2113 each with 432 SPINDLES-RING Ø 48 MM - DRAFT 11,02 - 48,72 and TWIST RANGE 170 - 1050 M - YEAR of CONSTRUCTION 1986/87
0.00
EURO
ex mill floor
2010-01-25
UM 24.69.11102
1 SET of DIFFERENT LABORATORY YARN TESTING EQUIPMENTS for SPINNING of which SNOB ROLLS GRINDING-HAND LEVELER-CLASSIMAT WINDER-USTER for LABORATORY-ELECTRIC YARN REEL TWIST COUNTER-DRYER etc.
0.00
EURO
ex mill floor
2010-01-25
UM 27.60.11104
14 VAMATEX SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOM MODEL LEONARDO-WORKING WIDTH 1900 MM-8 COLOURS with FIMTESSILE ELECTERONIC DOBBY MODEL RD 4010 with 20 LEVERS-YEAR of CONSTRUCTION 2000/2003
0.00
- not spec -
2010-01-25
UM 27.60.11105
14 VAMATEX SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOM MODEL P1001 ES-WORKING WIDTH 1900 MM-8 COLOURS with FIMTESSILE ELECTERONIC DOBBY MODEL RD 840 with 20 LEVERS-YEAR of CONSTRUCTION 1995/96
0.00
- not spec -
2010-01-25
UM 26.58.8333
1 GA.MA.TEX second hand WARPING MACHINE DESIGNED for SECTIONAL WARPING model G 405/c working width 2100 mm with LEASING REED and BEAMING UNIT for BEAM FLANGES Ø 1000 mm, with WAXING and AUTOMATIC DOFFING, BENNINGER CREEL with 416 BOBBINS, year 1989
0.00
EURO
ex mill floor
2010-01-22
UM 34.98.11099
1 BABCOCK SECOND HAND SINGLE LAYER STENTER DESIGNED for WOVENS-WORKING WIDTH 1900 MM with STEAMER - HORIZONTAL PIN CHAIN - 4 CHAMBERS THERMAL OIL HEATED - YEAR of CONSTRUCTION 1988
0.00
EURO
FOT
2010-01-22
UM 24.46.11100
2 SAVIO SECOND HAND DIFFERENT WINDING MACHINES DESIGNED as AUTOMATIC CONE WINDERS MODEL ESPERO E with 60 and 24 WIND POSITIONS-AUTOMATIC DOFFING-AUTOMATIC FEEDING-WAXING DEVICE-SPLICER-YEAR of CONSTRUCTION 1997
0.00
- not spec -
2010-01-22
UM 23.40.11093
4 RIETER SECOND HAND SPINNING MACHINES DESIGNED as RING SPINNING FRAMES for COTTON MODEL G 30 each with 816 SPINDLES-GAUGE 70 MM-RING Ø 42 MM-TUBES 210 MM-AUTOMATIC DOFFINF LINKED with MURATA 7-II / SCHLAFHORST AC 338-YEAR of CONSTRUCTION 1994
0.00
- not spec -
2010-01-21
UM 23.40.11094
1 RIETER SECOND HAND SPINNING MACHINE DESIGNED as RING SPINNING FRAME for COMPACT COTTON SPINNING MODEL K40 with 816 SPINDLES-GAUGE 70 MM-RING Ø 40 MM-TUBES 210 MM LINKED with SCHLAFHORST CONE WINDER model AC 338 of 24 POSITIONS with WAXING-YEAR 1997
0.00
- not spec -
2010-01-21
UM 26.58.11095
1 HACOBA SECOND HAND WARPING MACHINE DESIGNED as SECTIONAL WARPER-WORKING WIDTH 2300 MM with BEAMING MACHINE DESIGNED for WARP BEAM FLANGES Ø 1000 MM-WAXING DEVICE with CREEL of 2 x 320 YARNS-YEAR of CONSTRUCTION 1995
0.00
- not spec -
2010-01-21
UM 26.58.11096
1 HACOBA SECOND HAND WARPING MACHINE DESIGNED as SECTIONAL WARPER-WORKING WIDTH 2300 MM with BEAMING MACHINE DESIGNED for WARP BEAM FLANGES Ø 1000 MM-WAXING DEVICE with CREEL of 2 x 320 YARNS-YEAR of CONSTRUCTION 2001
0.00
- not spec -
2010-01-21
UM 24.51.11097
2 SIMET SECOND HAND MINI TWISTERS each with 2 TWIST POSITIONS - YEAR of CONSTRUCTION 1999
0.00
EURO
ex mill floor
2010-01-21
UM 36.95.10771
1 STORK SECOND HAND COMPLETE PRINTING RANGE DESIGNED as ROTARY PRINTER MODEL RD DD 2250/12-PRINTING WIDTH 2250 MM with 8 COLOURS INSTALLED with DRYER MODEL TR-B/2250 DIRECT GAS HEATED-YEAR of CONSTRUCTION 1995
0.00
EURO
ex mill floor
2010-01-20
UM 34.137.11087
1 RE.CO.MO SECOND HAND COATING HEAD DESIGNED as UNIVERSAL TYPE SUITABLE as SINGLE MACHINE - NEVER PUT in OPERATION-WORKING WIDTH 1800 MM with FREQUENCY INVERTER DRIVE plus 2 HANSA WERKE FOAM MIXER MODEL 71015-YEAR of CONSTRUCTION 2003 and 1992
0.00
EURO
FOT
2010-01-20
UM 27.346.11091
12 DORNIER SECOND HAND DIFFERENT WEAVING MACHINES DESIGNED as AIR JET and RAPIER LOOMS for DOBBY nad JACQUARD WEAVING for CURTAINS of 6 x AWS 6/S & LWV 8/J,HTV 8/J-NOMINAL WIDTH 3500/3800 MM with STÄUBLI DOBBY 2871/STÄUBLI JACQUARD CX 960/870-1999-05
0.00
- not spec -
2010-01-20
UM 41.334.11083
3 MATHIS & ONE GAVAZZI SECOND HAND DIFFERENT LABORATORY FINISHING MACHINES of which LABOMAT MODEL BFA-8; DYEING FOULARD MODEL HVF; STENTER DH & PAD BATCH PADDER-YEAR of CONSTRUCTION 2000/2002
0.00
EURO
ex mill floor
2010-01-18
UM 34.99.11007
1 MONFORTS SECOND HAND COMPLETE SINGLE LAYER STENTER DESIGNED for WOVENS MODEL 10 GK-WORKING WIDTH 2000 MM with 2-BOWL FOULAR-MAHLO WEFT STRAIGHTNER-HORIZONTAL COMBI CHAIN-5 CHAMBERS GAS HEATED-YEAR of CONSTRUCTION 1985
0.00
EURO
ex mill floor
2010-01-15
UM 27.60.11015
22 NUOVO PIGNONE SECOND HAND WEAVING LOOMS DESIGNED as RAPIER LOOMS MODEL TP 600-WORKING WIDTH 2200 MM-8 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2660 with 20 LEVERS-YEAR of CONSTRUCTION 1990/1993
0.00
EURO
FOT
2010-01-15
UM 27.61.11071
42 SULZER SULTEX SECOND HAND WEAVING AUTOMATES DESIGNED as PROJECTILE WEAVING MACHINES for COTTON WEAVE MODEL P7300 B330 N4 SP-WORKING WIDTH 3300 MM-SPLIT BEAM ARRANGEMENT-4 COLOURS with STÄUBLI DOBBY MODEL 2665-16 LEVRS-YEAR of CONSTRUCTION 2004
0.00
EURO
ex mill floor
2010-01-14
UM 34.122.11078
1 SPEROTTO RIMAR SECOND HAND STEAMING MACHINE MODEL STABILA-WORKING WIDTH 2000 MM with TENSION BARS-BRUSHING-DOGAL CYLINDER and UNDERPRESSURE TUNNEL add. COMAR EQUALISING MACHINE-YEAR of CONSTRUCTION 2000
0.00
EURO
FOT
2010-01-14
UM 22.39.11064
1 NSC SCHLUMBERGER SECOND HAND GILL DESIGNED as BLENDING GILL MODEL GN 6 - 19 with BLENDING with 2 GILLING HEADS and SLIVER EQUALISING - ENTRY from 24 BOBBINS - EXIT INTO ONE CAN-YEAR of CONSTRUCTION 1985
0.00
- not spec -
2010-01-11
UM 23.41.11060
2 ELITEX SECOND HAND SPINNING MACHINES DESIGNED as ROTOR SPINNING FRAMES MODEL BD 200 S each with 200 ROTORS - ROTOR Ø 43 MM and 54 MM - COMBING ROLLERS type OK 40 - YEAR of CONSTRUCTION 1988 approx
0.00
C&F
2010-01-08
UM 23.40.11057
6 ZINSER SECOND HAND SPINNING MACHINES DESIGNED as RING SPINNING FRAMES MODEL 320 SL each with 760 SPINDLES-SPINDLE GAUGE 75 MM-RING Ø 42/48 MM-TUBE LENGTH 250 MM with COWEMAT-YEAR of CONSTRUCTION 1989/90
0.00
EURO
ex mill floor
2010-01-07
UM 23.41.10813
2 SCHLAFHORST SECOND HAND SPINNING MACHINES DESIGNED as OPEN- END SPINNING FRAMES MODEL AUTOCORO AC SRZ with 288 ROTORS EACH-SPIN BOX model SE 11-COROLAB 7-2 ROBOTS-SPLICERS-YEAR of CONSTRUCTION 1999
0.00
EURO
ex mill floor
2010-01-06
UM 24.46.11053
2 SSM SECOND HAND WINDING MACHINES DESIGNED as PRECISION ASSAMBLE WINDERS MODEL PW-1 PRECIFLEX & DP-1-D PRECIFLEX with 36 and 15 HEADS-TUBES 230 and 270 MM-YEAR of CONSTRUCTION 2002 and 1999
0.00
EURO
ex mill floor
2010-01-06
UM 46.225.11054
1 TAJIMA SECOND HAND COMPLETE EMBROIDERY RANGE DESIGNED as MULTI HEAD EMBROIDERY MACHINE MODEL TMFD-G1215 with 15 HEADS - 12 COLOURS - INTEGRADED DISC READER - FRAME and WINDER - YEAR of CONSTRUCTION 1998
0.00
- not spec -
2010-01-06
UM 22.36.10988
1 ZINSER SECOND HAND ROVING MACHINE MODEL FL 670 with 120 SPINDLES with DRAFTING SYSTEM SKF 4 over 4 - AUTOMATIC DOFFING - YEAR of CONSTRUCTION 2002
0.00
EURO
C&F
2010-01-05
UM 24.46.11011
2 MURATA SECOND HAND COMPLETE WINDING MACHINES DESIGNED as AUTOMATIC CONE WINDERS MODEL 7-II & 7-V each with 60 WINDING POSITIONS-TRANSPORT BELT-WAXING DEVICE-LOEPFE CLEARERS-DOUBLE FEEDING-YEAR of CONSTRUCTION 1990 and 1998
0.00
EURO
C&F
2009-12-21
UM 24.46.11048
1 MTH SECOND HAND WINDING AUTOMATE DESIGNED as ASSEMBLY WINDER MODEL RCR 15 with 48 POSITIONES DOUBLE SIDED-INSIDE FEEDING CREEL and METER COUNTER PER each POSITION-YEAR of CONSTRUCTION 1996
0.00
- not spec -
2009-12-21
UM 22.36.10824
2 NSC SCHLUMBERGER different FLYERS DESIGNED as VERTICAL ROVING FRAMES MODELS FMV 30 and FMV 32 with 12/16 HEADS-24 ENDS PER HEAD-RUBBING ZONE-ELECTRONIC STOP etc YEAR of CONSTRUCTION 1984/88
0.00
FOT
2009-12-17
UM 22.39.11043
2 NSC SCHLUMBERGER SECOND HAND DIFFERENT PREPARATION LINES DESIGNED as CHAIN GILLS ONE as AUTOLEVVELER GILL & ONE as THIRD PASSAGE MODEL GC 14 with 6/8 END TOP TABLE CREEL-DUST CABINET-AUTOMATIC DOFFING-YEAR of CONSTRUCTION 1991 and 1993
0.00
FOT
2009-12-17
UM 27.60.11045
1 NUOVO PIGNONE SECOND HAND WEAVING MACHINE DESIGNED as RAPIER LOOM MODEL FAST T-WORKING WIDTH 1900 MM-8 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2668 with 20 LEVERS-YEAR of CONSTRUCTION 1999
0.00
EURO
FOT
2009-12-17
UM 34.107.11038
1 COMET SECOND HAND MECHANICAL FINISHING LINE DESIGNED as COMBINED POLISHING - and SHEARING MACHINE MODEL 128/C-WORKING WIDTH 2000 MM with HEATED POLISHING ROLLER by 18 INTERCHANGEABLE ELECTRIC RESITANCES-ONE SHEARING ROLLER with 20 BLADES-YEAR 1994
0.00
EURO
FOT
2009-12-15
UM 22.36.11044
1 NSC SCHLUMBERGER SECOND HAND ROVING FRAME DESIGNED as VERTICAL FINISHING FLYER MODEL FMV 32 with 16 SPINDLES-2 ENDS per BOBBIN-AUTOMATIC DOFFING-FREQUENCY INVERTER DRIVE-YEAR of CONSTRUCTION 1988
0.00
- not spec -
2009-12-15
UM 34.98.11034
1 BRÜCKNER SECOND HAND SINGLE LAYER STENTER DESIGNED for WOVENS and KNITTED GOODS-WORKING WIDTH 2100 MM with FINISHING FOULAR-MAHLO WEFT STRAIGHTNER-VERTICAL RETURN PIN CHAIN-6 CHAMBERS THERMAL OIL HEATED-PLAITER-YEAR of CONSTRUCTION 1993
0.00
- not spec -
2009-12-11
UM 34.202.11035
1 TUBETEX SECOND HAND COMPACTING MACHINE DESIGNED as OPEN WIDTH COMPACTOR MODEL C 2000-WORKING WIDTH 2200 MM with FABRIC EXPANDERS-WEFT STRAIGHTENER-COMPACTOR-STEAM and/or OIL HEATED-WEFT STRAIGHTNER-OIL BOILER-YEAR of CONSTRUCTION 1993
0.00
- not spec -
2009-12-11
UM 36.129.10836
1 STORK SECOND HAND PRINTING MACHINE DESIGNED as ROTATION FILM SCREEN PRINTER MODEL DD-PRINTING WIDTH 1620 MM with 10 COLOURS INSTALLED-REPEAT 640 - 1020 MM with DRYER STEAM HEATED-4 SECTIONS-3 PASSAGES-YEAR of CONSTRUCTION 1995
0.00
EURO
FOT
2009-12-10
UM 27.62.11030
6 SULZER RÜTI SECOND HAND WEAVING MACHINES DESIGNED as AIR JET LOOMS for GLASSILK WEAVE MODEL L 5100 - WORKING WIDTH 1700 MM-SINGLE COLOUR with ELECTRONIC DOUBLE TE-STARKE THREAD FEEDING DEVICE-YEAR of CONSTRUCTION 1989
0.00
ex mill floor
2009-12-10
UM 26.58.10736
1 BENNINGER SECOND HAND WARPING PLANT DESIGNED as SECTIONAL WARPING MACHINE MODEL SUPERTRONIC-WORKING WIDTH 2200 MM-DESIGNED for BEAM Ø 1000 MM with AUTOMATIC DOFFING-WAXING MOTION-PROMATIC AND creel 512 YARNS and TENSIONER-YEAR of CONSTRUCTION 1992
0.00
EURO
FOT
2009-12-09
UM 26.58.10890
1 GA.MA.TEX SECOND HAND WARPING LINE DESIGNED as SECTIONAL WARPER MODEL G 405-WORKING WIDTH 2200 MM and DESIGNED for BEAMS of FLANGES Ø 1000 MM with WAXING-BEAMER and CREEL with 480 ENDS plus 480 SPARE-GAUGE 240 MM-YEAR of CONSTRUCTION 1995
0.00
EURO
FOT
2009-12-09
UM 26.58.11026
2 KARL MAYER SECOND HAND WARPING PLANTS DESIGNED as SECTIONAL WARPERS MODEL ECON-O-MATIC-WORKING WIDTH 2250 MM with BEAMER DESIGNED for BEAM FLANGES Ø 1000 MM-WAXING with CREEL 252 YARNS with KNOTTER-YEAR of CONSTRUCTION 2001 and 2002
0.00
EURO
ex mill floor
2009-12-09
UM 26.58.10787
1 SUZUKI SECOND HAND COMPLETE WARPING PLANT DESIGNED as SAMPLE WARPER MODEL NAS-130 Super-WORKING WIDTH 2000 MM with HIGH SPEED COLOUR SELECTOR of 10 COLOURS with CREEL-8 WEFT FEEDERS-ROTARY CREEL with 8 CCUMULATORS-ANTI-TWO-DIRECT BEAMING-YEAR 1995
0.00
EURO
FOT
2009-12-08
UM 26.58.10788
1 KARL MAYER SECOND HAND WARPING PLANT DESIGNED as SAMPLE WARPER MODEL ROM-2-WORKING WIDTH 2000 MM with STANDARD CRELL of 14 COLOURS and ROTARY CREEL of 12 COLOURS-DOUBLE BEAMER-YEAR of CONSTRUCTION 2000
0.00
EURO
FOT
2009-12-08
UM 35.200.11024
1 THEN & KRANTZ SECOND HAND DYE LINE DESIGNED for HIGH TEMPERATURE YARN DYEING with 1 DYE VESSEL 225 BOBBINS-THEN HIGH PRESSURE DRYER-1 VESSEL 56/72 BOBBINS and ONE KRANTZ HIGH PRESSURE DRYER-YERA of CONSTRUCTION between 1985 and 2000
0.00
EURO
ex mill floor
2009-12-08
UM 26.58.10891
1 GIOVANNELLI SECOND HAND COMPLETE WARPING RANGE DESIGNED as SECTIONAL WARPER MODEL COMPACTRONIC 2000-WORKING WIDTH 2600 MM and DESIGNED for BEAM FLANGES Ø 1000 MM with WAXING-PRESSING CYLINDER-ANTISTATIC MOTION and BENNINGER CREEL of 782 YARNS-YEAR 2003
0.00
EURO
FOT
2009-12-07
UM 41.153.11021
1 KÜSTERS SECOND HAND PADDING MACHINE DESIGNED as 2-BOWL FINISHING FOULAR MODEL 222.58.180 - WORKING WIDTH 1800 MM -2 BOWLS with CHEMICAL TROGH - YEAR of CONSTRUCTION 1996
0.00
EURO
ex mill floor
2009-12-07
UM 34.134.11008
1 OSTHOFF SECOND HAND SINGEING PLANT-WORKING WIDTH 1800 MM with BRUSHING UNIT-DOUBLE BURNER SINGEING-WASHING BOX-FINISHING FOULARD at EXIT-BIG BATCH WINDER-YEAR of CONSTRUCTION 1983
0.00
- not spec -
2009-12-02
UM 27.60.10806
19 VAMATEX SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL LEONARDO-WORKING WIDTH 2100 MM - 8 COLOURS - ELECTRONIC FIMTESSILE DOBBY DESIGNED for 26 SHAFTS - YEAR of CONSTRUCTION between 1999 - 2006
0.00
EURO
C&F
2009-12-01
UM 34.101.11003
1 FAMATEX SECOND HAND SINGLE LAYER STENTER-WORKING WIDTH 4200 MM with BETA FOULARD-MAHLO WEFT STRAIGHTNER-HORIZONTAL RETURN CLIP CHAIN-6 CHAMBERS STEAM HEATED-YEAR of CONSTRUCTION 1970
0.00
EURO
ex mill floor
2009-12-01
UM 24.333.11004
1 G+W SECOND HAND WINDING MACHINE DESIGNED as BALLING MACHINE MODEL 206 with 20 BALLING SPINDLES DESIGNED for 50 and 100 g BALLS-AUTOMATIC DOFFING-AUTOMATIC LABELING with LINKED YARN STEAMER-YEAR of CONSTRUCTION 1985
0.00
EURO
ex mill floor
2009-12-01
UM 34.108.10055
1 ANGLADA TURBANG SECOND HAND DRYING MACHINE DESIGNED as DRYING- SOFTENING PLANT MODEL DUPLEX TCR 1,8 SIMPLEX -WORKING WIDTH 1800 MM with SINGLE CHAMBER DIRECT GAS HEATED-COMPACTING ROTORS-OVERFEEDING DEVICE at EXIT-YEAR of CONSTRUCTION 1999
0.00
EURO
ex work
2009-11-26
UM 22.35.10996
9 RIETER SECOND HAND DIFFERENT DRAWING MACHINES MODELS SB 951 & SB D15 with CAN CREEL - ONE DELIVERY into CAN - YEAR of CONSTRUCTION 1994/95 and 2002
0.00
- not spec -
2009-11-26
UM 22.39.10975
1 NSC SCHLUMBERGER SECOND HAND GILL DESIGNED as AUTOLEVELLER CHAIN GILL MODEL GC 14 with 6 END TABLE TOP CAN CREEL - OUT RIGGERS and DUST CABINET - AUTOMATIC DOFFING - YEAR of CONSTRUCTION 1991
0.00
FOT
2009-11-25
UM 22.39.10992
1 NSC SCHLUMBERGER SECOND HAND GILL DESIGNED as AUTOLEVVELER CHAIN GILL MODEL GC 13 with 8- END TABLE TOP CAN CREEL - OUT RIGGERS - AUTOMATIC DOFFING - YEAR of CONSTRUCTION 1989
0.00
FOT
2009-11-25
UM 25.154.10993
1 RIETER & TRÜTZSCHLER SECOND HAND COMPLETE SPINNING LINE DESIGNED as ROTOR SPINNING PLANT of 1'500 ROTORS consisting 1 COMPLETE BLOW ROOM by TRÜTZSCHLER-8 CARDS of DK903-RIETER COMBING CABINET-5 SPINNING FRAMES R40-year of CONSTRUCTION 1990-2004
0.00
- not spec -
2009-11-25
UM 27.60.10978
24 DORNIER SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL GTN 4/SD - NOMINAL WIDTH 1900 MM - 4 COLOURS with STÄUBLI MECHANICAL DOBBY MODEL 2232 with 20 SHAFTS-YEAR of CONSTRUCTION 1986/87
0.00
EURO
C&F
2009-11-24
UM 24.46.10990
1 RITE SECOND HAND WINDING MACHINE DESIGNED as ASSEMBLY WINDER with 20 WINDING POSITIONS SINGLE SIDED - 3-PLY CREEL INSIDE - AUTOMATIC CONE CHANGE - YEAR of CONSTRUCTION 2004
0.00
EURO
FOT
2009-11-24
UM 22.39.10809
1 NSC SCHLUMBERGER SECOND HAND COMPLETE LONG STAPLE FIBER PREPARATION LINE DESIGNED as CHAIN GILL THIRD PASSAGE MODEL GC 14 with 270 MM WIDE HEAD-8 END TABLE TOP CAN CREEL- DUST CABINET and FALLERS-YEAR of CONSTRUCTION 1993
0.00
FOT
2009-11-20
UM 36.231.10920
1 CST SECOND HAND COMPLETE INK JET SCREEN ENGRAVING UNIT with CAD and ALL NECESSARY ACCESSORIES - WORKING WIDTH 3500 MM - YEAR of CONSTRUCTION 2002
0.00
EURO
ex mill floor
2009-11-20
UM 22.345.10983
1 LOPTEX SECOND HAND FOREIGN DETECTOR MODEL SORTER for POLIPROPILINE DETECTOR - YEAR of CONSTRUCTION 2004
0.00
- not spec -
2009-11-20
UM 25.57.10927
1 TEMAFA & ZINESER SECOND HAND COMPLETE SPINNING PLANT DESIGNED as WORSTEDT RING SPINNG and ROTOR SPINNING LINE LINKED with a SAURER TWISTING PLANT with TEMAFA BLOW ROOM SCHLUMBERGER INTERSECTING-ZINSER RING SPINNING & RIETERO.E. SPIN FRAMES-YEAR 1981/95
0.00
EURO
ex mill floor
2009-11-19
UM 27.60.10979
24 DORNIER SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL HTN 4/SD - NOMINAL WIDTH 1900 MM- 4 COLOURS with STÄUBLI MECHANICAL DOBBY MODEL 2237 - YEAR of CONSTRUCTION 1988
0.00
EURO
C&F
2009-11-19
UM 22.32.10973
5 MARZOLI SECOND HAND DIFFERENT BALE PLUCKER MODEL B 12/E and B 12 SM - PLUCKER LENGHT 1700 MM/2300 MM - BELT LENGHT 25 and 28 METERS - YEAR of CONSTRUCTION 1988/1998
0.00
- not spec -
2009-11-18
UM 22.32.10974
2 RIETER SECOND HAND DIFFERENT BALE PLUCKERS MODEL UNIFLOC A 1/2 and UNIFLOC A 11 - PLUCKER WIDTH 2300 MM - BELT LENGHT 30 METER - YEAR of CONSTRUCTION 1988 and 1999
0.00
- not spec -
2009-11-18
UM 34.186.10961
1 LECTRA SECOND HAND CUTTING MACHINE DESIGNED as CAM CUTTING MACHINE MODEL VECTOR 700 V2 - CUTTING TABLE 1800 MM with OSCILLATING KNIFE HEAD - CUTTING HIGHT 70 MM - AUTOMATIC ROLL DRIVE - YEAR of CONSTRUCTION 2000
0.00
EURO
ex mill floor
2009-11-13
UM 32.328.10860
1 STOLL RIMACH SECOND HAND COMPLETE KNITTING PLANT DESIGNED as CIRCULAR KNITTING RANGE with 7 sets STOLL MODEL CMS 422 TC GAUGE 12/8 - 6 sets RIMACH GAUGE 7/5 - COMPUTER STOLL SIRIX and SEWING DEPARTMENT - YEAR of CONSTRUCTION 1999/2000
0.00
EURO
ex mill floor
2009-11-12
UM 27.61.10953
27 SULZER RÜTI SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS for WIDER WIDTH SYNTECTICS WEAVE MODEK P7150 S460 N1 EP-WORKING WIDTH 4600 MM - SINGLE BEAMS - SINGLE COLOUR - CAM MOTION - 6 SHAFTS - YEAR of CONSTRUCTION 2002
0.00
EURO
ex mill floor
2009-11-10
UM 22.344.10948
1 LAROCHE SECOND HAND COMPLETE WASTE RECYCLING PLANT DESIGNED for CLEANING and RE-USING of COTTON FIBERS with FEEDING CONVEYOR-FIBER OPENER-CLEANERS-FINE OPENERS-BALLING PRESSES-YEAR of CONSTRUCTION 1980
0.00
EURO
ex mill floor
2009-11-09
UM 27.60.10931
20 PICANOL SECOND HAND WEAVING MACHINES DESIGNED as RAPIER WEAVING FRAMES MODEL GAMMA 6 R T 190-WORKING WIDTH 1900 MM-6 COLOURS with STÄUBLI ELECTRONIC DOBBY MODEL 2670 with 16 SHAFTS-YEAR of CONSTRUCTION 1997/98
0.00
C&F
2009-11-03
UM 35.90.10498
3 LAIP different SECOND HAND DYEING MACHINES DESIGNED as HIGH TEMPERATURE SOFT FLOW DYE APPARATUSES MODELS 600/2 and 400/3 - CAPACITY each MACHINE TOTAL 200-240 KG-2/3 ROPES-MICROPROCESSOR TERMOELETTRONICA-YEAR of CONSTRUCTION 1991
0.00
- not spec -
2009-10-30
UM 34.99.10834
1 BABCOCK SECOND HAND SINGLE LAYER STENTER DESIGNED for WOVENS and KINITTED GOODS MODEL BTM 5300-WORKING WIDTH 1800 MM with WASHING BOX - HORIZONTAL RETURN PIN CHAIN - 10 CHAMBERS DIRECT GAS HEATED and DASY TEX CONTROL SYSTEM - YEAR of CONSTRUCTION 1992
0.00
EURO
ex mill floor
2009-10-30
UM 35.86.10922
1 CIMI SECOND HAND COMPLETE WET FINISHING RANGE DESIGNED as WASHING PLANT-WORKING WIDTH 1800 MM with ENTRY-TREATMENT TANK-TWO DOUBLE WASHING TANK MODUL-THERMAL SHOCK TANK-BIG BATCH WINDER and ENDLESS PLAITING-YEAR of CONSTRUCTION 1993/2000
0.00
- not spec -
2009-10-30
UM 23.41.10923
1 RIETER SECOND HAND COMPLETE SPINNING MACHINE DESIGNED as OPEN- END SPINNING FRAME MODEL R-20 with 280 ROTORS - COMBER type OB-20 B - CLEARER by USTER MODEL MKC 15/2 - 2 ROBOTS - YEAR of CONSTRUCTION 1997
0.00
EURO
C&F
2009-10-30
UM 35.90.10924
1 MCS SECOND HAND COMPLETE DYEING AUTOMATE DESIGNED as HIGH TEMPERATURE SOFT FLOW DYE MACHINE MODEL SF 100 4S 54 HT with FOUR ROPES - NOMINAL CAPACITY 520/600 KG with LAN TERMOELECTRONICA CT 301 LAN PROGRAM CONTROLLER-YEAR of CONSTRUCTION 1997
0.00
EURO
ex mill floor
2009-10-30
UM 35.196.10925
6 THIES SECOND HAND DIFFERENT DYE AUTOAMTES DESIGNED as JET DYEING MACHINES MODEL ROTOSTREAM with CAPACITIES 240 KG, 120 KG, 480 and 360 KG - ROPES HIGH TEMPERATURE with EAS PROGRAM CONTROLLER MODEL PM - 1000 - YEAR of CONSTRUCTION between 1989 and 1995
0.00
EURO
ex mill floor
2009-10-30
UM 27.61.10877
6 SULZER RÜTI SECOND HAND WEAVING MACHINES DESIGNED as PROJECTILE LOOMS for WIDER WIDTH COTTON WEAVING MODEL P7100 B460 N1-1 EP R-REINFORCED-WORKING WIDTH 4600 MM-SPLIT BEAM ARRANGEMENT-WEFT MIXER with CAM MOTION E10 with 6 LEVERS-YEAR 1989 approx.
0.00
EURO
C&F
2009-10-29
UM 26.58.10884
1 KARL MAYER SECOND HAND WARPING PLANT DESIGNED as DIRECT WARPER MODEL ZM 2000/800 - WORKING WIDTH 1800 MM and DESIGNED for WARP BEAMS FLANGES Ø 800 MM with CREEL 910 YARNS and WINDER for DYE BEAMS-YEAR of CONSTRUCTION 1988
0.00
EURO
FOT
2009-10-29
UM 28.296.10918
24 BIG BATCH WINDERS MADE by MM MASCHINENBAU MENGEN MODEL SW 500 S - WORKING WIDTH 2200 MM - YEAR of CONSTRUCTION 1998
0.00
- not spec -
2009-10-29
UM 35.156.10910
1 GALVANIN SECOND HAND COMPLETE DYEING UNIT COMPOSED with 2 sets RPV50; 1 x RPV100 & 1 x RPV200 DESIGNED as VERTICAL AUTOCLAVE PACKAGE DYEING UNIT with HYDROEXTRACTOR, HYDRAULIV PRESSE and 2-CHAMBER PACKAGE DRYER-YEAR of CONSTRUCTION 1996
0.00
- not spec -
2009-10-28
UM 34.99.10914
1 BRÜCKNER SECOND HAND SINGLE LAYER STENTER DESIGNED for WOVENS MODEL VN 20/6-WORKING WIDTH 2000 MM with 2-BOWL FINISHING FOULARD-VERTICAL RETURN PIN CHAIN-6 CHAMBERS DIRECT GAS HEATED-BIG BATCH WINDER-YEAR of CONSTRUCTION 1975/1986
0.00
EURO
ex mill floor
2009-10-28
UM 23.41.10434
1 SCHLAFHORST SECOND HAND SPINNING MACHINE DESIGNED as ROTOR SPINNING FRAME MODEL ACO 288 with 198 ROTORS-ROTOR Ø 40 MM-SPIN BOX SE-11 COROLAB-COTTON BREAKER-YEAR of CONSTRUCTION 1999
0.00
EURO
- not spec -
2009-09-25
UM 34.99.10835
1 STENTEX SECOND HAND SINGLE LAYER STENTER DESIGNED for WOVENS MODEL STENTOTHERM 3300-WORKING WIDTH 1800 MM with 2 sets 2-BOWL FOULARD-MAHLO WEFT STRAIGTHENER-HORIZONTAL PIN CHAIN-9 CHAMBERS DIRECT GAS HEATED-BIG BATCHER-YEAR of CONSTRUCTION 1996
0.00
- not spec -
2009-09-25
UM 26.343.10854
1 MURATA SECOND HAND WINDING MACHINE DESIGNED as AUTOMATIC CONE WINDER MODEL 7-II MACH-CONER with 16 POSITIONS-INDIVIDUAL MOTORS-WORKING from CONE to CONE-AUTOMATIC DOFFING-ELECTRONIC CLEARERS PEYER PI550-YEAR of CONSTRUCTION 1991
0.00
- not spec -
2009-09-25
UM 34.98.9906
1 SANTA LUCIA second hand SINGLE LAYER STENTER DESIGNED for WOVENS and KNITTED GOODS model RED V7 200-WORKING WIDTH 2000 MM consisting BETA 3-BOWL FINISHING FOULARD-BIANCO WEFT STRAIGHTNER-STEAMER-VERTICAL PIN CHAIN-7 CHAMBERS THERMAL OIL HEATED-1999
0.00
EURO
C&F
2009-09-24
UM 31.141.10438
2 TERROT SECOND HAND KNITTING MACHINES DESIGNED as CIRCULAR JACQUARD KNITTERS MODEL MK7-CYLINDER Ø 30 inch-48 SYSTEMS-GAUGE E48-2 NEEDLE BARS with ELECTRONIC NEEDLE SENORS-ELASTIC DOFFING-PREDISPOSED for LYCRA-YEAR of CONSTRUCTION 1997 and 1998
0.00
EURO
FOT
2009-09-23
UM 46.224.10883
1 TAJIMA SECOND HAND COMPLETE EMBROIDERY FULLY COMPUTERISED with 1 x MODEL TEHX - C 1501, SINGLE FREE HEAD, EMBRODERY FIELD 360 x 520 mm-1 x MODEL TFHX - IIC, TWO HEADS; FREE ARM, 450 x 500 MM-SIERRA EMBRODERY SOFTWARE-YEAR of CONSTRUCTION 2002
0.00
EURO
ex mill floor
2009-09-23
UM 34.134.10893
1 FITE SECOND HAND SINGEING MACHINE MODEL FS CARBOMATIC-ROLLER WIDTH 1900 MM with 2 BURNERS-GROOVED STRECHER CYLINDER-AUTOMATIC CENTERING-COOLING DEVICE-YEAR of CONSTRUCTION 1990
0.00
EURO
ex mill floor
2009-09-21
UM 34.241.10766
2 KD BIELLA SECOND HAND DECATISING PLANTS TMT MODEL PF 2000 with MULTIPROGRAM with STAINLESS STEEL AUTOCLAVE Ø 1500 MM-3 DECATISING CYLINDERS each Ø 500 MM-WRAPPERS-COOLING DEVICE-YEAR of CONSTRUCTION 1998 and 1996
0.00
EURO
C&F
2009-09-18
UM 24.183.10461
1 LEZZENI & RPR SECOND HAND COMPLETE TWISTING LINE DESIGNED as TWO FOR ONE TWISTING- and FIXING INSTALLATION for FILAMENT YARNS with 2 x COPSWINDING-9 TWISTERS of 2'484 POSITIONS TOTAL-YARN STEAMING-YEAR of CONSTRUCTION 1999/2004
0.00
EURO
ex mill floor
2009-09-16
UM 42.169.10490
1 DR.FEHRER SECOND HAND NEEDLING MACHINE DESIGNED as NEEDLE LOOM for VELOUR FABRICS MODEL NL21/RV - WORKING WIDTH 2400 MM - 15'000 NEEDLES per METER - STROKE 60 MM - 1 NEEDLE BOARD plus 2 SPARE - YEAR of CONSTRUCTION 1990
0.00
EURO
FOT
2009-09-15
UM 30.336.10378
1 COMEZ SECOND HAND CROCHET MACHINE DESIGNED for RIGID or ELEASTIC LACES and BANDS MODEL 407 - GAUGE 15 NEEDLES/INCH - 234 NEEDLES GROOVES with CREEL 288 BOBBINS - ELECTRONIC SPEED VARIATOR - WINDER for RIBBONS - YEAR of CONSTRUCTION 1988
0.00
EURO
ex mill floor
2009-09-10
UM 30.336.10379
1 COMEZ SEOND HAND CROCHET MACHINE DESIGNED for JACQUARD CROCHET with ELECTRONIC SAMPLE PROGRAMMING MODEL 620/B FANTASY - 15 NEEDLES/INCH GAUGE - 360 NEEDLE GROOVES with CREEL 792 BOBBINS - TWO JACQUARD BARS - 10 MAGNETIC BANDS - YEAR of CONSTRUCTION 1989
0.00
EURO
ex mill floor
2009-09-10
UM 34.241.10452
1 BIELLA SECOND HAND-OVERHAULED- S.PROCESS PLANT MODEL MINIMAT 1040 H.Q with STAINLESS STEEL AUTOCLAVE Ø 1040 MM-2 stes PERFORATED DECATIZING CYLINDERS MADE in STAINLESS STEEL Ø 500 MM EACH-2 WRAPPERS-COOLING DEVICE-YEAR of CONSTRUCTION 1998
0.00
EURO
C&F
2009-09-08
UM 24.46.10843
1 SCHLAFHORST SECOND HAND WINDING MACHINE DESIGNED as AUTOMATIC CONE WINDER MODEL AUTOCONER AC 238 with 40 WINDING POSITIONS - AUTOMATIC DOFFING - USTER CLEANER MK-C30-AC 3 - YEAR of CONSTRUCTION 1997
0.00
EURO
ex mill floor
2009-09-07
UM 34.99.10865
1 BRÜCKNER SECOND HAND SINGLE LAYER STENTER DESIGNED for WOVENS MODEL HN-WORKING WIDTH 2000 MM with MENZEL UNWINDER-KÜSTERS FINISHING FOULARD-MAHLO WEFT STRAIGHTNER-HORIZONTAL COMBI CHAIN-7 CHAMBERS DIRECT GAS HEATED-YEAR of CONSTRUCTION 1984
0.00
EURO
ex mill floor
2009-09-04
UM 41.284.10866
1 MIT MISCHTECHNIK SECOND HAND PASTE MIXING STATION DESIGNED for COATING INDUSTRY MODEL DC-ELE-50 with STAINLESS STEEL TANK AND DISSOLVER SHAFT-MAX TANK CAPACITY 1300 l with VACCUM PUMP-YEAR of CONSTRUCTION 2000
0.00
EURO
ex mill floor
2009-09-04
UM 27.60.10859
14 NUOVO PIGNONE SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL FAST S-WORKING WIDTH 2200 MM-8 COLOUR SELECTOR with STÄUBLI ELECTRONIC DOBBY MODEL 2660 with 20 SHAFTS-YEAR of CONSTRUCTION 1996
0.00
EURO
C&F
2009-09-02
UM 24.69.10861
1 CHRISTIAN MAYER SECOND HAND PAPER CONE MAKING MACHINE for YARN WINDING MODEL D7400 TUBINGEN SVK-300 - CAPACITY between 82 000 and 86 000 PIECES - PAPER CONE ANGLE - YEAR of CONSTRUCTION 1985
0.00
C&F
2009-09-02
UM 22.35.10855
8 RIETER SECOND HAND DIFFERENT DRAWING FRAMES MODELS RSB D 30 with RIETER CONTROLS - AUTOMATIC DOFFING - CAN CHANGER - YEAR of CONSTRUCTION between 1998 and 2002
0.00
- not spec -
2009-08-28
UM 22.33.10811
1 NSC SCHLUMBERGER SECOND HAND CHAIN GILL DESIGNED as COMBER MODEL GC 13 with 10 CAN CREEL-DUST BOX-FALLERS-AUTOMATIC CAN CHANGE-CAN COMPACTOR-YEAR of CONSTRUCTION 1989
0.00
- not spec -
2009-08-27
UM 31.141.10852
1 MAYER & CIE SECOND HAND KNITTING MACHINE DESIGNED as CIRCULAR KNITTER MODEL MV 4 3.2 II - CYLINDER Ø 34 - GAUGE 36 - 108 SYSTEMS - MPF 1 /27 FEEDER - YEAR of CONSTRUCTION 2004
0.00
EURO
FCA
2009-08-27
UM 34.99.9921
1 BRÜCKNER SECOND HAND SINGLE LAYER STENTER DESIGNED for WOVENS-WORKING WIDTH 3000 MM with FLEISSNER WASHING MACHINE-SUCHY PRE-DRYER-KÜSTERS FINISHING FOULARD-HORIZONTAL return PIN CHAIN-MAHLO WEFT STRAIGHTNER-5 CHAMBERS GAS HEATED-MADE in 1979
0.00
EURO
ex mill floor
2009-08-26
UM 27.60.10845
19 DORNIER SECOND HAND WEAVING MACHINES DESIGNED as RAPIER LOOMS MODEL GTN 8/SD-NOMINAL WIDTH 2100 MM-8 COLOURS-STÄUBLI MECHANICAL DOBBY MODEL 2430 DESIGNED for 28 LEVERS ROTARY-UPPER BEAM DEVICE-YEAR of CONSTRUCTION 1980
0.00
EURO
C&F
2009-08-21
UM 24.342.10838
1 CROON & LUCKE SECOND HAND LINKED YARN STEAMING RANGE DESIGNED for STEAMING and SHRINKING for YARN NM 0,4 - 12 MODEL DF 1000 with 10 CONVEYORS for 10 ENDS-ELECTRIC HEATING-OUT STANDING CREEL for 10 plus 10 CONES LINKED with 2 CAKE WINDERS-YEAR 1986/88
0.00
EURO
ex mill floor
2009-08-14
UM 22.310.8891
1 SCHLUMBERGER second hand RE-BREAKER model GC 13R 5L 10 with 5 - ROLLER BREAKING ZONE, CHAIN GILL HEAD type GC 13, 40 END TABLE TOP CAN CREEL, DUST BOX, CHANGE WHEELS, delivery 1 sliver can size 1000 x 1200, AUTOMATIC DOFFING, built in 1988 year
0.00
£
FOT
2009-08-05
UM 26.170.10822
1 KARL MAYER SECOND HAND COMPLETE WEAVING PREPARATION LINE WIDTH 1800 MM with SIZING RANGE type ELCOTENS-BENNINGER DIRECT WARPER of BEN-DIRECT ZS 1250-THIES WARP BLEACHING RANGE ECO-BLOC-YEAR of CONSTRUCTION 2001 and 1993
0.00
EURO
ex mill floor
2009-08-05
UM 38.298.10820
1 MAINO SECOND HAND FINISHING LINE DESIGNED for PIECES DENIM PROCESSING with 11 WASHING MACHINES-DRYERS-7 x DYEING UNITS-SANDING and LASER-YEAR of CONSTRUCTION 1993/96
0.00
- not spec -
2009-08-04
UM 34.99.10723
1 BRÜCKNER SECOND HAND SINGLE LAYER STENTER DESIGNED for WOVENS and KNITTED GOODS-WORKING WIDTH 2400 MM with 2-BOWL FINISHING FOULARD of 2000MM WORKING WIDTH-MAHLO WEFT STRAIGHTNER-VERTICAL PIN CHAIN-7 CHAMBERS direct GAS HEATED-YEAR of CONSTRUCTION 1989
0.00
EURO
ex mill floor
2009-07-30
UM 25.119.10816
1 MACKIE SECOND HAND COMPLETE RING SPINNING LINE DESIGNED for HIGH QUALITY LINEN YARNS of 1'056 SPINDLES-PARTIAL UNUSED with 10 sets SLIVER DRAWING FRAMES with SPINNING CANS and 2 sets SPINNING FRAMES of MACK V and SCHLAFHORST WINDER-YEAR between 1994/99
0.00
EURO
ex mill floor
2009-07-30
UM 22.32.10815
1 TRÜTZSCHLER/HERGETH SECOND HAND COMPLETE BLOW ROOM with MINIFLOCS-PART SPEPARATOR-CLEANERS-BLENDER-DUSTEX-YEAR of CONSTRUCTION 1982,1991/2005
0.00
EURO
ex mill floor
2009-07-29
UM 41.297.10812
ALL KINDS of NEW ONNEEDLING RING and AFTERNEEDLING RINGS of Ø 220/150 mm (BRÜCKNER STENTER) 220/178 mm (MONFORTS) and 178 mm (STENTEX) and PIN CHAIN LIMBS of 36 or 43 LIMBS AVAILABLE-YEAR of MANUFACTUR on ORDER
0.00
EURO
ex work
2009-07-28
UM 30.336.10776
1 COMEZ SECOND HAND CROCHET MACHINE MODEL 408 - WORKING WIDTH 500 MM POSITIVE RUBBER GUILDILINE - ADJUSTED PITCH 10 - YEAR of CONSTRUCTION 1991
0.00
EURO
ex mill floor
2009-07-24
UM 30.336.10777
2 JAKOB MÜLLER SECOND HAND CROCHET MACHINES MODEL RD 3 - WORKING WIDTH 500 and 800 MM with ELECTRONIC WEFT BAR CONTROL - POSITIVE RUBBE GUIDELINE - CURRENTLY ADJUSTED PITCH 8 - YEAR of CONSTRUCTION 1991 and 1994
0.00
EURO
ex mill floor
2009-07-24
UM 34.241.10808
1 KD BIELLA SECOND HAND DECATISING MACHINE DESIGNED as SHRUNK PROCESS MODEL CADET 1150 H.Q. with STAINLESS STEEL AUTOCLAVE-3 DECATISING CYLINDERS-COOLING DEVICE-YEAR of CONSTRUCTION 1999
0.00
EURO
ex mill floor
2009-07-24
UM 34.263.10800
1 ERHARD and LEIMER SECOND HAND SODA APPLY MACHINE-WORKING WIDTH 1800 MM with DOGAL at INLET-2-BOWL FINISHING FOULARD with DOUBLE THROUGH and MIXER-FOLDER and BIG BATCH WINDER-YEAR of CONSTRUCTION 2007
0.00
EURO
ex mill floor
2009-07-21
UM 34.263.10801
1 STARMEC SECOND HAND EQUILISER MACHINE-WORKING WIDTH 1800 MM with MAHLO AUTOMATIC WEFT STAIGHTNER model RFMC-10-PIN CHAIN-STEAMER-DRYING DEVICE-BIG BATCH WINDER-YEAR of CONSTRUCTION 2007
0.00
FOT
2009-07-21
UM 34.122.10802
1 CIMI SECOND HAND STEAMING UNIT DESIGNED for YARN STEAMING DESIGNED for an CAPACITY of 2 TRUCKS 300 KG approx.-ELECTRICAL FEEDING-VACUUM STEAMING-CYCLE STEAMING- CLEANER-YEAR of CONSTRUCTION 1997
0.00
- not spec -
2009-07-21
UM 24.183.10803
1 SAVIO/RITE SECOND HAND COMPLETE TWISTING RANGE with 2 x TDS 15N-1 x TDS 212-1 x RITE model AGR-STEAMER-COMPRESSOR-YEAR of CONSTRUCTION 1984-1997
0.00
- not spec -
2009-07-21
UM 34.106.10791
2 LAFER SECOND HAND SHEARING PLANTS DESIGNED as SINGLE SHEARING MACHINES for WOVEN and KNITTED GOODS LINKED in TANDEM MODEL CMI-1-WORKING WIDTH 2200 MM with PNEUMATIC CENTERING-1 SHEARING ROLLER with 20 BLADES-1 VELVET CYLINDER-YEAR of CONSTRUCTION 2004
0.00
EURO
FOT
2009-07-16
UM 34.99.10793
1 MONFORTS SECOND HAND SINGLE LAYER STENTER DESIGNED for WOVENS- and KINTTED GOODS MODEL 14 G/K-WORKING WIDTH 2400 MM with FOULARD-WEFT STRAIGHTENER-PRE- DRYER-COMBI CHAIN-7 CHAMBERS direct GAS HEATED-YEAR of CONSTRUCTION 1988
0.00
- not spec -
2009-07-16
UM 41.277.10719
2 CALDERIA & CALOR SECOND HAND STEAM BOILERS - CAPACITY 4'500 KG STEAM per HOUR - PRESSURE 8 KG / CM² - MAX. TEMPERATURE 179 °C - YEAR of CONSTRUCTION 1995
0.00
EURO
ex mill floor
2009-07-14
UM 34.263.10785
2 BMM WESTON SECOND HAND FINISHING MACHINES DESIGNED as TUNNEL FINISHER for ALL TYPES of POLYESTER/COTTON and COTTON RICH GARMENTS MODEL 450 TUNNEL V5879 with HOT AIR/STEAM FINISHING TUNNEL - YEAR of CONSTRUCTION 2000 and 2001
0.00
- not spec -
2009-07-14
UM 42.192.10782
1 GUASCH & Dr. FEHRER SECOND HAND COMPLETE NON WOVEN LINE DESIGNED as NEEDLE PUNCHIN PLANT - WORKING WIDTH 2200 MM with PICKER FIBER OPENER-2 CARDS-CROSSLAPPER-PRE-NEEDLE and FINAL NEEDLE LOOM-YEAR of CONSTRUCTION 1989 approx
0.00
- not spec -
2009-07-13
UM 34.99.10564
1 SANTA LUCIA SECOND HAND MULTY LAYER STENTER DESIGNED for WOVEN FABRICS MODEL WHITE-WORKING WIDTH 2200 MM-5 LAYERS CONTAINS 75 METERS with BETA THREE-BOWL FOULARD-BIANCO WEFTSTRAIGTHNER-VERTICAL PIN CHAIN-YEAR of CONSTRUCTION 1999
0.00
- not spec -
2009-07-08
UM 22.36.10772
5 GROSSENHAINER SECOND HAND FLYER MODEL BF90-3R each with 120 POSITIONS - POT Ø 400 MM - DRAWING MODEL PK-1500 - TWIST RANGE 20 - 70-YEAR of CONSTRUCTION 1990-1994
0.00
- not spec -
2009-07-08
UM 34.99.10724
1 REGGIANI SECOND HAND SINGLE LAYER STNETER DESIGNED for WOVEN FABRICS MODEL TEMA 200/15-WORKING WIDTH 1850 MM with 2-BOWL FINISHING FOULARD-AUTOMATIC WEFT STRAIGHTNER-HORIZONTAL return PIN CHAIN-8 CHAMBERS direct GAS HEATED-YEAR of CONSTRUCTION 2003
0.00
EURO
ex mill floor
2009-07-07
UM 26.58.10765
1 KARL MAYER SECOND HAND WARPING MACHINE DESIGNED as SAMPLE WARPER MODEL ROM-WORKING WIDTH 2000 MM with STANDARD CREEL of 14 COLOURS-ANT-TWO SYSTEM-ROTATION CREEL for 8 COLOURS-INTERMEDIATE BEAMING MOTION-YEAR of CONSTRUCTION 1997
0.00
EURO
FOT
2009-07-03
UM 34.177.10624
1 LAFER SECOND HAND COMPLETE MECHANICAL FINISHING RANGE DESIGNED as COMBINED RAISING- and SHEARING PLANT - WORKING WIDTH 1900 MM with 1 DOUBLE DRUM RAISING UNIT, " SUPERIPOSED DRUMS with 24 ROLLERS with DOUBLE SHEARING with 2 VELVET CYLINDER-YEAR 2000
0.00
EURO
ex mill floor
2009-07-01
UM 34.99.10754
1 SABEN SECOND HAND SINGLE LAYER STENTER DESIGNED for WOVEN FABRICS-WORKING WIDTH 2000 MM with 3 PRE-DRYING CYLINDERS-VERTICAL RETURN PIN CHAIN-5 CHAMBERS DIRECT GAS HEATED-BIG BATCH WINDER-YEAR of CONSTRUCTION 1991
0.00
EURO
ex mill floor
2009-07-01
UM 24.46.10756
1 SAVIO SECOND HAND WINDING MACHINE DESIGNED as AUTOMATIC BACKWINDER MODEL ESPERO L with 40 WINDING POSITIONS with USTER CLEARERS-PEYER PINTER SYSTEM-AUTOMATIC DOFFING-CONE TAKE-UP-YEAR of CONSTRUCTION 1998
0.00
ex mill floor
2009-07-01
UM 24.46.10720
2 SAVIO SECOND HAND WINDING MACHINES DESIGNED as AUTOMATIC BACKWINDERS MODEL ESPERO with 56 WINDING POSITIONS EACH-TUBE 54 MM-KNOTTER-MESDAN type 410-AUTOMATIC DOFFING-YEAR of CONSTRUCTION 1998 and 1999
0.00
FOT
2009-06-29
UM 28.296.10748
3 ASCENDING SECOND HAND WINDERS DESIGNED as BATCHING WINDERS - WORKING WIDTH 2200 MM used at SULZER - MODEL SW 500 - DRIVE MAINTENCE - FREE - YEAR of CONSTRUCTION 1982
0.00
EURO
FCA
2009-06-26
UM 24.158.10515
1 USTER SECOND HAND TESTER TYPE 3 B/M with SIGNAL PROCESSOR-EVENESS CONVERTER-SENSORS-ABSORBER and CONVEYOR-YEAR of CONSTRUCTION 1993 approx.
0.00
EURO
ex mill floor
2009-06-25
UM 24.51.10598
1 LEZZENI FANTASIA SECOND HAND TWISTING MACHINE MODEL FTF/DBF 210 with 48 POSITIONS - DELIVERY to BOBBINS-DOUBLE DRAFT-BOBBINS and CAN CREEL with ONE WINDER MODEL SLV/R-YEAR of CONSTRUCTION 2004
0.00
EURO
ex mill floor
2009-06-25
UM 34.99.10745
1 SANTA'LUCIA SECOND HAND SINGLE LAYER STENTER DESIGNED for WOVEN FABRICS - WORKING WIDTH 2200 MM with STEAMER at ENTRY-KÜSTERS FINISHING FOULARD-MAHLO WEFT STRAIGHTNER-COATING DEVICE-VERTICAL PIN CHAIN-6 CHAMBERS GAS HEATED-YEAR of CONSTRUCTION 2001
0.00
EURO
ex mill floor
2009-06-24
UM 26.58.10415
1 RAMALLUMIN SECOND HAND WARPING MACHINE DESIGNED as DIRECT WARPING MACHINE - WORKING WIDTH 1800 MM-WAERP BEAM FLANGES Ø 1000 MM-TRUCKS CREEL with 756 YARNS - YARN STOP MOTION-YEAR of CONSTRUCTION 1993
0.00
EURO
FOT
2009-06-18
UM 22.288.10714
1 CERES LAROCHE SECOND HAND CLEANING LINE DESIGNED for WOOL with SILO FEEDING-PICKER BEATING OPENER-PARTICLES SEPARATOR-STEP CLEANER-YEAR of CONSTRUCTION 1987
0.00
- not spec -
2009-06-12
UM 41.277.10718
1 ANINGAS SECOND HAND DYATHERMIC OIL BOILER - CAPACITY 1'250'000 KCAL / HOUR - 1'453 kW - MAX. TEMPERATURE 410 °C - HEATED by GAS BURNER - YEAR of CONSTRUCTION 2001
0.00
EURO
ex mill floor
2009-06-12
UM 34.241.10711
1 BIELLA SECOND HAND PROCESSING RANGE DESIGNED as SHRUNK PROCESS DECATIZING MACHINE MODEL KD MINIMAT HQ 1040 - WORKING WIDTH 1700 MM with MAHLO WEFT STRAIGHTNER - REVOLVER- WINDING- and UNWINDING DEVICE - AUTOCLAVE Ø 1040 MM - YEAR of CONSTRUCTION 1996
0.00
EURO
ex mill floor
2009-06-11
UM 34.202.10120
1 MONFORTS SECOND HAND COMPACTING MACHINE DESIGNED as TUBULAR COMPACTOR MODEL MONTI-WORKING WIDTH 1300 MM-DOUBLE CYLINDERS ELECTRICAL HEATED-max. temperature 220 °C with 2 DRYING CHAMBERS STEAM HEATED-YEAR of CONSTRUCTION 1998
0.00
EURO
FOT
2009-06-02
UM 35.166.10693
1 MEZZERA SECOND HAND JIGGER MODEL VGJ - WORKING WIDTH 1800 MM-MAX. BATCH Ø 1250 MM - ELECTRONIC and CONTROLSYSTEM RENEWED in 2005 YEAR-YEAR of CONSTRUCTION 1995
0.00
EURO
ex mill floor
2009-05-29
UM 30.72.10685
14 KARL MAYER DIFFERENT SECOND HAND FLAT BED KNITTING MACHINES DESIGNED as RASCHEL MACHINES for CORTAINS -WORKING WIDTH 3300 MM-18/14 E-MODELS RJSG, RJC & MSW-YEAR of CONSTRUCTION between 1988 and 1995
0.00
EURO
ex mill floor
2009-05-27
UM 42.169.10463
2 ASSELIN SECOND HAND NEEDLE PUNCHING LOOMS MODELS SD 26 2E 02 & SM 26 2E 02-WORKING WIDTH 2600 MM - STROKE HIGHT 60 MM-8'532 NEEDLE DENSITY per LINEAR METER-4 HALF BOARDS-YEAR of CONSTRUCTION 1994 and 1993
0.00
- not spec -
2009-05-26
UM 27.61.10684
20 SULZER RÜTI SECOND HAND WEAVING MACHINES DESIGNED as PROJECTILE LOOMS for SYNTHETICS MODEL P7150 S390 N4 SP-WORKING WIDTH 3900 MM-SINGLE BEAM EXECUTION-4 COLOURS with ELECTRONIC DOBBY STÄUBLI MODEL 2665-16 LEVERS-YEAR of CONSTRUCTION 2000/2001
0.00
EURO
C&F
2009-05-26
UM 22.35.10447
3 RIETER SECOND HAND DRAWING MACHINES MODEL RSB 951 with 6 DOUBLINGS-AUTOLEVELLER-SINGLE DELIVERY-AUTOMATIC DOFFING-CAN SIZE 20 x 42-YEAR of CONSTRUCTION 1995
0.00
C&F
2009-05-20
UM 25.276.10673
1 LOT of SECOND HAND DIFFERENT SPINNING PREPARATION, SPINNING and WINDING- and TWISTING MACHINES DESIGNED for FANCY YARN of 5 x TWISTERS-3 x SPIN FRAMES-3 x GILLS and WINDER and STEAMER-YEAR of CONSTRUCTION between 1985-1991
0.00
- not spec -
2009-05-19
UM 35.237.10667
2 and 2 THEN SECOND HAND DYEING APPARATUS DESIGNED as BEAM DYEING AUTOCLAVES MODEL HST 120/20 & HST 155/20-WORKING WIDTH 2000 MM for BEAM Ø 400 MM-AUTOCLAVE Ø 1200/1550 MM-MAX. BATCH Ø 1000/1300 MM-YEAR of CONSTRUCTION 1988,1994/1997/98
0.00
EURO
ex mill floor
2009-05-14
UM 34.263.10236
1 BIANCALANI SECOND HAND SUPER PROCESSING MACHINE MODEL AIRO 1000 SPE with WET AND DRY SYSTEM with TWO CHANNELS-DUST RECOVERY and DUST COMPACTOR-CHEMICAL MIXING DEVICE eith TANK-STEAM HEATING SYSTEM-YEAR of CONSTRUCTION 1993
0.00
EURO
FOT
2009-05-12
UM 24.239.10658
1 TRÜTZSCHLER SECOND HAND LICKER-IN DEVICE DESIGNED for CARDING MACHINE type DK 803 with 2 WIRE WOUND ROLLS and 1 ROLL of PIN TYPE- REBUILT
0.00
ex mill floor
2009-05-12
UM 34.118.10660
1 SPEROTTO RIMAR SECOND HAND BRUSHING MACHINE MODEL SM6 - WORKING WIDTH 2000 MM with 6 BRAND NEW BRUSH/SUEDING UNITS-6 SPARE EMERY PAPER SUEDING ROLLERS-DANCING ROLLERS-YEAR of CONSTRUCTION 1995 approx.
0.00
EURO
C&F
2009-05-12
UM 34.202.10651
1 SANTEX SECOND HAND COMPACTOR DESIGNED for WOVENS and KNITTED GOODS MODEL SANTACOMPACT - WORKING WIDTH 2000 MM with ENTRY FRAME - LEVELLING STENTER-VERTICAL RETURN PIN CHAIN-WEFT STRAIGHTENER-STEAMER of 1000 MM-HEATING CYLINDER-DRYING & CUTTING-YEAR 2002
0.00
- not spec -
2009-05-08
UM 22.144.10488
1 NSC SCHLUMBERGER SECOND HAND PREPARATION INSTALLATION DESIGNED as VERTICAL FINISHER for DOING ROVING COUNT RANGE 0,66 to 4 Nm for WOOL and LONG STAPLE FIBERS MODEL FMV 32 with 16 BOBBINS-2 ENDS per BOBBIN-AUTOMATIC DOFFING-MAX. BOBBIN Ø 300 MM-YEAR 198
0.00
EURO
FOT
2009-05-07
UM 38.302.10644
1 STORK and ZIMMER SECOND HAND COMPLETE PRINTING- and FINISHING MILL with STORK made ROTARY PRINTER of 2250 M M WORKING WIDTH-ZIMMER ROTARY PRINTER of 2400 MM-1 STORK 1650 MM-SANTEX TUMBLER-CHEMICAL KITCHEN-YEAR of CONSTRUCTION 1990/98
0.00
- not spec -
2009-05-05
UM 22.146.10639
3 DELL'ORCO & VILLANI SECOND HAND MIXMASTER BELNDING BINS MODEL BF 4000x12-OUT of ZINKED STEEL SANDWICH PLATES-EMTIER with STRONG SPIKE LATICE and FEEDING by 4 CYCLONS-YEAR of CONSTRUCTION 1996/98
0.00
EURO
ex mill floor
2009-05-04
UM 35.87.10565
1 GOLLER SECOND HAND COMPLETE BLEACHING- and WASHING RANGE DESIGNED for OPEN WIDTH WOVEN FABRICS MODEL BW/DX-WORKING WIDTH 2000 MM with 2 x WASHING-IMPREGNATE UNIT-STEAMER-3 x WASH BOXES and CYLINDER DRYER-YEAR of CONSTRUCTION 1992
0.00
- not spec -
2009-04-29
UM 28.66.10631
1 KNOTTEX SECOND HAND KNOTTING MACHINE MODEL AS / 2 8122 EA 03 COMPLETE with KNOTTING FRAME of 2200 MM WIDTH - YEAR of CONSTRUCTION 2004
0.00
EURO
ex mill floor
2009-04-29
UM 25.253.9728
1 MACKIE second hand TAPE EXTRUSION LINE of DIAMETER 65 MM - AUTO SCREEN CHANGER - with CHILL ROLLER - FIBRILATOR plus DOWNSTREAM and TWO OVENS - MADE 1985 approx.
0.00
- not spec -
2009-04-24
UM 28.67.10620
1 ATLAS COPCO SECOND HAND COMPLETE AIR PLANT DESIGNED for 150 AIR JET LOOMS - CAPACITY 18'101 m³/h with DRYERS, FILTERS and SOFT WATER PREPARATION - YEAR of CONSTRUCTION UNKNOWN
0.00
EURO
ex mill floor
2009-04-23
UM 27.62.10616
7 DORNIER SECOND HAND WEAVING MACHINES DESIGNED as AIR JET LOOMS for JACQUARD WEAVING MODEL LWV 6/J-NOMINAL WIDTH 2500 MM-6 COLOURS with STÄUBLI ELECTRONIC JACQUARD MODEL CX880 with 1'408 HOOKS and JC4 CONTROLER-BATCHING-YEAR of CONSTRUCTION 1997
0.00
EURO
ex mill floor
2009-04-22
UM 35.91.10486
1 THEN SECOND HAND DYE APPARTUS DESIGNED as OVER FLOW HIGH TEMPERATURE DYE INSTALLATION for WOVEN and KINTTED GOODS MODEL HT 340 - CAPACITY 340 KG - TWO ROPES - max. temperature 152°C - SETEX AUTOMATIC DOSING SYSTEM- YEAR of CONSTRUCTION 2000
0.00
EURO
FOT
2009-04-17
UM 22.194.10606
1 TRÜTZSCHLER SECOND HAND MULTIMIXER MODEL MPM 10/6 - YEAR of CONSTRUCTION 2000
0.00
C&F
2009-04-16
UM 38.298.10578
1 SANTA'LUCIA & LAFER SECOND HAND COMPLETE FINISHING LINE DESIGNED for KNITTED GOODS-WORKING WIDTH 2200 MM with SINGLE LAYER STENTER with COMBI CHAIN and 3 CHAMBERS GAS HEATED-5 sets RAISING MACHINES SIKNGLE- and DOBLE-SHEARING RANGE-YEAR 1999/2001
0.00
EURO
ex mill floor
2009-04-15
UM 22.288.10573
1 MONDEJAR and SCHIRP SECOND HAND COMPLETE LINE for OPENING of HARD WASTES DESIGNED for ANY KIND of FIBERS COTTON, POLYESTER, ACRYLIC and WOOL with GUILLOTINE CUTTER and RAG TEARING-PULLING- and SHREDDER MACHINE-HARD WASTE OPENER-BALLING PRESS-YEAR 1987
0.00
EURO
C&F
2009-04-14
UM 34.106.9781
1 LAFER second hand SHEARING MACHINE DESIGNED as DOUBLE SUPERIMPOSED SHEARING MACHINE for OPEN WIDTH KNITTED GOODS MODEL CMS-2 -WORKING WIDTH 2400 MM -TWO SHEARING CYLINDERS each 20 BLADES - TORRES SELVEDGE PROTECTION TABLES -MADE in 1995 YEAR
0.00
EURO
C&F
2009-04-08
UM 27.62.10595
7 DORNIER SECOND HAND WEAVING MACHINES DESIGNED as AIR JET LOOMS in REINFORCED VERSION MODEL LWV/AWV 4/S12-NOMINAL WIDTH 3400 MM-SPLIT BEAM ARRANGEMENT-4 COLOURS-ELECTRONIC DOBBY STÄUBLI MODEL 2861 with 12/16 LEVERS-YEAR of CONSTRUCTION 1997/2003
0.00
ex mill floor
2009-04-06
UM 34.107.8083
1 COMET made POLISHING MACHINE model PRA 108, working width 1800 mm with ROLLS ACCUMULATOR DEVICE, IMPREGNATION UNIT with DEP CYLINDER and BRUSH, POLISHING with ELECTRIC HEAD RESISTANCES on CYLINDER, built in 1999 year
0.00
EURO
FOB
2009-04-03
UM 41.153.9591
1 FAMIT SECOND HAND PADDER DESIGNED as 2-BOWL FINISHING FOULARD in STAINLESS STEEL EXECUTION - WORKING WIDTH 2200 MM with DOUBLE TANKS for IMPREGNATION with STEAM HEATING - EXIT with FOLDER - YEAR of CONSTRUCTION 1999
0.00
EURO
ex mill floor
2009-04-03
UM 41.153.9641
1 KÜSTERS second hand FOULARD DESIGNED as DYEING FOULARD as SINGLE MACHINE model 222.11.180 WORKING WIDTH 1800 MM with ADJUSTABLE ENTRY FRAME, TWO WATER CIRCULATION COLLING BOWLS, FOUR CONTACT RUBBER CERED ROLLERS, TWO FLOATING SQUEEZERS BOWLS, 1995 year
0.00
EURO
ex work
2009-04-03
UM 36.112.8583
1 REGGIANI second hand FLAT BED PRINTING RANGE model REMBRANDT AVANT, printing width 1835 mm, 9 colours instralled with DRUM DRYER, AUTOMATIC DYE KITCHEN, BARREL and SCREEN WASHING MACHINES in STAINLESS STEEL EXECUTE and LABO-STEAMER,built in 1991/99 year
0.00
EURO
ex mill floor
2009-03-25
UM 41.222.10559
1 KÖRTING SECOND HAND CAUSTIC SODA REVOVERING DEVICE DESIGNED as CONTINUOUS RECOVERING of MERCERISING LYES enclosed THREE CAUSTIC SODA TANKS - YEAR of CONSTRUCTION UNKNOWN
0.00
EURO
ex mill floor
2009-03-18
UM 41.297.10451
ALL KIND of PIN PLATES for STENTER FRAMES each MODEL and PINNED ROLLERS-TOTAL 3'000 DIFFERENT TYPES-MADE in GERMANY-NEW
0.00
- not spec -
2009-03-16
UM 28.283.10554
43 IRO DIFFERENT SECOND HAND WEFT ACCUMULATORS TYPES IRO LUNA & IRO GALAXY with PLUG - ADDITIONAL 8 sets IRO CONTROL - YEAR of CONSTRUCTION UNKNOWN
0.00
ex mill floor
2009-03-11
UM 28.312.10545
58 GROB HORGEN AG SECOND HAND HELAD FRAMES TYPE GROBEXTRA ALFIX - WIDTH 1900 MM - 5,5 Nm with QUICKLY ATTACHMENT - YEAR of CONSTRUCTION UNKNOWN
0.00
- not spec -
2009-03-10
UM 35.91.10540
1 M.C.S. SECOND HAND DYEING MACHINE DESIGNED as OVERFLOW DYE APPARATUS MODEL SF 82 2-44 with TWO CHANNELS-CAPACITY TOTAL 200 KG with HEAT EXCANGER-FILTER-ADDITIONAL TANK-SWITH BOARD and PRGRAMMER-YEAR of CONSTRUCTION 1992
0.00
EURO
ex mill floor
2009-03-06
UM 35.91.10532
1 MINOX SECOND HAND DYEING MACHINE DESGNED as OVERFLOW DYE APPARATUS for WOOL and WOOL BLENDS MODEL FLOW SOFT PRS1C with ONE ROPE - CAPACITY 70 KG - PUMP - COMPUTER - YEAR of CONSTRUCTION 2000
0.00
EURO
ex mill floor
2009-03-03
UM 35.121.10521
1 SPEROTTO RIMAR SECOND HAND COMBINED SOLVENT-WATER CARBONISING RANGE MODEL 220-1000-1500WS-WORKING WIDTH 2000 MM with DESTILLATION-SATURATED STEAM-COOLING-CLEANING UNIT of 4 BRUSHES-IMPREGNATION DEVICE and TANKS-YEAR of CONSTRUCTION 1993
0.00
EURO
ex mill floor
2009-02-25
UM 45.219.10520
1 COMPLETE SECOND HAND SEWING LINE DESIGNED as LADY GARMENT PLANT with STEAM PRESS-IRONING-PFAFF, SINGER & DÜRKOPP SEWING UNITS-STEAMER-CUTTING-YEAR of CONSTRUCTION unknown
0.00
- not spec -
2009-02-24
UM 24.136.10510
1 LENZING SECOND HAND EXTRUDING LINE DESIGNED for PP MODEL LEH 1/90/26/EH 9025 with SCREW PRESS-DRIVING MOTORS-SHUNT MOTOR-HEATING DEVICE-COOLING DEVICE-YEAR of CONSTRUCTION 1988
0.00
EURO
FOT
2009-02-19
UM 27.61.10501
22 SULZER RÜTI SECOND HAND WEAVING MACHINES DESIGNED as PRIJECTILE LOOMS for SYNTHETICS MODEL P7150 S390 N4 SP D12-WORKING WIDTH 3900 MM-SPLIT BEAM ARRANGEMENT-4 COLOURS-STÄUBLI ELECTRONIC DOBBY MODEL 2665 D- 16 LEVERS-YEAR of CONSTRUCTION 2000/2001
0.00
EURO
FOT
2009-02-17
UM 35.128.10508
1 FUTURTEX NEW MADE DYEING INSTALLATION DESIGNED for KNITTING, WEAVING, HAND KNITTING, CARPET and FURNISHING MODEL TURBOMATIC with CONTINUOUS LIQUOR CIRCULATION-TAKE-UP on HANKS-HIGH DEGREE for COLOUR FIXATION with COMPUTER CONTROLL & SOFTWARE
0.00
- not spec -
2009-02-17
UM 35.91.10487
1 ATYC SECOND HAND DYEING INSTALLATION DESIGNED as HIG TEMPERATURE OVER FLOW DYEING APPARATUS - MODEL AIRTINT EVO HT 2 FL - NOMINAL FABRIC CAPACITY 300 KG with ATYC PROGRAM CONTROLLER type 737 - YEAR of CONSTRUCTION 1998
0.00
EURO
FOT
2009-02-16
UM 35.91.10503
1 ATYC SECOND HAND DYEING INSTALLATION DESIGNED as HIG TEMPERATURE OVER FLOW DYEING APPARATUS - MODEL AIRTINT EVO HT 4 - NOMINAL FABRIC CAPACITY 600 KG with ATYC PROGRAM CONTROLLER type 737 - YEAR of CONSTRUCTION 1998
0.00
EURO
FOT
2009-02-16
UM 35.200.10502
1 RENZACCI & TRIVENETA SECOND HAND COMPLETE WASHING- and DRYING LINE DESIGNED for PIECES-CAPACITY 520 KG approx. TOTAL with 7 RENZACCI WASH MACHINES and 8 TRIVINETA DRYERS-STAINLESS STEEL WASHING DRUMS-YEAR of CONSTRUCTION 1994/1995
0.00
EURO
C&F
2009-02-13
UM 27.61.10499
2 SULZER RÜTI SECOND HAND WEAVING MACHINES DESIGNED as PROJECTILE LOOMS for FILAMENTS MODEL P7100 S 360 N4 SP-WORKING WIDTH 3600 MM-PLIT BEAM ARRANGEMENT-4 COLOURS-STÄUBLI ELECTRONIC DOBBY MODEL 2600 -18 SHAFTS-YEAR of CONSTRUCTION 1989
0.00
EURO
FOT
2009-02-12
UM 35.196.10482
1 ATYC SECOND HAND DYEING MACHINE DESIGNED as JUMBO HIGH TEMPERATURE DYE JET MODEL TECHNODYE JUMBO 900 with 4 ROPES - 2 HEADS - CAPACITY 900 KG and ADDITIONAL TANK-YEAR of CONSTRUCTION 1997
0.00
EURO
FOT
2009-02-05
UM 43.331.10465
1 JENBACHER ENERGIE SECOND HAND GENERADOR DESIGNED as CO-GENERATION PLANT - TOTAL POWER 3,4 MEGAWATT in 2 INDEPENDENT GENERATORS of 1,7 MEGAWATT EACH - GAS SYSTEM - YEAR of CONSTRUCTION 1998
0.00
EURO
ex mill floor
2009-02-04
UM 24.239.10476
8 AMSLER SECOND HAND SLUBBING DEVICE SERVO MOTORS MODEL SM R77M-3000 + 09-SONDER with INSTALLED POWER of 2,84 kW - YEAR of CONSTRUCTION UNKNOWN
0.00
ex mill floor
2009-02-03
UM 30.336.10468
9 DIFFERENT SECOND HAND CROCHET MACHINES DESIGNED for FRINGING and NARROW FABRICS of 4 x VRC V-RIUS-CLAPERS-3 x RIMOLDI COMEZ and 2 x OBIOLS all MACHINES COMPLETE with CREEL-YEAR of CONSTRUCTION around 1989
0.00
EURO
ex mill floor
2009-01-30
UM 38.298.10453
1 SANTEX SECOND HAND COMPLETE FINISHING LINE DESIGNED for TUBULAR KNITTED FABRICS - MAX. WORKING WIDTH 1200 MM with SANTASPREAD - SANTASHRINK - SANTASTRETCH - HEATING SYSTEM with STEAM - YEAR of CONSTRUCTION 1989
0.00
- not spec -
2009-01-23
UM 24.69.10443
1 SWA SECOND HAND WINDING MACHINE DESIGNED as BALLING MACHINE with 12 HEADS DESIGNED for PRODUCTION of BALLS of 500 GRAMS for ACRYL, WOOL and COTTON with HORIZONTAL LAST WINDING on EACH BALL-ADJUSTABLE SPEED-FEEDING CREEL from BOBBINS or CONES-YEAR 2001
0.00
EURO
FOT
2009-01-19
UM 34.100.10416
1 TEXTIMA SECOND HAND SINGLE LAYER STENTER DESIGNED for WOVEN FABRICS - WORKING WIDTH 3400 MM with GOLLER FINISHING FOULARD-VERTICAL return PIN CHAIN-6 CHAMBERS ELECTRICALLY and STEAM HEATED - COOLING FIELD - BIG BATCH WINDER - YEAR of CONSTRUCTION 1989
0.00
EURO
FOT
2009-01-09
UM 24.159.10425
1 set of 3 DIFFERENT SECOND HAND TWISTING MACHINES DESIGNED as FANCY TWISTERS of 2 x SAURER MODEL ESP-F with 48 POSITIONS-1 x LEZZENI MODEL FTF/DFC 210 with 84 POSITIONS and ADDITIONAL ONE SAURER MODEL BRF 2 WINDING MACHINE-YEAR of CONSTRUCTION 1998/2000
0.00
- not spec -
2009-01-09
UM 41.330.10136
1 JENBACHER SECOND HAND MOTOR GENERATOR MODEL JMS 616-GAS FED of 1'942 kW-ONE STANFORD ALTERNATOR MODEL LVSI 814 D2 of POWER 2'500 KVA, 690 V-CEA STEAM GENERATOR GAS HEATED-1'600 kg STEAM POR HOUR-7,5 bar-YEAR of CONSTRUCTION 1997
0.00
EURO
ex mill floor
2008-11-26
UM 27.61.10354
23 SULZER SECOND HAND PROJECTILE WEAVING MACHINES DESIGNED for COTTON YARNS MODEL P7300 B430 N4 SP R-REINFORCED-WORKING WIDTH 4300 MM-SPLIT BEAM ARRANGEMENT-4 COLOURS-STÄUBLI ELECTRONIC DOBBY MODEL 2665 M4-18 SHAFTS-YEAR of CONSTRUCTION 2004
0.00
EURO
C&F
2008-11-21
UM 34.104.10346
1 PAGANINI SECOND HAND SHRINKING MACHINE DESIGNED for KNITTED GOODS for SANORISING EX SHOWROOM-WORKING WIDTH 2200 MM with STEAMER-SHRINKING with RUBBER BELT-FELT CALANDER-DRYING CYLINDER-YEAR of CONSTRUCTION 2004
0.00
- not spec -
2008-11-20
UM 27.61.10331
20 SULZER SECOND HAND PROJECTILE WEAVING MACHINES DESIGNED for COTTON, JUTE and LINEN MODEL P7150 460 N1 EP- WORKING WIDTH 4600 MM-SINGLE COLOUR-CAM MOTION for HARD FIBERS-BEAM FLANGES Ø 1600 MM-YEAR of CONSTRUCTION 2002
0.00
EURO
ex mill floor
2008-11-11
UM 34.98.10286
1 BRÜCKNER SECOND HAND SINGLE LAYER STENTER DESIGNED for WOVEN FABRICS-WORKING WIDTH 3200 MM with KÜSTERS FINISHING FOULARD-WEFT STRAIGHTNER-HORIZONTAL RETURN PIN CHAIN-4 CHAMBERS THERMAL OIL HEATED-BATCHER-YEAR of CONSTRUCTION 1978
0.00
EURO
ex mill floor
2008-11-07
UM 42.169.9926
1 BYWATER SECOND HAND NEEDLING MACHINE DESIGNED as NEEDLE LOOM - WORKING WIDTH 3700 MM - NEEDLE DENSITY 4500 NEEDLES / LIN M - STROKE 60 MM - TWO SPARE NEEDLE BOARDS - YEAR of CONSTRUCTION 1982 approx.
0.00
EURO
FOT
2008-11-04
UM 25.253.10262
1 PLANTEX complete SECOND HAND BCF LINE DESIGNED as FILAMENT EXTRUSION PLANT for POLYAMID and POLYPROPYLEN with 3 EXTRUDERS-1 SPINHEAD-9 PUMPS-3 SPIN POSITIONS with TEXTURISING SYSTEM of 3 POSITIONS-YEAR of CONSTRUCTION 1998
0.00
EURO
ex mill floor
2008-11-04
UM 34.104.9191
3 SUPERBA second hand YARN SHRINKING and STEAMING MACHINE model SPIROVAP WPFU of 10 HEADS and LINKED with 1 SSM made WINDING MACHINE model SM251-S of 10 POSITIONS, WAXING DEVICE, built in 1989 year
0.00
EURO
ex mill floor
2008-11-03
UM 26.58.10300
1 GA.MA.TEX SECOND HAND WARPING MACHINE DESIGNED as SECTIONAL WARPER MODEL G405-WORKING WIDTH 3300 MM with BEAMING DEVICE up to BEAM FLANGES Ø 1000 MM-WAXING DEVICE and 2 CREELS each 640 ENDS-YEAR of CONSTRUCTION 1990
0.00
EURO
FOT
2008-11-03
UM 28.65.10259
2 GILBOS SECOND HAND WINDERS DESIGNED as AUTOMATIC CONE WINDING MACHINES MODEL AXWIL AW5 - TR12 EACH with 12 WINDING POSITIONS - TRAVERSE 125 MM - CYLINDRCAL TUBES - AUTOMATIC DOFFING - YEAR of CONSTRUCTION 1990
0.00
- not spec -
2008-09-18
UM 34.101.10241
1 BRÜCKNER SECOND HAND SINGLE LAYER STENTER DESIGNED for WOVEN FABRICS-WORKING WIDTH 2200 MM with 2-BOWL FINISHING FOULARD-VERTICAL RETURN PIN CHAIN-6 CHAMBERS STEAM HEATED-SELVEDGE GLUEING DEVICE-YEAR of CONSTRUCTION 1992
0.00
- not spec -
2008-09-10
UM 34.325.10205
1 SUCKER & MÜLLER FINISHING MACHINE DESIGNED as GRINDING MACHINE - WORKING WIDTH 1800 MM with 4 GRINDING CYLINDERS - DUST EXTRACTION - NOISE PROTECTION CABIN - WINDER - YEAR of CONSTRUCTION 1989
0.00
EURO
ex mill floor
2008-09-03
UM 34.185.10042
1 BSH (BABCOCK) SECOND HAND CONDENSING RANGE type HOTFLUE - WORKING WIDTH 2400 MM - 4 CHAMBERS DIRECT GAS HEATED max 250°C TEMPERATURE - J:BOX ATE ENTRY and EXIT - COOLING FIELD - BIG BATCH WINDER - YEAR of CONSTRUCTION 1971
0.00
EURO
ex mill floor
2008-08-22
UM 41.322.9710
1 BIANCO and ERHARD & LEIMER SLITTING MACHINE DESIGNED for TUBULAR KNITTED GOODS with TURNING PLATE - WORKING WIDTH 2400 MM - ROPE OPENER - OPTICALLY GUIDED SLITTING with PLAITER - MADE in 1987 YEAR
0.00
EURO
ex mill floor
2008-07-30
UM 23.44.10159
1 SML LENZING complete SECOND HAND SPINNING LINE DESIGNED for POY MULTIFILAMENT SPINNING consisting TRANSPORT- and DOSING SYSTEM-PIPE ADJUSTEMENT-4 YARN BEAMS-4 SPIN PUMPS-APRETURE SPINNING UNIT-HANGING SPINNING MOBS-YEAR of CONSTRUCTION 1999
0.00
- not spec -
2008-07-24
UM 34.104.10146
2 CROON & LUCKE SECOND HAND SHRINKING MACHINES DESIGNED for YARN SHRINKING each WITH 10 BELTS and LINKED with FADIS WINDER of 20 SPINDLES-METER COUNTER-WAXING DEVICE and CORRECT YARN FEEDING DEVICE-YEAR of CONSTRUCTION 1993
0.00
EURO
FOT
2008-07-21
UM 34.101.10084
1 BRÜCKNER SECOND hand SINGLE LAYER STENTER DESIGNED for WOVEN FABRICS-WORKING WIDTH 3200 MM-KÜSTERS FINISHING FOULARD -BIANCO WEFT STRAIGHTENER-HORIZONTAL return PIN CHAIN-9 CHAMBERS STEAM HEATED-DYE BEAM WINDER-YEAR of CONSTRUCTION 1983
0.00
EURO
ex mill floor
2008-0